This study numerically analyzes the thermal-fluid performance of supercritical hydrogen in regenerative cooling channels with aspect ratios (AR) ranging from 1 to 8 for rocket engine combustion chambers. The study investigates the effects of channel geometry and inlet Reynolds number on heat transmission efficiency, flow behavior, and pressure drop. The SST k-ω turbulence model was validated and utilized in ANSYS FLUENT (2024 R1, (Ansys Inc., Canonsburg, PA, USA) CFD simulations to examine temperature distributions, turbulent kinetic energy, and velocity profiles. The results show that convective heat transfer is improved with higher Reynolds numbers, while pressure drops are increased; the best range for balanced performance is found to be between 35,000 and 45,000. The aspect ratio significantly influences thermal performance; increasing it from 1 to 8 reduces peak wall temperatures by 12–15% but exacerbates thermal stratification and pressure losses. An intermediate aspect ratio (AR = 2–4) was found to optimize both heat transfer enhancement and hydraulic performance. The study provides critical insights for optimizing cooling channel designs in high-performance rocket engines, addressing the trade-offs between thermal efficiency and flow dynamics under extreme operating conditions.
This paper presents a control method for achieving precise robotic contact on complex and curved surfaces in manufacturing and automation. The method combines smooth trajectory planning with contact force control to improve finishing accuracy while reducing processing time. It integrates a Bézier curve with a simplified hexic polynomial implemented through a position-based impedance controller that is enhanced by a novel force corrector unit. The model is referred to as the Adaptive Bézier–Based Impedance Constant Force Controller (ABBIFC), where the Bézier curve length is calculated using Simpson’s rule, and surface orientations are interpolated using quadratic quaternions. A hexic polynomial velocity profile ensures consistent motion speed throughout the process. This method effectively regulates both contact force and positional accuracy, resulting in high-quality surface finishes. Simulation studies and real-time polishing experiments demonstrate the system’s capability to accurately track path, speed, and force, with significantly reduced force errors. This approach advances robotic automation in applications such as polishing, grinding, and other surface finishing tasks by ensuring smooth motion and precise force control.
Formulating mathematical models and deriving efficient algorithms are crucial for meeting the requirements of future robotics applications. This paper proposes a novel approach for analyzing kinematic systems and computing inverse kinematics (IK) solutions for serial robotic arms. The aim is to reduce modeling complexity and the computational cost of IK solution algorithms, while enhancing accuracy and efficiency by reformulating the kinematic equations using simplified constraints. This is achieved by integrating the rotation matrix and the unit quaternion to represent kinematic equations in a simple and unified form without compromising the degrees of freedom or raising the order of the kinematic equations, as in traditional approaches. The method combines analytical and numerical techniques to obtain an exact IK solution in two steps: first, the wrist joint variables are substituted into the position equations, resulting in a modified position vector equation obtained analytically; second, numerical iteration is applied to compensate for the error between the current and desired positions, leading to the ultimate exact inverse solution. The method is tested on a 5R robot and a 6R (UR-10) robot with an offset wrist to demonstrate the mathematical process and real-time algorithm performance. The results demonstrate that the absolute position error is less than m, with no orientation error, and the mean calculation time for the IK solution is less than 5 ms. Furthermore, the results indicate higher accuracy and reduced computational time compared to other common IK methods. Moreover, the algorithm’s improved performance in processing continuous paths demonstrates its advantages in both simulation and practical applications. Finally, the proposed methodology is expected to advance further research in kinematic modeling and enhance polynomial-based numerical iterative algorithms.
1 January 2026 in Computer Modeling in Engineering & Sciences
Accurate force regulation is essential in robotic contact tasks such as polishing, grinding, and assembly. However, conventional impedance controllers often exhibit limited force-tracking accuracy, while adaptive methods require high tuning effort and computational cost. To address these issues, this paper proposes a Constant Impedance Force Controller (CIFC) based on a Force Reference Dependent Impedance (FRDI) model, which is developed and validated through computer modeling and simulation. Robot environment interaction is computationally modeled as a mass damper spring system, and a position-based impedance framework is employed to regulate force deviations. A compensation signal derived from the FRDI stiffness and damping terms reduces tracking errors while preserving constant impedance characteristics. Stability is proven using Lyapunov analysis. Numerical simulations and experimental validation demonstrate that the proposed method achieves robust force tracking under multi-source uncertainties on ramp, curved, and complex surfaces. The CIFC achieves an average force-tracking RMS error of 0.15 N in simulation, compared with 0.11–0.19 N for the benchmark methods. Experimentally, RMS errors range from 0.24 to 0.52 N under reference forces of 5–15 N on curved and complex surfaces, with maximum deviations of ±0.35 and ±0.50 N, respectively. These results confirm the effectiveness of the proposed modeling and simulation framework, demonstrating improved robustness and tracking consistency over conventional impedance control.
This paper presents a novel adaptive sliding mode control approach based on a model-free technique for nonlinear active suspension systems in cars. The proposed method comprises four key components: First, an intelligent proportional-integral control based on model-free principles is employed to introduce desired dynamics. Second, an extended state observer is utilized to estimate the system’s nonlinearities and unknown dynamics. Third, an integral sliding surface is integrated to eliminate the reaching phase, along with a noise-sensitive switching mechanism. Last, adaptive gain dynamics are incorporated to improve accuracy. This controller offers several advantages, including its simple structure and ease of adjustment. The study also includes analyses of theoretical system stability, convergence speed, and control accuracy. Finally, the proposed approach is validated using MATLAB simulations and compared with a recent paper on a two-degree-of-freedom nonlinear quarter-car active suspension system.