The principles of the friction welding (FW) process of the two different non-ferrous metals, aluminum and copper, are presented in this paper. Considering that the bimetallic Al-Cu joints find applications in electrical engineering, as well as in other industrial fields, the basic characteristics and compatibility of these metals are discussed, along with the influence of various parameters on the properties of their friction welded joints. The experimental study involved rotation friction welding (RFW), which was used to weld aluminum and copper samples. The samples were monitored for shortening due to the applied deformation, as well as the size of the formed mushroom. Then, the central part of the welded joint was cut from the welded samples to determine the hardness and microstructure of the joint. At the end of the research, the possibility of applying software for the design of a numerical model for analysis of the possibility of joining aluminum and copper, with the same input parameters as those used in the experiment, was considered. The numerical simulation exhibited a high agreement with the experimental results.
In this paper, the research results of the stability of steel welded tubes forming process are presented. The aim of this research is to determine influence of geometrical and tribological parameters on stability of the process and to...
Additive manufacturing of polymer tools represents a promising alternative to conventional steel tooling for low-force and low-volume sheet metal air bending. However, accurate prediction of sheet springback and the resulting deviation of the bending angle after elastic unloading remains a major challenge. This study presents an integrated experimental–numerical framework for the analysis of air bending with additively manufactured polymer tools, with emphasis on material characterization, springback prediction, and tool angle compensation. The methodology combines uniaxial tensile testing, controlled air-bending experiments, finite element modelling with rigid and deformable tools, and optical 3D scanning for angle measurement. Low-carbon steel DC04 sheets were modeled using an elastoplastic constitutive law, while additively manufactured ABS tools were described by experimentally calibrated material models. Numerical simulations were performed over a range of forming forces to evaluate springback behavior and elastic tool deformation. The results show very good agreement between experiments and simulations. Deviations in bending angle were below 1.5% for metallic tools and below 0.5% for springback compensation, with the smallest discrepancy obtained using a two-dimensional model with deformable tools. Experimental validation with ABS tools confirmed bending accuracy within ±1°. The proposed framework provides a reliable basis for springback prediction and rational design of additively manufactured polymer tools for air-bending applications.
The increasing demand for lightweight and reliable structural components and tools in manufacturing engineering creates a need for accurate data regarding the fatigue performance of high-strength and tool steels. This paper presents an experimental and comparative investigation of the fatigue behavior of STRENX 700, a high-strength structural steel, and 55NiCrMoV7, a thermally stable hot-work tool steel. Fatigue tests were conducted using a stress-controlled, fully reversed tension-compression loading regime (R = –1) on smooth “dog-bone” specimens. The resulting S–N curves were used to evaluate fatigue strength and determine the material parameters using Basquin’s relation. The results provide insight into the fatigue properties of these steels that have different industrial applications but are tested under the same conditions. The fatigue performance, advantages, and trade-offs of each steel grade are discussed.
15 April 2024 in Tehnicki vjesnik - Technical Gazette
The purpose of this paper is to determine the temperature fields in the workpiece and the tool in the ironing process using an integrated approach that includes laboratory experiments and numerical modelling. An originally developed model device for...