The most common method used to pick up biomedical signals is through metallic electrodes coupled to the input of high-gain, low-noise amplifiers. Unfortunately, electrodes, amongst other effects, introduce an undesired contact resistance and a contact potential. The contact potential needs to be rejected since it would otherwise cause the saturation of the input stage of the amplifiers, and this is almost always obtained by inserting a simple RC high-pass filter in the input signal path. The contact resistance needs to be estimated to ensure that it does not impair correct measurements. Methods exist for estimating the contact resistance by dynamically modifying the input network configuration, but because of the presence of the input RC filter, long transients are induced any time a switch occurs between different input configurations, so that the measurement time may become unacceptably long. In this paper, we propose a new topology for a DC removal network at the input of the differential signal amplifier that results in an AC filter whose time constant can be continuously changed by means of a control voltage. As such, we can speed up the recovery from transients by setting very short time constants (during the input resistance estimation process) while maintaining the ability to obtain very low cut-in frequencies by setting a much larger time constant during actual measurements. A prototype of the system was built and tested in order to demonstrate the advantage of the approach we propose in terms of reduced measurement time.

The human neck is highly vulnerable in motor vehicle crashes, and cervical spine response data are essential to improve injury prediction tools (e.g., crash test dummies, human body models). This feasibility study aimed to implement the use of pressure sensors in whole-body post-mortem human subject (PMHS) cervical spine intervertebral discs (IVDs) to confirm the feasibility and repeatability of cervical IVD pressure response to biomechanic research. Two fresh frozen whole-body PMHSs were instrumented with miniature pressure sensors (Model 060S, Precision Measurement Company, Ann Arbor, MI, USA) at three cervical IVD levels (C3/C4, C5/C6, and C7/T1) using minimally invasive surgical insertion techniques. Each PMHS underwent three quasistatic motion test trials, and each trial included multiple head/neck motions (i.e., gentle traction, flexion/extension, lateral bending, axial rotation, and forced tension/compression). Results showed marked pressure differences between both the cervical level assessed and the motion undertaken as well as successful intra-subject repeatability between the three motion trials. This study demonstrates that changes in cervical IVD pressure are associated with motion events of the cervical spine. Cervical IVD response data could be utilized to assess and supplement the characterization of the head/neck complex motion, and data could facilitate the continued improvement of injury prediction tools.

This study suggests using wearable activity trackers to identify mobility patterns in chronic complex patients (CCPs) and investigate their relation with the Barthel index (BI) to assess functional decline. CCPs are individuals who suffer from multiple, chronic health conditions that often lead to a progressive decline in their functional capacity. As a result, CCPs frequently require the use of healthcare and social resources, placing a significant burden on the healthcare system. Evaluating mobility patterns is critical for determining a CCP’s functional capacity and prognosis. To monitor the overall activity levels of CCPs, wearable activity trackers have been proposed. Utilizing the data gathered by the wearables, time series clustering with dynamic time warping (DTW) is employed to generate synchronized mobility patterns of the mean activity and coefficient of variation profiles. The research has revealed distinct patterns in individuals’ walking habits, including the time of day they walk, whether they walk continuously or intermittently, and their relation to BI. These findings could significantly enhance CCPs’ quality of care by providing a valuable tool for personalizing treatment and care plans.

Intraoperative Neurophysiological Monitoring is a set of monitoring techniques that reads electrical activity generated by the nervous system structures during surgeries. In non-trivial surgeries, neurophysiologists require a significant number of electrical signals to be picked up to check the effects of the surgeon’s actions in real time or to confirm that the correct nerves are selected. As a result, cabling the patient in the operating room can become cumbersome. The proposed WIONM module solves part of the problem by converting a good part of those cables into a wireless connection that is substantially transparent to the human operator and the existing medical instrumentation.

Cervical spine (c-spine) injuries are a prominent concern in sporting activities, and dynamic axial (i.e., head-first) impacts are associated with a high risk of c-spine trauma. This methodology study implanted pressure sensors in post-mortem human subject (PMHS) cervical intervertebral discs (CIVDs) to assess biomechanical response and disc pressure changes during dynamic injurious axial impacts. Two fresh frozen male head–neck PMHS (cephalus with complete c-spine) were instrumented with miniature pressure sensors (Model 060S, Precision Measurement Company, Ann Arbor, MI, USA) at three CIVD levels (upper, middle, and lower c-spine). Experiments replicated the Nightingale et al. studies, simulating a rigid unconstrained head vertex (0°) axial impact. PMHS were raised to a drop height of 0.53 m to reach the desired impact velocity of ~3.2 m/s and were allowed to drop vertically. Results showed characteristic c-spine deformations/buckling motion patterns and marked CIVD pressure differences between CIVD levels. The more cranial (C2–C4) and caudal (C6–T1) CIVD exhibited greater and more comparable pressure values than those of the mid-spine (C4–C6), and the pressure in upper/lower levels was at least ~four to six times higher than that of the middle. This study establishes the feasibility and assesses the potential of CIVD pressure as a biomechanical metric for assessing injurious axial loading and contributes a novel experimental framework for future injury tolerance research and model validation.