Bayurzhan Kelamanov

Bayurzhan Kelamanov


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2024 in Heliyon
Verified
Journal Article
Open access
OSO. Sariyev
O. Sariyev
BKBayurzhan Kelamanov
Bayurzhan Kelamanov
MDM. Dossekenov
M. Dossekenov
ADA. Davletova
A. Davletova
YKYe Kuatbay
Ye Kuatbay
Michael GasikMichael Gasik
Michael Gasik
This paper presents the results of research on the method of utilization of self-disintegrating slags of refined ferrochrome production by autoclave carbonization in carbon dioxide environment. The work has a complex character, including earlier laboratory studies of the slag carbonization process under different conditions, as well as studies of chemical and mineralogical composition of initial waste slags taken from the slag dump and samples of bricks subjected to carbonization. The composition of slags and obtained products was investigated by XRD, DTA, DTG and XRF analyses, which showed that the main phases of the studied samples are dicalcium silicate, montichelite, periclase, magnesiochromite, calcite. Thermal analytical studies showed that magnesium carbonate is present only in the samples of artificially carbonized material. Also, the process of carbonate formation in the thickness of bricks during forced carbonization was investigated. As a result, it was obtained that with increasing CO2 pressure, the amount of bound carbon in the products increases proportionally in all layers. It was determined that the amount of CO2 absorbed during carbonization can reach 20 % of the mass of the initial slag. Stale slag can be used simultaneously as a carbon dioxide absorber and as a building product.

21 April 2025 in Processes
Verified
Journal Article
Open access
PDF file
AAAssylbek Abdirashit
Assylbek Abdirashit
BKBayurzhan Kelamanov
Bayurzhan Kelamanov
OSOtegen Sariyev
Otegen Sariyev
DYDauren Yessengaliyev
Dauren Yessengaliyev
AAAigerim Abilberikova
Aigerim Abilberikova
ANAlibek Nazargali
Alibek Nazargali
This article presents the results of laboratory studies on the smelting of nickel–chromium-containing ferroalloys from low-grade nickel ores from Kazakhstan. X-ray phase analysis was performed on raw materials, which included quartz, nontronite, chromium metahydroxide, goethite, magnetite, iron chromite, and nickel (II) silicate. The reduction reactions of metal oxides with carbon and carbon monoxide were studied as the temperature increased. Experimental smelting was carried out in a Tammann furnace at 1500–1550 °C using three types of reducing agent: RK coke, as well as its mixtures with low-ash Shubarkol coal, in ratios of 75:25 and 50:50. The second option demonstrated the highest economic efficiency, achieving a 91% nickel recovery rate, reduced coke consumption, and a slag-to-metal ratio of 3.07. Chemical analysis showed that the nickel content in the obtained alloys ranged from 2.5% to 6.5%, while chromium content ranged from 2.6% to 4.5%. X-ray phase analysis confirmed the presence of Fe2Ni0.6Si, Fe5Si3, and Fe2CrSi phases in the alloy structure. Local element concentrations varied within the following ranges: Fe—55–59%, Ni—2–10%, Cr—2–7%, and Si—29–35%. The results of this study confirmed the feasibility of producing a nickel–chromium-containing alloy with a nickel content of 2–10% and a chromium content of 2–7%.

19 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
OSOtegen Sariyev
Otegen Sariyev
AAAssylbek Abdirashit
Assylbek Abdirashit
MAMaral Almagambetov
Maral Almagambetov
NNNurzhan Nurgali
Nurzhan Nurgali
BKBayurzhan Kelamanov
Bayurzhan Kelamanov
AMAzamat Mukhambetkaliyev
Azamat Mukhambetkaliyev
Fine classes of metal dust generated during the production of ferroalloys increase the likelihood of irretrievable losses, creating the prerequisites for the development of rational methods for processing this material. One of the known technologies for recycling dispersed raw materials in metallurgical processing is their direct remelting. Although this technology is easily feasible, it has several significant drawbacks, among which the main problem remains the high dust carryover of fine material by ascending gas-thermal flows. A potential solution could be the preliminary preparation of raw materials through agglomeration. Domestic enterprises producing various types of ferroalloys have the necessary infrastructure and equipment for agglomerating dispersed ore materials, but the lack of experience and resource-saving technologies for processing metal dust prevents their full integration into metallurgical processing. In this regard, there is significant interest and demand from ferroalloy enterprises for the development of new methods to involve dispersed metal production waste in secondary recycling, adapted to existing agglomeration equipment. Numerous studies have shown that the cheapest method of agglomeration is briquetting. Given the advancement of briquetting technologies, as well as the use of the latest equipment and binding materials in this process, it can be assumed that this will allow for more complete integration of aspiration dust from ferrochrome crushing into metallurgical processing. To test this assumption, studies were conducted on the physicochemical properties of aspiration dust from ferrochrome crushing, assessing the possibility of obtaining an agglomerated product with the required strength parameters. The results of these studies demonstrated the fundamental possibility of producing high-carbon ferrochrome from briquetted material made from aspiration dust of ferrochrome crushing.

23 September 2024 in Metals
Verified
Journal Article
Open access
PDF file
TZTalgat Zhuniskaliyev
Talgat Zhuniskaliyev
ANAssylbek Nurumgaliyev
Assylbek Nurumgaliyev
ACAskar Chekimbayev
Askar Chekimbayev
BKBayurzhan Kelamanov
Bayurzhan Kelamanov
YKYerbol Kuatbay
Yerbol Kuatbay
AAAssylbek Abdirashit
Assylbek Abdirashit
The research presented in the article is devoted to the study of the influence of phase compounds on the friability of the Fe-Si-Mn-Al complex alloy. The urgency of the problem lies in the development of technology for producing a non-scatterable alloy from manganese-containing ores and high-ash coals. The main goal of this work is to determine the range of alloy compositions and the resulting phases that affect the dispersibility of the alloy, which is critically important for its industrial implementation. Research methods include thermodynamic diagram analysis (TDA) using data on the standard enthalpy of formation of intermetallic compounds, as well as experimental tests in an ore-thermal electric furnace with a capacity of 200 kV*A. The results show that Fe-Si-Mn-Al complex alloys form a variety of silicide and aluminide phases, including intermetallic compounds and ternary systems, which is critical for understanding and controlling their physicochemical properties. When melting a complex alloy, the content of leboite (Fe3Si7) in the Fe-Si-Mn-Al system plays a significant role. The development of melting process technology will be aimed at avoiding the FeSi2-Fe3Si7-F2(FeAl3Si2)-Mn11Si19 tetrahedron area. This approach to controlling the composition of a complex alloy is critical to ensuring its consistent friability properties in industrial applications. Thus, this work represents an important step in understanding the physical properties and stability of Fe-Si-Mn-Al complex alloys, which have potential for widespread use in metallurgical and other industrial applications.

24 July 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
TZTalgat Zhuniskaliyev
Talgat Zhuniskaliyev
ANAssylbek Nurumgaliyev
Assylbek Nurumgaliyev
ACAskar Chekimbayev
Askar Chekimbayev
BKBayurzhan Kelamanov
Bayurzhan Kelamanov
YKYerbol Kuatbay
Yerbol Kuatbay
AAAssylbek Abdirashit
Assylbek Abdirashit
The research presented in the article is devoted to the study of the influence of phase compounds on the friability of the Fe-Si-Mn-Al complex alloy. The urgency of the problem lies in the development of technology for producing a non-scatterable alloy from manganese-containing ores and high-ash coals. The main goal of the work is to determine the range of alloy compositions and the resulting phases that affect the dispersibility of the alloy, which is critically important for its industrial implementation. Research methods include thermodynamic diagram analysis (TDA) using data on the standard enthalpy of formation of intermetallic compounds, as well as experimental tests in an ore-thermal electric furnace with a capacity of 200 kV*A. The results show that Fe-Si-Mn-Al complex alloys form a variety of silicide and aluminide phases, including intermetallic compounds and ternary systems, which is critical for understanding and controlling their physicochemical properties. When smelting a complex alloy, the content of leboite (Fe3Si7) in the Fe-Si-Mn-Al system plays a significant role. The development of smelting technology will be aimed at avoiding the FeSi2-Fe3Si7-F2(FeAl3Si2)-Mn11Si19 tetrahedron area. This approach to controlling the composition of a complex alloy is critical to ensuring its consistent friability properties in industrial applications. Thus, this work represents an important step in understanding the physical properties and stability of Fe-Si-Mn-Al complex alloys, which have potential for widespread use in metallurgical and other industrial applications.

30 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
BSBakyt Suleimen
Bakyt Suleimen
NKNurlybay Kosdauletov
Nurlybay Kosdauletov
GAGalymzhan Alibekovich Adilov
Galymzhan Alibekovich Adilov
PGPavel Александрович Gamov
Pavel Александрович Gamov
SSSemen Salikhov
Semen Salikhov
AAAssylbek Abdirashit
Assylbek Abdirashit
Reduction of iron in high-phosphorus oolitic ore from the Lisakovsk deposit using solid carbon, carbon monoxide, and hydrogen. An X-ray phase analysis was used to determine the phase composition of the samples after reduction roasting. When reduced with carbon monoxide or hydrogen, α-iron appears in the samples, while phosphorus remains in the form of iron, calcium, and aluminum phosphates. After roasting with solid carbon, phosphorus is reduced from iron and calcium phosphates and migrates into the metal but remains in aluminum phosphate. A micro X-ray spectral analysis showed that at a temperature of 1000 °C and a holding time of 5 h, during reduction with solid carbon, the phosphorus content in the metallic phase reaches up to 7.1 at. %. When reduced with carbon monoxide under the same conditions, the metallic phase contains only iron, and phosphorus is found only in the oxide phase. When reduced with hydrogen at 800 °C, phosphorus is almost absent in the metallic phase, but at 900 °C, phosphorus is reduced and its content in the metallic phase reaches 2.1 at. %.