Rostyslav Podolskyi

Mr. Rostyslav Podolskyi

Iron and Steel Institute of Z.I.Nekrasov National Academy of Sciences of Ukraine, Dnipro, Dnipropetrovs’ka Oblast’, Ukraine
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022
Verified
Book
Closed access
LULLC «Additive Laser Technology of Ukraine»
LLC «Additive Laser Technology of Ukraine»
SASergey Adjamskiy
Sergey Adjamskiy
GKGanna Kononenko
Ganna Kononenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
SBSergey Badyuk
Sergey Badyuk
Additive technologies make it possible to provide high quality products (accuracy and uniqueness of geometry, high complex of mechanical properties, high density (low porosity), uniformity of microstructure and chemical composition). A wide range of materials used allows it to find application in such industries as medical and dental, engineering, automotive and aerospace. At present, technological capabilities, the development of laser technologies and CAD modeling systems have made it possible to develop devices for building parts by loading the original CAD model and fusing metal powder using a laser in accordance with it – what is today called SLM technology. During this process, the metal powder is completely melted under the influence of high-power laser radiation with the formation of a metal layer that contains almost no pores and does not require further processing, which makes it possible to achieve a level of mechanical properties of the product equal to or even better than those of cast ones. To create advanced equipment and professional control of the process of manufacturing parts, a deep understanding of the processes occurring in the melt pool under the laser beam and after hardening is necessary. At the same time, the final quality of products manufactured using SLM technology depends on many factors that can be divided into main groups: equipment (calibration, laser power, energy distribution in the beam, powder application system, shielding gas supply, distribution and purification system, system ensuring the tightness of the chamber, etc.), material (sphericity, dispersion, bulk density, fluidity, properties, handling, etc. of metal powder), process parameters, geometry features of the part, finishing. Prospects for the development of technology in Ukraine are associated with the development of new structural materials, solving topology optimization problems, prototyping, studying the properties of materials and creating the latest production solutions in the field of additive technologies.

1 January 2021 in Science and innovation
Verified
Journal Article
Closed access
PDF file
OBOleksandr Babachenko
Oleksandr Babachenko
ГКГанна Кононенко
Ганна Кононенко
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
Introduction. The conditions of operation of the railways of Ukraine and the prospects for their entry into the international system of transport corridors require the development and modernization of railway tracks, including rails. Problem Statement. Given the necessity to ensure the main operational parameter of the rails (wear resistance), regulatory and technical documents standardize hardness. The most progressive European standard EN 13674-1-2011 establishes that the hardness of the rail head at a depth of 20 mm shall be, at least, 321 HB, while DSTU 4344:2004 requires, at least, 321 HB at a depth of 11 mm. At the same time, according to EN 13674-1-2011, the rail surface hardness without the formation of needle structures shall be, at least, 405 HB. Purpose. To determine the possibility of achieving hardness without needle structures for rail head made of steel 0,80% C, 0,25% Si, 0,97% Mn, 0,055% V (hereinafter referred to as K76F), which complies with the world requirements, based on the calcination experiment and calculations with the use of the model; to determine the rational cooling rate for K76F steel during heat treatment. Materials and Methods. K76F rail steel with 0.80% C, 0.25% Si, 0.97% Mn, 0.055% V. Techniques: metallographic studies, hardness measurements, determination of calcination by end quenching, modeling by means of mathematical calculation with the use of QForm heat treatment software package. Results. The change in temperature, the formation of structure and hardness across the section of a K76F steel sample for calcination tests according to GOST5657 has been modeled. The changes in the hardness and microstructure has been experimentally established, depending on the distance to the heat sink surface; the cooling rate in the points where the hardness meets the requirements of EN 13674-1-2011 for rails has been determined. Conclusions. The analysis of the model has shown a high accuracy of the model and the convergence of the experimental results with the calculated ones. It has been established that the requirements of EN 13674-1-2011 can be achieved up to a hardness of 405 HB without the formation of needle structures on steel that meets the chemical composition of K76F according to DSTU 4344: 2004.

28 February 2024 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
OMOleksii Merkulov
Oleksii Merkulov
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
AKAnna Kononenko
Anna Kononenko
ESElena Safronova
Elena Safronova
EKEugen Klemeshov
Eugen Klemeshov

1 November 2023 in Powder Metallurgy and Metal Ceramics
Verified
Journal Article
Closed access
PDF file
SAS. V. Adjamsky
S. V. Adjamsky
GKG. A. Kononenko
G. A. Kononenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
OSO. A. Safronova
O. A. Safronova
OSO. A. Shpak
O. A. Shpak

1 December 2023 in Materials Science
Verified
Journal Article
Closed access
PDF file
SAS. V. Adzhamskyi
S. V. Adzhamskyi
GKG. A. Kononenko
G. A. Kononenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi

1 January 2020 in Scientific journal of the Ternopil national technical university
Verified
Journal Article
Open access
SAS. Adjamskiy
S. Adjamskiy
GKG. Kononenko
G. Kononenko
Rostyslav PodolskyiRostyslav Podolskyi
Rostyslav Podolskyi
Additive manufacturing is a promising modern direction that allows quickly and with high accuracy layer-by-layer manufacture of complex-shaped products using a computer model from almost any metal powders. This work is devoted to the study of the influence of specimen orientation during 3-D printing and heat treatment modes on the mechanical properties of specimens made of Inconel 718 heat-resistant nickel alloy manufactured using SLM technology. In the study of the position of the specimen during printing, it was found that the strength indicators are slightly higher for vertical specimens (up to 9%), and the plasticity is lower on average by 20%. After standard heat treatment, which consists of two stages (quenching and aging) with cooling in quiet air, the strength values of vertically and horizontally constructed specimens are very close (the difference is up to 3%).The plasticity values for the horizontal position of the specimen when printing are 10% and 30% higher. According to macrogeometry, the specimens under study have cup fracture; according to microfractors, it was established that the fracture mechanism is viscous and quasi-brittle. In the initial state, which is formed by 3-D printing, there were signs of viscous fracture: the crack propagates mainly by separating the metal in planes that do not coincide with the crystallographic planes of the sections, mainly the fracture surface in the form of pits - microdepressions on the fracture surface. representing the exposed surfaces of the microvoids formed during the plastic flow of the metal. In the study of the metal of the test specimens in the polished state, it was found that specimens No. 1-5 had high integrity (low porosity), a small amount of oxide inclusions was observed. The study found that the presence of defects in the form of micropores did not lead to a significant reduction in the mechanical properties of the test samples.