This research investigates the efficacy of zinc oxide (ZnO) tubes in decontaminating polluted water using a substrate-free hydrothermal synthesis process for ZnO tubes. The synthesized tubes are impregnated into calcium alginate microfibres, strategically chosen for their high surface area to enhance photocatalytic degradation performance and for practical handling during decontamination and subsequent collection, thereby preventing secondary contamination. Structural and morphological analyses, conducted using Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD), thoroughly characterize the properties of the ZnO tubes and the composite material. The efficacy of this composite is demonstrated through the photocatalytic degradation of methylene blue (MB), as a representative organic pollutant, resulting in an 88% degradation of MB after 5 hours of irradiation by a sun simulator. Cyclic tests exhibit consistent degradation levels in the first four cycles (81–89%), followed by a subsequent decrease to 72% in the fifth cycle, coinciding with the breakdown of the microfibres into shorter fragments. Innovatively, this study introduces an approach to reporting photocatalytic degradation results, utilizing normalized pollutant concentration plotted against irradiated energy instead of time, as energy encompasses irradiated power, time, and surface area. This reveals that the 88% degradation of MB is achieved by irradiating the sample with an approximately 18 kJ. Additionally, a new metric, Specific Energy Efficiency (SEE), is introduced. It expresses the ratio of degraded pollutant mass to the mass of photocatalytic active material per unit of irradiated energy, with the maximum and cumulative SEE in this study being 1.044 μg g−1 J−1 and 326 ng g−1 J−1, respectively. This research not only contributes to the understanding of ZnO tubes' efficiency in polluted water decontamination but also introduces valuable insights for standardized reporting in photocatalytic degradation studies.
Splenomegaly, defined as an abnormal enlargement of the spleen, is a critical radiological finding associated with a spectrum of serious health conditions, particularly liver disorders and hematologic malignancies. While Computed Tomography (CT) scans are commonly utilized in clinical settings to detect and assess the severity of splenomegaly, recent studies have demonstrated its potential to reveal new insights into the underlying causes of splenomegaly, such as liver cirrhosis and lymphoma, when integrated with machine and deep learning models. This enables patients to receive timely and appropriate treatment, thereby reducing the risk of complications. However, research in this area remains in its early stages, primarily due to the limited availability of real-world datasets required to develop and train robust Artificial Intelligence (AI)-based models.
Flexible thermoelectric generators (TEGs) featuring out-of-plane thermoelement architecture and operating without internal interconnects are essential for achieving efficient power generation. In this work, a flexible TEG is designed and fabricated featuring monolithically integrated p -type single-walled carbon nanotube (SWCNT)/poly(3,4-ethylenedioxythiophene): polystyrene sulfonate composite films and n -type SWCNT films arranged in an out-of-plane configuration. This monolithic architecture eliminates the internal metallic interconnects, substantially reducing the internal resistance and enhancing the temperature gradient (Δ T ) across the device. The thermoelectric films, prepared by vacuum filtration and drop-casting, exhibit Seebeck coefficients of 52.7 µV/°C for the p -type and − 42.1 µV/°C for the n -type films. Finite element analysis of the TEG confirmed a linear dependence of the open-circuit voltage ( Voc ) on Δ T , consistent with theoretical predictions. The fabricated flexible TEG, consisting six p - and n -type thermoelement pairs, generated Voc values approximately 3.48 mV and 14 mV under Δ T of 10.1 °C and 30.6 °C, respectively. Correspondingly, a maximum output power of approximately 1.6 µW and an areal power density of 0.9 µW/cm² was achieved by the TEG at a Δ T of 30.6 °C. These findings demonstrate a simple and scalable route toward architecturally optimized flexible TEGs based on monolithically integrated thin-film thermoelements.