Sewage sludge (SS) is a by-product of processes conducted during the treatment of wastewater. It can be used in many different ways. One of them is the use of SS in agriculture as an organic fertiliser, but the main criterion for such use is the heavy metals (HMs) content. Knowledge of the total content of HMs in SS does not translate into the danger it may pose. The toxicity of metals is largely dependent on their mobility. The mobility of SS from three different wastewater treatment plants (WWTP) of the Świętokrzyskie Voivodeship, which were characterised by an increased zinc content, was examined in this study. The aim of the study was to prove whether the high level of zinc in SS actually disqualifies the possibility of its natural use. Calculations were made for five environmental hazard indicators: the geoaccumulation index of heavy metals in soil (I_geo), potential environmental risk indicator (PERI), risk assessment code (RAC), environmental risk factor (ERF), and the authors’ own environmental risk determinant (ERD) indicator. The obtained results show how important mobility analysis is when assessing the possibility of natural use of SS.

Sewage sludge (SS) from wastewater treatment plants (WWTPs) has important soil-forming and fertilizing properties. However, it may not always be used for this purpose. One of the main reasons why SS cannot be used for natural purposes is its heavy metal (HM) content. SS from the wastewater treatment plant in Poland was subjected to an analysis of the potential anthropogenic hazard of HMs, especially in terms of their mobility and accumulation in soil. Calculations were made for the concentrations of HMs in SS from the analyzed wastewater treatment plants and in arable soil from measurement points in places of its potential use. The geoaccumulation index (GAI), potential environmental risk index (PERI), risk assessment code (RAC) and environmental risk determinant (ERD) were calculated. Then the values of the indicators were compared with the mobility of HMs, which was the highest risk of soil contamination. It was shown that a high level of potential risk and geoaccumulation indicators did not necessarily disqualify the use of SS, provided that HMs were in immovable fractions.

More and more attention in sewage sludge management is being devoted to its environmental utilization. This approach is justified both from economic and environmental points of view. However, as with any method, there are certain possibilities and limitations. The goal of the natural utilization of sewage sludge is to recover the valuable agronomic properties and fertilizing potential of the sludge. The main aspect limiting the possibility of using sludge as a fertilizer is the heavy metal content. In this paper, an analysis of the risk of environmental contamination in the case of application of sewage sludge with different forms of sludge treatment was carried out. Risk indices such as Igeo and PERI, based on the comparison of total metal content in sludge and soil, as well as RAC and ERD indices, which take into account the mobility of metals in soil, were calculated. It was shown that high levels of potential risk and geoaccumulation indicators do not necessarily disqualify the use of sewage sludge, the key aspect is the form of mobility in which the heavy metals are found in the sludge, and this should be the only aspect taken into account for the possibility of their environmental use.

Sewage sludge from sewage treatment plants has soil-forming and fertilising properties. However, sewage sludge cannot always be used in nature, including agriculture. One of the main reasons is the concentration of heavy metals. Sludge from wastewater treatment plants operating in MBR (membrane biological reactor) and SBR (sequential batch reactor) systems was analysed. Studies comparing the risk analysis of the natural use of sludge from MBR and SBR treatment plants were performed for the first time, due to the fact that more and more MBR plants, which are a BAT technology, are being developed in Poland, displacing the classical SBR plants. MBR technology uses a combination of activated sludge and filtration with microfiltration membranes. Wastewater treated in these reactors meets the highest quality standards, both in terms of physicochemical and microbiological aspects. This paper presents studies on the mobility of heavy metals in sewage sludge carried out using the BCR sequential extraction method. Geo-accumulation index (GAI), potential environmental risk index (ER), risk assessment code (RAC), and environmental risk determinant (ERD) were calculated. Heavy metals dominated the stable fractions in all cases. Furthermore, an increased content of copper and cadmium was observed in the MBR sludge. This fact is favourable in view of the efforts to eliminate heavy metals in the environment.

Electrical cables are a potential source of ignition and fire hazards in various types of buildings and industrial installations, as well as in all modes of transportation, including aircraft. Fires in buildings pose the greatest threat to human life and health. The composition of thermal degradation products depends mainly on the type of combustible materials and the type of combustion process—flaming or smoldering. The purpose of this paper was to determine, based on experimental studies, the effects of flaming and smoldering combustion on the response times of fire smoke detectors. In addition, the concentrations of fire gases formed in the process of duct combustion, including CO, SO₂, NO₂, NO, HCN, HCl, HBr and HF, were measured using an FTIR spectrometer. The results presented confirm the significant effect of the way the cable samples burned on detector tripping time. The highest concentration of smoke (Y) in the test chamber was obtained during flame combustion. It was further found that the characteristics of the cable insulation material used, such as the type of PVC, had a significant effect on the toxicity of the emitted gases. The largest amounts of toxic gases were emitted during the smoldering combustion of a cable with a plasticized PVC sheath.