Jorge Lopez Herrera

Dr. Jorge Lopez Herrera


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2023 in Foods
Verified
Journal Article
Open access
PDF file
Wilber VilcapomaWilber Vilcapoma
Wilber Vilcapoma
JBJohannes De Bruijn
Johannes De Bruijn
CECARLOS ELIAS-PEÑAFIEL
CARLOS ELIAS-PEÑAFIEL
CSCLARA RAQUEL ESPINOZA SILVA
CLARA RAQUEL ESPINOZA SILVA
LRLucero Farfán Rodríguez
Lucero Farfán Rodríguez
Christian R. Encina-ZeladaChristian R. Encina-Zelada
Christian R. Encina-Zelada
The main objective of this study was to optimize the extraction of dietary fiber (insoluble dietary fiber and soluble dietary fiber) and degree of esterification from yellow dragon fruit peels using ultrasound-assisted extraction. Additionally, the study aimed to investigate the potential application of this fiber as a fat replacement in alpaca-based sausages. The optimization process for extracting dietary fiber and degree of esterification involved considering various factors, including the liquid-to-solid ratio, pause time, and total ultrasound application time. A Box–Behnken design consisting of 15 treatments was employed to determine the optimal levels for ultrasound-assisted extraction. The optimized conditions were found to be a liquid-to-solid ratio = 30 mL/g, pause time = 1 s, and total ultrasound application time = 60 min, which resulted in the highest values of insoluble dietary fiber (61.3%), soluble dietary fiber (10.8%), and the lowest value of degree of esterification (39.7%). The predicted values were validated against experimental data and showed no significant differences (p > 0.05). Furthermore, a completely randomized design was utilized to assess the effect of dietary fiber on replacing fat content during the production of alpaca-based sausages. The findings revealed that up to 78% of the fat content could be successfully replaced by soluble dietary fiber obtained from yellow dragon fruit peels when compared to high-fat sausages. Additionally, experimental sausages using soluble dietary fiber showed similar (p > 0.05) quality characteristics, such as hardness (24.2 N), chewiness (11.8 N), springiness (0.900), cohesiveness (0.543), redness (a* = 17.4), and chroma values (20.0), as low-fat commercial sausages.

14 February 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Juan Taumaturgo Medina-CollanaJuan Taumaturgo Medina-Collana
Juan Taumaturgo Medina-Collana
WSWilfredo David Sejje Suárez
Wilfredo David Sejje Suárez
NCNoemí Anyosa Cáceres
Noemí Anyosa Cáceres
LCLuis Américo Carrasco-Venegas
Luis Américo Carrasco-Venegas
PBPablo Belizario Diaz Bravo
Pablo Belizario Diaz Bravo
JVJacob Astocondor Villar
Jacob Astocondor Villar
In the present study, a calcium alginate bead adsorbent was prepared from brown algae (Macrosystis pyrifera) and was used for removal of Pb+2, Cu+2, and Sb+3 ions from aqueous solutions, using a fixed bed column. The initial concentration of metal ions, mass of adsorbent, recirculation flow, hydrodynamic cavitation, and contact time were examined, and the adsorption kinetics and isotherms were systematically studied. The Taguchi five-factor methodology was used for the development at three levels of experimentation. Experiment N° 24 (concentration, 10 mg/L; flow rate, 10 mL/s; adsorbent mass, 10 g; hydrodynamic cavitation with maximum air flow, and treatment time 240 min) resulted in the maximum removal of 92%, 78%, and 16% of lead, copper, and antimony ions, respectively. The average rate constants corresponding to pseudo-second-order kinetics for lead, copper, and antimony ions were 5.3 × 10−3, 1.4 × 10−3, and 7 × 10−5 g.mg−1min−1, respectively. In the adsorption process, they closely approximate to Langmuir and Freundlich isotherms, with adsorption capacities for Pb2+, Cu2+, and Sb3+ of 7.60, 2.07, and 0.37 mg/g, respectively, with good bioadsorption affinity of Pb > Cu > Sb. It was demonstrated that the bioadsorption equipment, with proper control of the factors, achieves concentration values of lead and copper ions below the current environmental regulations. The results of these studies indicated that calcium alginate is a promising adsorbent for separating and recovering heavy metal ions from contaminated water, although further research is needed for antimony ions.

13 June 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Juan Taumaturgo Medina-CollanaJuan Taumaturgo Medina-Collana
Juan Taumaturgo Medina-Collana
KAKevin Remigio Azorza
Kevin Remigio Azorza
EMEdgar Williams Villanueva Martinez
Edgar Williams Villanueva Martinez
CDCarlos Alejandro Ancieta Dextre
Carlos Alejandro Ancieta Dextre
LCLuis Américo Carrasco-Venegas
Luis Américo Carrasco-Venegas
JMJorge Alberto Montaño-Pisfil
Jorge Alberto Montaño-Pisfil
Given the problems related to drinking water supplies in rural and economically disadvantaged regions, point-of-use disinfection technologies are a viable alternative to improve access to drinking. Electrochlorinators are devices that produce chlorine-based disinfectants onsite via the electrolysis of a sodium chloride solution. In this research, we have constructed an innovative laboratory-scale three-compartment cell that includes two ion exchange membranes, fixed between two electrodes; in the anodic compartment, an acidic mixture of chlorine-based species (Cl2, HClO, HCl and ClO−) is obtained, and, in the cathodic compartment, an alkaline solution is present (NaOH and hydrogen gas), while the central compartment is fed with a sodium chloride solution. The Taguchi methodology was used to examine the impact of the process operating conditions on the results obtained. The effects of the electrical potential levels (4.5, 6 and 7 V), electrolysis times (30, 60 and 90 min) and initial sodium chloride concentrations (5, 15 and 30 g/L) on the physical and chemical characteristics (concentrations of available chlorine and sodium hydroxide and pH of the solutions) and energy consumption were investigated. Variations in the electrical potential significantly influenced the concentration levels of active chlorine and sodium hydroxide produced, as well as the pH values of the respective solutions. The most favorable conditions for the production of electrolyzed water were an electrical potential of 7 volts, an electrolysis time of 90 min and a concentration of 30 g/L of sodium chloride, which was verified by ANOVA. The maximum concentration of active chlorine reached 290 mg/L and that of sodium hydroxide reached 1450 mg/L without the presence of hypochlorite ions under the best synthesis conditions. The energy consumption was 18.6 kWh/kg Cl2 and 4.4 kWh/kg NaOH, while the average electric current efficiency for sodium hydroxide formation reached 88.9%. Similarly, the maximum conversion of chloride ions reached 24.37% under the best operating conditions.

6 March 2026 in Reactions
Verified
Journal Article
Open access
PDF file
LMLuz Andia Andia Marron
Luz Andia Andia Marron
JAJessica Abad-Salcca
Jessica Abad-Salcca
Juan Taumaturgo Medina-CollanaJuan Taumaturgo Medina-Collana
Juan Taumaturgo Medina-Collana
EMEdgar Williams Villanueva Martinez
Edgar Williams Villanueva Martinez
JHJorge Lopez Herrera
Jorge Lopez Herrera
SVSegundo Alberto Vásquez-Llanos
Segundo Alberto Vásquez-Llanos
Hydrodynamic cavitation (HC) is an efficient technique for biodiesel production. The main contribution of this study is the development of a modular reactor with a universal stainless steel joint, whose design facilitates the installation, replacement, and maintenance of the orifice plate by eliminating flanges and bolts during assembly. Using this reactor, the study evaluated the synergistic interaction between feed pressure and methanol:oil molar ratio in the transesterification of soybean oil, employing a 32 factorial design. The orifice plate was 3 mm thick and had 19 holes with a diameter of 1.0 mm, installed downstream of the pump. The process was carried out for 45 min, using NaOH at 1 wt% relative to the oil and at 60 ± 5 °C. Feed pressures of 1.72, 2.41, and 3.10 bar and methanol:oil molar ratios of 6:1, 8:1, and 10:1 were evaluated, reaching a maximum yield of 92.98% at 3.10 bar and 8:1. Analysis of variance (ANOVA) confirmed a significant interaction (p < 0.0001) and allowed a second-order polynomial model to be fitted (R2 = 0.9981). In contrast, conventional mechanical agitation required 90 min to achieve 95% yield. The biodiesel produced met most American Society for Testing and Materials (ASTM) D6751 requirements, confirming the potential of HC as a viable alternative for intensifying biodiesel production.

1 January 2025
Verified
Conference Paper
Open access
PDF file
SMSakibaru Mauricio
Sakibaru Mauricio
LALuis Alberto
Luis Alberto
PNPuchuri Navarrete
Puchuri Navarrete
MAMarco Antonio
Marco Antonio
BRBazan Robles
Bazan Robles
RDRuben Dario
Ruben Dario
The research entitled "Quality Management System based on ISO 9001:2015 to improve customer satisfaction of the company INVERSIONES PUCHURI HNOS. S.A.C, Lima 2024" had the purpose of evaluating the impact of a QMS on customer satisfaction. Through a quantitative approach, experimental design and explanatory level, 25 clients were worked with using tools such as checklists, process diagrams (DOP) and activities (DAP). The results reflected an increase in customer satisfaction from 70.5 % to 93.37 %, accompanied by improvements in customer service (20.54 %), on-time deliveries (23.42 %) and product quality (30.67 %). It is concluded that the QMS based on ISO 9001:2015 is highly effective in optimizing customer satisfaction. The company is recommended to prioritize continuous improvement, train staff, monitor deliveries and conduct periodic audits to maintain the results obtained.

1 January 2025
Verified
Conference Paper
Open access
PDF file
RNRuiz Nizama
Ruiz Nizama
JLJosé Leonor
José Leonor
SMSakibaru Mauricio
Sakibaru Mauricio
LALuis Alberto
Luis Alberto
MCMorales Chalco
Morales Chalco
KJKatja Janeth
Katja Janeth
Supply chain management in restaurants is essential to their success. It involves several key areas, such as purchasing food and supplies, selecting reliable suppliers, and negotiating contracts to obtain quality products at competitive prices. In addition, it is essential to maintain good relationships with suppliers, manage deliveries to ensure freshness and punctuality, and control inventory levels to avoid financial losses. Cost monitoring and storage efficiency are also crucial to profitability. Finally, ensuring timely and quality delivery to the customer is essential for customer satisfaction. Effective supply chain management not only optimizes the restaurant operation, but also improves the customer experience and contributes to the overall success of the business.