In this work, we introduce and use an innovative approach for adaptive piecewise linear interval approximation of sensor characteristics, which are differentiable functions. The aim is to obtain a discreet type of inverse sensor characteristic, with a predefined maximum approximation error, with minimization of the number of points defining the characteristic, which in turn is related to the possibilities for using microcontrollers with limited energy and memory resources. In this context, the results from the study indicate that to overcome the problems arising from the resource constraints of smart devices, appropriate “lightweight” algorithms are needed that allow efficient connectivity and intelligent management of the measurement processes. The method has two benefits: first, low-cost microcontrollers could be used for hardware implementation of the industrial sensor devices; second, the optimal subdivision of the measurement range reduces the space in the memory of the microcontroller necessary for storage of the parameters of the linearized characteristic. Although the discussed computational examples are aimed at building adaptive approximations for temperature sensors, the algorithm can easily be extended to many other sensor types and can improve the performance of resource-constrained devices. For prescribed maximum approximation error, the inverse sensor characteristic is found directly in the linearized form. Further advantages of the proposed approach are: (i) the maximum error under linearization of the inverse sensor characteristic at all intervals, except in the general case of the last one, is the same; (ii) the approach allows non-uniform distribution of maximum approximation error, i.e., different maximum approximation errors could be assigned to particular intervals; (iii) the approach allows the application to the general type of differentiable sensor characteristics with piecewise concave/convex properties.

The popularity of smart sensors and the Internet of Things (IoT) is growing in various fields and applications. Both collect and transfer data to networks. However, due to limited resources, deploying IoT in real-world applications can be challenging. Most of the algorithmic solutions proposed so far to address these challenges were based on linear interval approximations and were developed for resource-constrained microcontroller architectures, i.e., they need buffering of the sensor data and either have a runtime dependency on the segment length or require the sensor inverse response to be analytically known in advance. Our present work proposed a new algorithm for the piecewise-linear approximation of differentiable sensor characteristics with varying algebraic curvature, maintaining the low fixed computational complexity as well as reduced memory requirements, as demonstrated in a test concerning the linearization of the inverse sensor characteristic of type K thermocouple. As before, our error-minimization approach solved the two problems of finding the inverse sensor characteristic and its linearization simultaneously while minimizing the number of points needed to support the characteristic.

Over the last two decades, the use of photovoltaic panels for the production of electricity has increased significantly, which leads to the need to solve the problems concerning the decommissioning and disposal of the panels and the development of appropriate technologies for their recycling. One of the key steps in this process is the separation of the tempered glass layer. Various technologies and devices are known for separating the glass of the solar panel by cutting it with a knife, as well as other instruments, with the different methods being based on mechanical, chemical, and thermal processes and accordingly having their own advantages and disadvantages. This article proposes an innovative approach for the mechanical delamination of solar panels using a metal wire heated by Joule heating, with the potential to become an energy-efficient, economical, and environmentally friendly method. This publication presents results from experiments using this type of tool to separate the layers of solar panels. Photos from a thermal camera are presented, showing the heat distribution in the panel and the reached operating temperature of the heated metal wire, necessary to soften the EVA bonding layer.

This research work studies the characteristics of wear and wear resistance of composite powder coatings, deposited by supersonic flame jet (HVOF), which contain composite mixtures Ni-Cr-B-Si having different chromium concentrations—9.9%, 13.2%, 14%, 16%, and 20%, at one and the same size of the particles and the same content of the remaining elements. The coating of 20% Cr does not contain B and Si. Out of each powder composite, coatings have been prepared without any preliminary thermal treatment of the substrate and with preliminary thermal treatment of the substrate up to 650 °C. The coatings have been tested under identical conditions of dry friction over a surface of solid, firmly-attached, abrasive particles using tribological testing device “Pin-on-disk”. Results have been obtained and the dependences of the hardness, mass wear, intensity of the wearing process, and absolute and relative wear resistance on the Cr concentration under identical conditions of friction. It has been found out that for all the coatings the preliminary thermal treatment of the substrate leads to a decrease in the wear intensity. Upon increasing Cr concentration the wear intensity diminishes and it reaches minimal values at 16% Cr. In the case of coatings having 20% Cr concentration, the wear intensity is increased, which is due to the absence of the components B and Si in the composite mixture, whereupon no inter-metallic structures are formed having high hardness and wear resistance. The obtained results have no analogues in the current literature and they have not been published by the authors.

In the last two decades the use of photovoltaic panels for the production of electricity has increased significantly, which leads to the need to solve the problems related to the end-of-life disposal of the panels and the development of appropriate technologies for their recycling. One of the key steps in this process is the separation of the tempered glass layer. Various technologies and devices are known for separating the glass of the solar panel by cutting with a knife, as well as other instruments, with the different methods being based on mechanical, chemical and thermal processes and accordingly having their own advantages and disadvantages. This article proposes an innovative approach for mechanical delamination of solar panels using a metal wire heated by Joule heating, with the potential to become an energy-efficient, economical and environmentally friendly method. The publication presents results from experiments using this type of tool to separate the layers of solar panels. Photos from a thermal camera are presented, showing the heat distribution in the panel and the reached operating temperature of the heated metal wire, necessary to soften the EVA bonding layer.