Heavy metal toxicity in water is a serious problem that may have harmful effects on human health and the ecosystem. Lead [Pb(II)] and cadmium [Cd(II)] are two such heavy metal ions, present in water, whose severity is well-known and well-studied. In the current research, magnetic biochar composite (MBC) is studied as an adsorbent material for the effective removal of lead and cadmium ions from water solutions. Magnetite (Fe3O4) nanoparticles and pine-needle-derived ultrasonicated magnetic biochar were used in different weight ratios to prepare APTES (3-aminopropyl triethoxysilane)-functionalized MBC (FMBC). An average crystalline size of ~10 nm for magnetite NPs was obtained via XRD analysis. The adsorption characteristics of both Pb(II) and Cd(II) ions were investigated in a batch experiment. The FTIR spectra of raw biochar, MBC, FMBC, and metal-loaded FMBC were obtained at different stages. The decrease in the intensity of the –NH2 functional group in the FTIR spectra of the residue confirmed the successful adsorption of heavy metal ions. The SEM-EDX spectra of the residue showed the uniform adsorption of Pb(II) and Cd(II) heavy metal ions onto the surface of the adsorbent. Magnetic biochar composite (MBC) was found to be a very effective adsorbent at basic pH, as a maximum of 97% instantaneous heavy metal removal was observed for both ions in synthetic water solutions. The Langmuir isotherm model predicted the monolayer adsorption and good affinity between the metal ions and adsorbent. The prepared MBC is low-cost, environmentally friendly, and it has shown good adsorption performance. Therefore, our study suggests that the magnetic biochar composite under study is an effective adsorbent for lead and cadmium metal ion removal from aqueous solutions at normal room temperature. Only a few hundred milligrams of the adsorbent dose is sufficient to remove higher concentrations (~100 ppm) of lead and cadmium at basic pH conditions of aqueous solutions.
29 May 2025 in Journal of Trace Elements and Minerals
A successful attempt has been made to improve the mechanical properties of Hydroxyapatite (HAp) and reduced graphene oxide (rGO) composite nanoparticles (NPs). Various proportions of HAp and rGO were synthesized to improve the mechanical properties. HAp NPs were prepared using the wet precipitation method and further calcined to form crystalline particles. The physicochemical characterization of the HAp NPs revealed that the crystalline size and percentage of crystallinity were calculated to be 42.49 ± 1.2 nm and 44% post calcination. Furthermore, the rGO-HA composites were prepared using ball milling and obtained in the shape of pellets with different ratios of rGO (10, 20, 30, 40, 50% wt.). The mechanical properties have been evaluated through a Universal testing machine. Compared to calcined HAp (cHAp), the strength of variants significantly enhanced with the increased concentration of rGO. The compressive strength of HA-rGO with the ratio of the concentration of 60:40% by weight is a maximum of about 10.39 ± 0.43 MPa. However, the porosity has also been bolstered by increasing the concentration of rGO, which has been evaluated through the liquid displacement method. The mean surface roughness of the composites has also been evaluated from the images through Image J (an image analysis program).