The article considers the possibilities of using decarbonization technologies in the production of steel products. The world experience of using advanced technologies is generalized and the possibilities of their application in metallurgical production are presented, taking into account the emissions of carbon dioxide responsible for the greenhouse effect and global warming of the Earth. The directions of research projects in the metallurgical industry, the results and the conclusions that follow from them are presented. Possibilities of application of decarbonization technologies in the process of preparation of charge materials, production of cast iron and steel are shown. It is noted that the trend of decarbonization of steel significantly changes traditional metallurgy. At the same time, the possibilities of modern technologies of metal production do not allow to significantly abandon the use of natural gas and carbon (coal and coke) as a reducing agent and energy source in metallurgical production processes. Possibilities of modern and perspective metallurgical processes concerning production of products with the minimum carbon trace are shown. The problems facing the metallurgy of Ukraine to reduce СО2 emissions and the introduction of technologies for decarbonization of metal production are highlighted. It is shown that for the implementation of steel decarbonization processes it is necessary to take into account the following: the need for structural restructuring of the metallurgical industry; the need for radical modernization of the metallurgical industry through the introduction of fundamentally new energy-saving production technologies; limiting inefficient exports of raw materials and semi-finished products; introduction of "green" steel production technologies; strengthening the role of research in the production of metallurgical products with low carbon footprint; strengthening the interaction of science, enterprises and the state in the implementation of global projects for the production of low-carbon metallurgical products.
UTUkrainian State University of Science and Technologies
Ukrainian State University of Science and Technologies
+3
One of the main global trends in the development of the world economy is its decarbonization with the fulfillment of obligations to reduce greenhouse gas emissions. The processes of obtaining high-purity graphitized materials and ferrous metallurgy have significant consumption of energy carriers and, accordingly, emissions of greenhouse gases. Therefore, the development and implementation of innovative energy-saving technologies based on the electrothermal fluidized bed will allow to solve the emission of greenhouse gases during the production of electrode products. The purpose of the work is to determine the environmental efficiency of the implementation of innovative technology based on electrothermal fluidized bed in comparison with existing ones. The basis of the research methodology is the calculation of greenhouse gas emissions using specific emission rates during the production of electrical energy and burning of natural gas. The work proposes a methodology that takes into account the structure of electricity and fuel production in Ukraine, their types and quality. Technological costs of electricity during its transportation from stations to the consumer, specific fuel costs for electricity production are covered. Calculations were made for four variants of the technological process, which are implemented at PrJSC "Ukrgrafit" and include the stage of anthracite calcination in rotary furnaces or electrocalciners, the stage of graphitization in Achenson and Kastner furnaces. Two options of technologies with an electrothermal fluidized bed are analyzed in the work. The results of the calculations show that the proposed technology for obtaining finely dispersed artificial graphite based on anthracite from the Donetsk deposit significantly reduces greenhouse gas emissions by 2-3.5 times compared to the existing technologies of PrJSC "Ukrgrafit". Specific emissions of greenhouse gases decrease from 2500-2600 kg of CO2/t to 390-780 kg of CO2/t.
The purpose of the work is to establish the patterns of use of various fuel additives aimed at reducing carbon dioxide emissions from the blast furnace. In connection with global warming and related negative consequences in the future, the issue of reducing greenhouse gases (including CO2) is one of the most important in the world. Thus, the issue of decarbonization of the metallurgical industry of Ukraine, which accounts for about 26% of emissions, is urgent. In Ukraine during steel production, CO2 emissions are ~8% higher than in EU countries, which is primarily due to the fact that the energy intensity of blast furnace production technology in Ukraine is greater. Therefore, with the introduction of quotas for CO2 emissions (EU ETS), without the introduction of blast furnace decarbonization technologies, Ukrainian metallurgy may become uncompetitive. With the use of improved thermal energy and exergy models of blast furnace smelting, regularities were established when using PCI (as the most economical substitute for coke), natural and coke over gas for CO2 emissions and technical and economic indicators of blast furnace smelting. The best period of operation of blast furnace No. 4 with a volume of 2002 m3 of PJSC "MK "Azovstal" in 2021 was chosen as the basic calculation option. The regularities of the effect of the use of different grades of coal for pulverized coal injection (PCI) and changes in the chemical composition of PCI while maintaining the theoretical combustion temperature at a constant level on CO2 emissions and blast furnace smelting indicators have been established, which will allow a rational approach to the choice of coal for PCI, which is especially relevant in wartime and the post-war recovery of Ukraine in the conditions of the loss of the coal energy base for PCI. For the first time, the critical consumption of fuel additives was determined, at which, according to Gruner's principle, it is expected to achieve full recovery of iron by indirect means, and therefore minimum fuel consumption when reaching rd close to 0%. As a result of the work performed, the limit values of the effectiveness of the use of PCI, natural and coke gas injection technologies on carbon dioxide emissions, output of secondary energy resources and coke consumption were established.