Physical and mechanical properties of timber components are the basis of developing the technical measures for the conservation and restoration of historical timber structural buildings. By means of integrating on-site investigation (such as a visual survey, moisture content test, micro-drilling resistance test, and material samples collection of historical timber components) and laboratory tests, this study proposed a series of methodologies for comprehensively evaluating the physical and mechanical properties of timber. This method can be quickly mastered by various non-professionals and can help the cross-learning of various disciplines engaged in the research of architectural heritage protection. As a trial, the methodologies were applied to survey and assess a typical historical Chinese timber structural building named the Fujiu Zhou house (the house is located in No. 19, Qinglian lane, Yangzhou city, Jiangsu province, China). The paper studies the 224 components of the main structure of the building, including 128 columns and 96 beams. With the help of the components’ defects and damage status, GB/T13942.2-1992 and the National Lumber Grades Authority (NLGA), the grade of timber components was distinguished. The modulus of elasticity (MOE), modulus of rupture (MOR), and other related material properties parameters of timber components were also obtained. The trial results verify that the proposed methodologies are reasonable, and they can be helpful for the conservation of a historical timber structural building.
Vibration responses of building structure closely related to the structural health status. In this paper, wavelet singular spectrum entropy (WSSE) is proposed to evaluate the damage condition of building structure. A 1/3 scaled model of a Chinese ancient timber structure has been constructed, and three damage conditions and one restored condition of the structure are simulated. The acceleration responses for undamaged and the four simulated damaged and restored conditions are measured and analyzed by employing WSSE to identify the location at which the structure has incurred damage. Results show that (1) the relative variation rate of WSSE for the damaged position changes significantly; (2) the relative variation rate of WSSE of the point that is damaged more severely would become higher; and (3) signals of North-South and East-West directions are required for further identification. Moreover, a finite element modeling analysis of the timber structure under different damage conditions is performed, and the results verify the applicability of the method proposed.
How to examine and describe the defects in timber is vital for assessing the performance of an ancient timber structural building. This paper mainly elaborates the methodology of detecting the defects in ancient timber structures. The detection method includes preliminary condition survey, stress-wave tomography test, and correction with resistographic drilling. By means of above detection, the defects inside a timber structural building could be described more accurately.