Advanced manufacturing, precision metrology, space exploration, and other fields increasingly rely on multi-degree-of-freedom (multi-DOF) and high-precision measurements. The demands of such measurement systems—structural complexity, systematic error control, and information decoupling—have challenged traditional interferometric techniques. Wavefront interference imaging, which integrates laser interferometry with image analysis, has emerged as an advanced technique capable of subnanometer displacement and submicroradian angular resolution using a single laser beam. This method has gained importance in multi-DOF measurement technologies because it simultaneously obtains ultra-precise multi-DOF measurements with a compact setup, strong decoupling capability, and high integrability. This review systematically examines the development of wavefront interference imaging. Beginning with physical modeling of interference fringes, it traces the evolution of representative measurement models from two-dimensional to six-DOF configurations and analyzes the potential integration of this technique with emerging deep learning–based fringe processing methods. The paper further discusses frequency and phase decoupling algorithms in both the spatial and spectral domains and summarizes recent applications of this technology to nanometric coordinate measurements, atomic force microscopy, laser leveling, and spacecraft systems. The transition of wavefront interference imaging, from single-DOF extraction to coupled modeling and real-time resolution of multi-DOFs, demonstrates the excellent system scalability and application potential of this technology. This review aims to establish a theoretical framework and developmental roadmap for wavefront interference imaging, facilitating the advancement of high-precision, high-dimensional measurement systems in related domains.
22 September 2025 in IEEE Transactions on Instrumentation and Measurement
Homodyne wavefront interferometry enables synchronous compensation of angle error in precision displacement measurement. However, the traditional decoupling method relies on image signal, and the measurement speed is typically only some $\mu $ m/s. This article proposes a method that employs a fiber array for spatial sparse sampling, in order to achieve fast and simultaneous measurement of displacement, pitch, and yaw angles. A novel decoupling algorithm is developed to calculate the three degrees of freedom (3DoFs), based on an elliptic trajectory formed by a few sampling point inside an interference beam spot. The experimental results indicated that the prototype can achieve a measurement speed of 158.2 mm/s, while the resolution can achieve 0.6 nm and $0.13~\mu $ rad. The prototype was compared against a commercial interferometer and autocollimator; the difference was at nanometer and microrad levels. Further, the prototype was used to calibrate a commercial piezo stage. The maximum motion speed of the stage is 3.3 mm/s, within a motion range of $100~\mu $ m, the repeatability achieves 1 nm, and the linear error is below 10 nm.