Gulnaziya A. Seitbekova

Dr. Gulnaziya A. Seitbekova


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
BKBakytgul Kussainova
Bakytgul Kussainova
GTGaukhar Tazhkenova
Gaukhar Tazhkenova
IKIvan Kazarinov
Ivan Kazarinov
ANAisha Nurlybayeva
Aisha Nurlybayeva
ALAnna Lamichova
Anna Lamichova
RKRabiga Musaparovna Kudaibergenova
Rabiga Musaparovna Kudaibergenova
A comparative study of the physicochemical properties of natural bentonite clays of Pogodayevo (Republic of Kazakhstan, mod. 1) and Dash-Salakhli (Republic of Azerbaijan, mod. 2) deposits and modification of the bentonite clay with polyhydroxocations of iron (III) and aluminium (III). The amount of bentonite in the concentration of iron (aluminum) was 5 mmol Me3+/g. It was established that the modification of natural bentonites using polyhydroxocations of iron (III) (mod. 1_Fe_5-c, mod. 2_Fe_5-c) and aluminum (III) (mod. 1_Al_5-c, mod. 2_Al_5-c) by the method of “co-precipitation” leads to a change in their chemical composition, structural and sorption properties. The results showed that hydroxy-aluminum cations ([Al3O4(OH)24(H2O)12]7+) and poly-hydroxyl-Fe or polyoxo-Fe were intercalated into clay layers, which led to an increase in the values of d001 and specific surface areas compared to those of the original bentonite, from 37 to 120 m2/g for the Pogodaevo bentonite and from 51 to 172 m2/g respectively, for bentonite from the Dash-Salakhli deposit. It is shown that modified sorbents based on natural bentonite are finely porous objects with a predominance of pores of 1.5–8.0 nm in size. As a result, there is a significant increase in the specific surface area of sorbents. Modification of bentonite with polyhydroxocations of iron (III) and aluminum (III) by the “co-precipitation” method also leads to an increase in the sorption capacity of the sorbents obtained with respect to nickel (II) cations. Modified bentonites were used for the adsorption of Ni (II) ions from the model solution. Ni (II) was absorbed in a neutral pH solution. The study of equilibrium adsorption showed that the data are in good agreement with the Langmuir isotherm model. The maximum adsorption capacity of the Ni (II) obtained from the Langmuir equation was 25.0 mg/g (mod. 1_Al_5-c), 18.2 mg/g (mod. 2_Al_5-c) for Al-bentonite and 16.7 mg/g (mod. 1_Fe_5-c), 10.1 (mod. 2_Fe_5-c) for Fe-bentonite. The kinetics of adsorption is considered. The high content of Al-OH anion exchange centers in them determines the higher sorption activity of Al-modified bentonites.

5 August 2024 in Molecules
Verified
Journal Article
Open access
PDF file
BKBakytgul Kussainova
Bakytgul Kussainova
GTGaukhar Tazhkenova
Gaukhar Tazhkenova
IKIvan Kazarinov
Ivan Kazarinov
MBMarina Burashnikova
Marina Burashnikova
ANAisha Nurlybayeva
Aisha Nurlybayeva
ABAidana Bazarkhankyzy
Aidana Bazarkhankyzy
The physicochemical properties of natural bentonite and its sorbents were studied. It has been established the modification of natural bentonites using polyhydroxoxides of iron (III) (mod.1_Fe_5-c) and aluminum (III) (mod.1_Al_5-c) by the “co-precipitation” method led to changes in their chemical composition, structure, and sorption properties. It was shown that modified sorbents based on natural bentonite are finely porous (nanostructured) objects with a predominance of pores of 1.5–8.0 nm in size. The modification of bentonite with iron (III) and aluminum compounds by the “co-precipitation” method also leads to an increase in the sorption capacity of the obtained sorbents with respect to bichromate and arsenate anions. A kinetic analysis showed that, at the initial stage, the sorption process was controlled by an external diffusion factor, that is, the diffusion of the sorbent from the solution to the liquid film on the surface of the sorbent. The sorption process then began to proceed in a mixed diffusion mode when it limited both the external diffusion factor and the intra-diffusion factor (diffusion of the sorbent to the active centers through the system of pores and capillaries). To clarify the contribution of the chemical stage to the rate of adsorption of bichromate and arsenate anions by the sorbents under study, kinetic curves were processed using equations of chemical kinetics (pseudo-first-order, pseudo-second-order, and Elovich models). It was found that the adsorption of the studied anions by the modified sorbents based on natural bentonite was best described by a pseudo-second-order kinetic model. The high value of the correlation coefficient for the Elovich model (R2 > 0.9) allows us to conclude that there are structural disorders in the porous system of the studied sorbents, and their surfaces can be considered heterogeneous. Considering that heterogeneous processes occur on the surface of the sorbent, it is natural that all surface properties (structure, chemical composition of the surface layer, etc.) play an important role in anion adsorption.

17 November 2025 in Polymers
Verified
Journal Article
Open access
PDF file
ANAisha Nurlybayeva
Aisha Nurlybayeva
ZUZhansaya Urkimbayeva
Zhansaya Urkimbayeva
RRRaikhan Rakhmetullayeva
Raikhan Rakhmetullayeva
RTRaushan Taubayeva
Raushan Taubayeva
NSNurbanu Sarova
Nurbanu Sarova
RERustem Ergali
Rustem Ergali
This study reports the solvent-free synthesis, structural characterization, and performance evaluation of poly (methyl methacrylate-co-acrylic acid) [P(MMA-AA)] copolymers intended for use as sustainable concrete primers and industrial coatings. A series of copolymers with varying MMA-AA molar ratios were synthesized via bulk radical polymerization and characterized using 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The resulting materials were evaluated for their physical mechanical properties, including viscosity, tensile strength, surface hardness, and wettability. The findings revealed that higher MMA content improved the thermal stability, tensile strength, and hardness of the coatings, whereas increasing the AA content enhanced crosslinking density, hydrophilicity, and chemical resistance. These results demonstrate the potential of solvent-free P(MMA-AA) copolymers as environmentally friendly, high-performance alternatives to conventional solvent-based systems in protective coating applications.

11 June 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
GJGulim Jetpisbayeva
Gulim Jetpisbayeva
NSNurbanu Sarova
Nurbanu Sarova
GSGulnaziya A. Seitbekova
Gulnaziya A. Seitbekova
The selective conversion of syngas (CO + H2) to higher alcohols (C2+OH) via Fischer–Tropsch synthesis (FTS) is a strategically important but challenging process, requiring catalysts that can simultaneously sustain C–C chain growth and preserve C–O bonds in reactive intermediates. Over the past decade (2015–2025), perovskite-type complex oxides with the formula ABO3 have emerged as powerful precatalysts for this application, with LaCoO3 attracting particular attention due to its structural flexibility, controllable reducibility, and the unique catalytic role of the La2O3 phase formed upon reduction. This review systematically covers recent advances in synthesis strategies for LaCoO3 and substituted perovskites, including sol–gel, co-precipitation, mechanochemical, and template-assisted (KIT-6, SBA-15) methods; effects of A-site (Sr) and B-site (Cu, Ga, Ni, Mn) substitution on reducibility, active phase dispersion, and product selectivity; alkali promotion and its interaction with the perovskite-derived active phase; mechanistic understanding of the alcohol-forming pathway, including the Co0/Co3+ bifunctional site concept, CO insertion mechanism, and the role of La2O3 in suppressing the Boudouard reaction; and catalyst stability and deactivation pathways under FTS conditions. Original data from LaCoO3 catalysts prepared by co-precipitation with ethylene glycol (LCO-1: S_KOH = 90%, Y_KOH = 57 mg·g−1·h−1) and via citrate/KIT-6 template synthesis (LCO/KIT-6: Y_KOH = 80 mg·g−1·h−1, S_BET = 220 m2/g) at 240 °C and 2 MPa serve as the primary experimental reference throughout. Key challenges, including the surface area–selectivity trade-off, long-term stability under industrial conditions, and opportunities in CO2 hydrogenation, are critically discussed.

15 April 2020 in SERIES CHEMISTRY AND TECHNOLOGY
Verified
Journal Article
Closed access
ANAisha Nurlybayeva
Aisha Nurlybayeva
ERE.I. Rustem
E.I. Rustem
HSH.R. Sadiyevа
H.R. Sadiyevа
GSGulnaziya A. Seitbekova
Gulnaziya A. Seitbekova
ADAkmaral Darmenbayeva
Akmaral Darmenbayeva
UOU.T. Otinshieva
U.T. Otinshieva
Copolymerizations of unsaturated compounds with different ratios of acrylic monomers were synthesized. The synthesized copolymers exhibit good adhesion, flexibility and waterproofing performance may be used in the paint industry. The behavior of the copolymers of MMA and BuMA and proven by IR spectroscopy. This paper describes the synthesis, structure and properties of certain block copolymers. The practical application of scanning electron microscopy used for investigation of materials. Keywords: methyl methacrylate, butyl methacrylate, copolymers, paint, films, tensile strength, elongation at break, shore hardness.

15 August 2020 in SERIES CHEMISTRY AND TECHNOLOGY
Verified
Journal Article
Open access
ANAisha Nurlybayeva
Aisha Nurlybayeva
RERustem Ergali
Rustem Ergali
SASholak Abdugali
Sholak Abdugali
GSGulnaziya A. Seitbekova
Gulnaziya A. Seitbekova
MKMarzhan Kalmakhanova
Marzhan Kalmakhanova
KDKulbaeva Dilbar
Kulbaeva Dilbar