The paper presents ground reasoning and results of experiments and modeling of heavy hollow ingot manufacturing using advanced electroslag technology. The requirements for ingots for huge diameter reactor pressure vessels include high density, homogeneity, and minimal segregation, which are very difficult to achieve by traditional casting. In the electroslag remelting process (ESR), hollow ingots form in between two copper water-cooled molds under effective heat removal. This improves the solidification pattern due to the shortening of a solidifying volume thickness more than twice compared with a solid ingot of the same diameter. The shallow liquid metal pool and narrow mushy zone at the ESR hollow ingot solidification assure their high metallurgical quality. Due to the dense and low segregation structure, ESR hollow ingots proved to be used for as-cast pipes and heavy wall billets for further forging. The results of a mathematical simulation within the range of simulated dimensions (the outer diameter up to 2900 mm, wall thickness up to 750 mm) also predict the favorable solidification pattern for thick-wall hollow ingots of big diameters. The analysis made and the modeling results provide a framework for scaling up the sizes of hollow ingots produced by ESR and widening their application for manufacturing heavy wall large diameter shells for nuclear and petrochemical industries. The higher reachable productivity of hollow ingot formation and lower capacity of power supply source than that for solid ingots of the same diameter and weight are also preconditions of their energy saving and cost-effective manufacturing.
1 June 2018 in Archives of Materials Science and Engineering
Purpose: To develop novel ESR based process for composite ingot with shallow transition zone between layers in order to produce efficient heavy-weight rotors for steam turbines. Design/methodology/approach: The nowadays heavy-weight rotors for steam turbines for power plants are monoblock or two or more layer in length composite part facilitating operation in different zones withstanding various loads and working medium. However, the joining of various steel in composite rotors by welding has low productivity. The ESR now is recognised as the best available technology for the big-diameter and mass forgings for power generating machines, including rotor ones. The ESR affords the most favourable conditions of solidification resulting in homogenous low-segregation ingot with smooth surface and high-quality structure. The step ahead is the ESR for composite. Findings: The two-layer model ingot had produced from steel grades 12Cr13 and 35NiCrMoV12-5 were manufactured using the electroslag process with the liquid metal (ESR LM) in the CSM of 180 mm in diameter with ingot withdrawing. The transition zone in two-layer ingot had have the shallow shape and low depth with the even macrostructure without defects of the same type as both joined steels. The metal of the transition zone fully satisfies standard requirements for properties of both steel grades in the heat treated and as-cast conditions. Research limitations/implications: The ESR LM can provide both the monobloc heavy ingots with uniform structure and composites with low-stress connection between metal layers for heavyweight rotors and other critical products manufacturing.
UTUkrainian State University of Science and Technologies
Ukrainian State University of Science and Technologies
+3
One of the main global trends in the development of the world economy is its decarbonization with the fulfillment of obligations to reduce greenhouse gas emissions. The processes of obtaining high-purity graphitized materials and ferrous metallurgy have significant consumption of energy carriers and, accordingly, emissions of greenhouse gases. Therefore, the development and implementation of innovative energy-saving technologies based on the electrothermal fluidized bed will allow to solve the emission of greenhouse gases during the production of electrode products. The purpose of the work is to determine the environmental efficiency of the implementation of innovative technology based on electrothermal fluidized bed in comparison with existing ones. The basis of the research methodology is the calculation of greenhouse gas emissions using specific emission rates during the production of electrical energy and burning of natural gas. The work proposes a methodology that takes into account the structure of electricity and fuel production in Ukraine, their types and quality. Technological costs of electricity during its transportation from stations to the consumer, specific fuel costs for electricity production are covered. Calculations were made for four variants of the technological process, which are implemented at PrJSC "Ukrgrafit" and include the stage of anthracite calcination in rotary furnaces or electrocalciners, the stage of graphitization in Achenson and Kastner furnaces. Two options of technologies with an electrothermal fluidized bed are analyzed in the work. The results of the calculations show that the proposed technology for obtaining finely dispersed artificial graphite based on anthracite from the Donetsk deposit significantly reduces greenhouse gas emissions by 2-3.5 times compared to the existing technologies of PrJSC "Ukrgrafit". Specific emissions of greenhouse gases decrease from 2500-2600 kg of CO2/t to 390-780 kg of CO2/t.
30 June 2020 in Metallurgicheskaya i gornorudnaya promyshlennost, №4, 2018
Мета: Метою статті є критичний аналіз та систематизація печей з електротермічним киплячим шаром, які використовуються у низько- та високотемпературних технологічних процесах у металургійній та хімічний промисловості., а також визначення конструктивних особливостей цих пічних агрегатів.Методика: Критичний аналіз конструкцій високотемпературних установок з електротермічним киплячим шаром на основі світового доробку в галузі графітації та рафінування вуглецевих матеріалів з метою отримання високочистого батарейного графіту.Результати: За результатами проведеного дослідження та критичного аналізу літературних джерел, авторами запропонована класифікація електротермічних печей киплячого шару: за температурним режимом – низько- та високотемпературні установки; та за на напрямом руху електричного струму між електродами печі крізь шар оброблюваного матеріалу – агрегати із горизонтальним та вертикальним рухом струму. Визначено відмінні особливості у схемах підведення газу та проаналізовано способи завантаження / вивантаження матеріалу.Наукова новизна: Вперше визначено взаємозв’язок можливих конструктивних характеристик електротермічних печей киплячого шару з температурним режимом їх експлуатації.Практична цінність: Результати роботи являють собою систематизований науково-технічний матеріал корисний для науковців, дослідників та інженерів задіяних в розробці нових технологій та експлуатації наявних пічних установок на основі електротермічного киплячого шару.