Liang Yu

Dr. Liang Yu


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2020 in Measurement Science and Technology
Verified
Journal Article
Closed access
PDF file
Liang YuLiang Yu
Liang Yu
GMGabor Molnar
Gabor Molnar
CWChristian Andreas Werner
Christian Andreas Werner
CWChristoph Weichert
Christoph Weichert
RKRainer Koening
Rainer Koening
JFJens Fluegge
Jens Fluegge
In this paper, a camera-based 3DoF homodyne interferometer is proposed to measure displacements and rotations with precision below nanometre/microradian level. The interferometer uses a single beam, has a simple and compact layout and is easy to adjust. A spatial interference pattern is introduced by a tilted reference mirror and recorded by a camera chip. The variation of the spacing and orientation of the fringes is correlated with the yaw and pitch angular rotation of the moving mirror, while the phase correlates with its displacement. The noise level and resolution of displacement and angle measurements were determined to be below 5 pm/√Hz and 5 nrad/√Hz above 1 Hz. Periodic nonlinearities of the system were mainly caused by multi-reflections between optical surfaces in the system. By choosing particular components and improving their adjustment, the displacement nonlinearity was reduced to be below 0.1 nm, and angle nonlinearities achieved sub-microradian level.

10 December 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Liang YuLiang Yu
Liang Yu
XFXingyang Feng
Xingyang Feng
Pengcheng HuPengcheng Hu
Pengcheng Hu
XLXionglei Lin
Xionglei Lin
TJTao Jing
Tao Jing
The development of high-precision satellites has increased the demand for ultraprecision three-degrees-of-freedom (3-DOF) angle measurements for detecting structural deformation. The required instrument should simultaneously measure pitch, yaw, and roll angles using a single reference point. This paper proposes a 3-DOF angle measurement method based on the wavefront interference principle, and a mathematical model and its decoupling algorithm were built. Then, an angle-sensing probe with an extremely simple structure was designed and constructed. Finally, a series of experiments were performed to verify the method’s feasibility. The experiment results showed that the roll, pitch, and yaw measurement resolution of the probe was better than 10, 1, and 1 μrad, respectively, providing a high-performance 3-DOF angle measurement with a single probe. The short-term stabilities of roll, pitch, and yaw were better than 22, 1.7, and 2.0 μrad, respectively.

30 October 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Haijin FuHaijin Fu
Haijin Fu
ZWZheng Wang
Zheng Wang
XLXionglei Lin
Xionglei Lin
XXXu Xing
Xu Xing
Ruitao YangRuitao Yang
Ruitao Yang
Liang YuLiang Yu
Liang Yu
This paper proposes a two-dimensional precision level for real-time measurement using a zoom fast Fourier transform (zoom FFT)-based decoupling algorithm that was developed and integrated in an FPGA. This algorithm solves the contradiction between obtaining high resolution and obtaining high measurement speed, and achieves both high angle-resolution measurement and real-time measurement. The proposed level adopts a silicone-oil surface as the angle-sensitive interface and combines the principle of homodyne interference. By analyzing the frequency of the interference fringes, the angle variation can be determined. The zoom-FFT-based decoupling algorithm improves the system’s frequency resolution of the interference fringes, thereby significantly enhancing the angle resolution. Furthermore, this algorithm improves the efficiency of angle decoupling, while the angle decoupling process can also be transplanted to the board to realize real-time measurement of the level. Finally, a prototype based on the level principle was tested to validate the effectiveness of the proposed method. The principle analysis and test results showed that the angle resolution of the prototype improved from 9 arcsec to about 0.1 arcsec using this angle-solution method. At the same time, the measurement repeatability of the prototype was approximately ±0.2 arcsec. In comparison with a commercial autocollimator, the angle measurement accuracy reached ±0.6 arcsec.

8 May 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Pengcheng HuPengcheng Hu
Pengcheng Hu
XLXionglei Lin
Xionglei Lin
YZYifan Zhang
Yifan Zhang
Liang YuLiang Yu
Liang Yu
With the rapid development of ultraprecision instruments, inclinometers play an essential role in machining and calibration. The current mainstream methods based on capacitance, inductance, or optoelectronic autocollimators can achieve a high resolution but they are not directly traceable. In addition, their systems are relatively complex and large. In this study, a novel dual-axis optoelectronic inclinometer is proposed, the tilt angle can be precisely measured by calculating the spatial frequency of wavefront interference fringes, and the liquid surface is applied as its reference. Compared with other interferometers and autocollimators, the proposed inclinometer is not sensitive to mechanical errors and the air refractive index. Therefore, the measurement result is directly traceable to gravity and the laser wavelength. A compact prototype was fabricated to verify the effectiveness of the proposed method. Our experimental results show that the prototype achieves a low longterm drift of 0.02 arcsec/h and a resolution of greater than 0.1 arcsec, with high sensitivity and stability. Compared with a commercial autocollimator, the linear error of the prototype was less than 0.16%.

9 January 2026 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Haibin WuHaibin Wu
Haibin Wu
浩吕浩然 吕
浩然 吕
aili wangaili wang
aili wang
SYSiqi Yan
Siqi Yan
GMGabor Molnar
Gabor Molnar
MWMinhui Wang
Minhui Wang
The existing multimodal image classification methods often suffer from several key limitations: difficulty in effectively balancing local detail and global topological relationships in hyperspectral image (HSI) feature extraction; insufficient multi-scale characterization of terrain features from light detection and ranging (LiDAR) elevation data; and neglect of deep inter-modal interactions in traditional fusion methods, often accompanied by high computational complexity. To address these issues, this paper proposes a comprehensive deep learning framework combining convolutional neural network (CNN), a graph convolutional network (GCN), and wavelet transform for the joint classification of HSI and LiDAR data, including several novel components: a Spectral Graph Mixer Block (SGMB), where a CNN branch captures fine-grained spectral–spatial features by multi-scale convolutions, while a parallel GCN branch models long-range contextual features through an enhanced gated graph network. This dual-path design enables simultaneous extraction of local detail and global topological features from HSI data; a Spatial Coordinate Block (SCB) to enhance spatial awareness and improve the perception of object contours and distribution patterns; a Multi-Scale Elevation Feature Extraction Block (MSFE) for capturing terrain representations across varying scales; and a Bidirectional Frequency Attention Encoder (BiFAE) to enable efficient and deep interaction between multimodal features. These modules are intricately designed to work in concert, forming a cohesive end-to-end framework, which not only achieves a more effective balance between local details and global contexts but also enables deep yet computationally efficient interaction across features, significantly strengthening the discriminability and robustness of the learned representation. To evaluate the proposed method, we conducted experiments on three multimodal remote sensing datasets: Houston2013, Augsburg, and Trento. Quantitative results demonstrate that our framework outperforms state-of-the-art methods, achieving OA values of 98.93%, 88.05%, and 99.59% on the respective datasets.

15 July 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Pengcheng HuPengcheng Hu
Pengcheng Hu
XLXionglei Lin
Xionglei Lin
GMGabor Molnar
Gabor Molnar
CWChristian Werner
Christian Werner
HFHaijin Fu
Haijin Fu
Liang YuLiang Yu
Liang Yu
Camera-based three-degree-of-freedom (3DoF) interferometers can be used to simultaneously measure the displacement, yaw, and pitch. Furthermore, high precision can be achieved in these interfrometers with a fairly compact structure. However, they suffer from the problem of the 10-Hz-level frame rate of the used camera sensor, which limits their measurement speed to micrometer per second. Therefor, this study proposes a dual-parallel-pixel-row decoupling (DPPRD) method. Here, 3DoF results are decoupled using two pixel-rows rather than an entire image. Hence, the DPPRD can overcome the hardware limitations of the area-scan camera; therefore, the frame rate and measurement speed can be further improved. The features introduced by the DPPRD method, particularly the influence of pixel-row interval on pitch angle measurement, are analyzed and simulated. Further, a interferometer prototype is developed and optimized using an industrial area-scan camera to verify the feasibility of the proposed method. Experimental results show that the resolution can achieve 0.8 nm and 0.5 μrad levels, and the measurement accuracy can reach nanometer and microradian levels. The maximum measurement speed can be substantially improved approximately 44.25 times without modifying the hardware, and for some area-scan cameras the measurement speed can exceed 1 mm/s.