Ganna A. Kononenko

Ganna A. Kononenko

Auto-generated profile, based on publicly available information

Ganna A. Kononenko

Iron and Steel Institute of Z. I. Nekrasov of the National Academy of Sciences of Ukraine

Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022
Verified
Book
Closed access
LULLC «Additive Laser Technology of Ukraine»
LLC «Additive Laser Technology of Ukraine»
SASergey Adjamskiy
Sergey Adjamskiy
GKGanna Kononenko
Ganna Kononenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
SBSergey Badyuk
Sergey Badyuk
Additive technologies make it possible to provide high quality products (accuracy and uniqueness of geometry, high complex of mechanical properties, high density (low porosity), uniformity of microstructure and chemical composition). A wide range of materials used allows it to find application in such industries as medical and dental, engineering, automotive and aerospace. At present, technological capabilities, the development of laser technologies and CAD modeling systems have made it possible to develop devices for building parts by loading the original CAD model and fusing metal powder using a laser in accordance with it – what is today called SLM technology. During this process, the metal powder is completely melted under the influence of high-power laser radiation with the formation of a metal layer that contains almost no pores and does not require further processing, which makes it possible to achieve a level of mechanical properties of the product equal to or even better than those of cast ones. To create advanced equipment and professional control of the process of manufacturing parts, a deep understanding of the processes occurring in the melt pool under the laser beam and after hardening is necessary. At the same time, the final quality of products manufactured using SLM technology depends on many factors that can be divided into main groups: equipment (calibration, laser power, energy distribution in the beam, powder application system, shielding gas supply, distribution and purification system, system ensuring the tightness of the chamber, etc.), material (sphericity, dispersion, bulk density, fluidity, properties, handling, etc. of metal powder), process parameters, geometry features of the part, finishing. Prospects for the development of technology in Ukraine are associated with the development of new structural materials, solving topology optimization problems, prototyping, studying the properties of materials and creating the latest production solutions in the field of additive technologies.

28 September 2022 in Science and innovation
Verified
Journal Article
Closed access
PDF file
САС. Аджамський
С. Аджамський
ГКГ. Кононенко
Г. Кононенко
РПР. Подольський
Р. Подольський
СБС. Бадюк
С. Бадюк
Introduction. The additive manufacturing technologies have recently become more widespread in modern production, as they allow the quick and efficient manufacture of products with a unique geometry. Problem Statement. For the production of parts, it is necessary to use rational technological parameters that depend on the characteristics of the material and equipment for selective laser melting (SLM). Among the factors affecting the mechanical properties there are the sample orientation in the working chamberand the thickness of the working layer. Purpose. The purpose of this research is to study the effect of sample orientation in the direction of the X, Y, Z axes and layer thickness (40 and 20 μm) on the physical and mechanical properties of the Co-Cr-Mo alloy fabricated by the selective laser melting method. Material and Methods. All prototypes are made of Co-Cr-Mo alloy powder with a particle size of 10–45 μm. The samples are printed with layer thicknesses of 20 and 40 μm, with the use of an Alfa-150 3D printer manufactured by ALT Ukraine LLC. The samples for tensile tests are placed on the platform in horizontal (X and Y axes) and vertical (Z axis) positions. The tests to determine the mechanical properties have been carried out in accordance with ISO 6892:2019, on a PHYWE testing machine. The thermal expansion coefficient has been determined with the use of a DIL.A.802 dilatometer. Results. The dependence of the metaldensity at a constant thickness of the deposited layer of 40 and 20 μm and a distance between tracks of 0.1—0.12 mm has been established, and the rational conditionsfor manufacturing samples for tensile tests have been chosen. Conclusions. It has been established that a decrease in the intertrack distance contributes to the achievement of a density of 99.99% and an increase in the area of the rational printing conditions. It has been shown that the samples printed with different thicknesses of the working layer have different mechanical properties. When comparing samples made at different layer thicknesses and placed in the same direction, we have found that the temporary resistanceis the lowest for the vertical samples as compared with the horizontal ones in the X and Y directions.

1 January 2021 in Science and innovation
Verified
Journal Article
Closed access
PDF file
OBOleksandr Babachenko
Oleksandr Babachenko
ГКГанна Кононенко
Ганна Кононенко
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
Introduction. The conditions of operation of the railways of Ukraine and the prospects for their entry into the international system of transport corridors require the development and modernization of railway tracks, including rails. Problem Statement. Given the necessity to ensure the main operational parameter of the rails (wear resistance), regulatory and technical documents standardize hardness. The most progressive European standard EN 13674-1-2011 establishes that the hardness of the rail head at a depth of 20 mm shall be, at least, 321 HB, while DSTU 4344:2004 requires, at least, 321 HB at a depth of 11 mm. At the same time, according to EN 13674-1-2011, the rail surface hardness without the formation of needle structures shall be, at least, 405 HB. Purpose. To determine the possibility of achieving hardness without needle structures for rail head made of steel 0,80% C, 0,25% Si, 0,97% Mn, 0,055% V (hereinafter referred to as K76F), which complies with the world requirements, based on the calcination experiment and calculations with the use of the model; to determine the rational cooling rate for K76F steel during heat treatment. Materials and Methods. K76F rail steel with 0.80% C, 0.25% Si, 0.97% Mn, 0.055% V. Techniques: metallographic studies, hardness measurements, determination of calcination by end quenching, modeling by means of mathematical calculation with the use of QForm heat treatment software package. Results. The change in temperature, the formation of structure and hardness across the section of a K76F steel sample for calcination tests according to GOST5657 has been modeled. The changes in the hardness and microstructure has been experimentally established, depending on the distance to the heat sink surface; the cooling rate in the points where the hardness meets the requirements of EN 13674-1-2011 for rails has been determined. Conclusions. The analysis of the model has shown a high accuracy of the model and the convergence of the experimental results with the calculated ones. It has been established that the requirements of EN 13674-1-2011 can be achieved up to a hardness of 405 HB without the formation of needle structures on steel that meets the chemical composition of K76F according to DSTU 4344: 2004.

28 February 2024 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
OMOleksii Merkulov
Oleksii Merkulov
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
AKAnna Kononenko
Anna Kononenko
ESElena Safronova
Elena Safronova
EKEugen Klemeshov
Eugen Klemeshov

28 April 2021 in Aerospace technic and technology
Verified
Journal Article
Closed access
PDF file
САСергій Вікторович Аджамський
Сергій Вікторович Аджамський
ГКГанна Андріївна Кононенко
Ганна Андріївна Кононенко
РПРостислав Вячеславович Подольський
Ростислав Вячеславович Подольський
СБСергій Іванович Бадюк
Сергій Іванович Бадюк
Additive manufacturing technology, also known as 3D printing, has become an increasing amount of popular lately, and the number of materials and methods that can be used is expanding. As manufacturing processes continue to improve and evolve, the demand for faster, less expensive manufacturing processes has enabled a range of Rapid Prototyping (RP) processes to be developed. Since production processes continue to evolve and grow, the demand for faster and less expensive production processes has allowed the development of a series of processes of rapid prototyping (RP). With additive manufacturing, virtually any geometry with variations in size and complexity can be produced with a high degree of accuracy. The typical microstructure of the metal after the completion of the construction process is the dispersed dendritic and cellular structures of the γ-phase within the melt baths of single tracks, because of the overlap of which a part is created layer by layer. The main problems of ensuring high-quality products using SLM technology are porosity, hot cracking, anisotropy, surface roughness, and ensuring the necessary microstructure of the synthesized material. Improvement of surface roughness, the brilliance of stainless steel surface elements after electrochemical polishing (EP) is one of the most important characteristics of the process. Samples were made using the SLM technology from austenitic steel powder AISI 316L with a controlled defect in the form of local overheating, because of which an orange variability is formed, which is formed during 3-D printing. The samples are inversely symmetrical, have an equilateral trapezoid shape with bases of 20 and 5 mm, a height of 10 mm, and a thickness of 5 mm. The main body of both samples was printed in the same modes at a power of 220 W, a speed of 1000 mm / s, and a track spacing of 0,14 mm. To form a controlled defect when printing the boundaries of the samples, the following modes were used: power 120 W, speed 1050 mm / s, and distance between tracks 0,02 mm. The samples were printed in an Alfa-280 3D printer manufactured by ALT Ukraine. Etching to reveal the microstructure of the samples was conducted using an HCl + HNO3 solution. Electropolishing was conducted in a solution of orthophosphoric acid (H3PO4) with glycerol (C3H8O3) at a current density of 3 A / cm2. Metallographic studies have shown that the configuration of the tracks in the area of increasing the cross-section of the samples is more uniform. Based on this study, schemes for distributing zones with varying degrees of track equiaxiality and structure uniformity were constructed. A more intense interaction of the reagent with the microstructure near the surface with greater roughness was found. The electropolishing of isosceles trapezoids occurred in three stages: 1) visual - optical examination with fixation, control of roughness, weight, and geometry before starting the process; 2) control of roughness and geometry after 3 min. process; 3) visual - optical examination with fixation, control of roughness, weight, and geometry after 6 min electropolishing. From the analysis of the obtained roughness data and the real volt-ampere curve, it was found that zone 2 with the largest area had an insignificant change in roughness, zone 1 and zone 3 with a decrease in the area had a more significant loss on average by 33%. Controlling the weight before and after the test showed that the samples lost approximately the same weight of about 1,5%. Based on the ratio of the results obtained, it was found that when a fixed current strength and constant power are applied, electropolishing is not effective for active uniform anodization of the surface of a simple figure with a change in the area in the section. It was found that electropolishing most intensively occurs in an area with a smaller cross-sectional area.

1 January 2020 in Fundamental and applied problems of ferrous metallurgy
Verified
Journal Article
Closed access
ABA.I. Babachenko
A.I. Babachenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
GKG.A. Kononenko
G.A. Kononenko
ЕSЕ.а. Safronova
Е.а. Safronova
The safety of railway transport depends on the quality of the metal, the efficiency of the technology for manufacturing rails and wheelsets, and the operating conditions of the railway track. The operational durability of rails is largely determined by the structural state and mechanical properties of the metal of the rail elements. On the basis of a comparative analysis of various methods and modes of treatment of railway rails, it was found that one of the ways to increase the operational reliability of rails can be the optimization of methods for heating and cooling the metal when implementing the modes of their heat treatment. A study of the microstructure of steel laboratory melts up to 10 kg, melted under the conditions of the IHM NASU (the symbol of which is PCT), after furnace heating with cooling the blanks for tensile specimens (55x12x12mm) in various cooling media: in calm air, under a ventilator, blowing with compressor air in water with a temperature of 80˚С. It is found that at cooling rate 5,1˚С / s (cooling air compressor) is obtained a homogeneous structure of fine pearlite with a hardness of the metal at the level of foreign standards. On the basis of technical sources, it has been established that volumetric furnace heating followed by immersion of the test specimens made of steel with 0,84%С, 0,44% Si, 0,95% Mn into an environment providing the metal with a controlled cooling rate of ≈5.1˚C / s contributes to the formation of a lamellar pearlite structure with a hardness of 415 HB. It was found that the use of furnace heating leads to the production of homogeneous austenite in the volume of the samples under study.