The synthesis of new composite nanomaterials based on graphene oxide (GO)modified with cellulose and its derivatives, as well as nanocellulose, is currently an important direction and contributes toward solving many problems in various fields such as nanotechnology, information technology, medicine, high-dielectric materials, and nanoelectronics. In this work, for the first time, for the production of GO and its membrane with carboxymethylcellulose (CMC), local Kazakhstan “Ognevsky” graphite was used as the initial raw material. In this regard, the preparation of nanocomposites of GO modified with cellulose derivatives, including CMC, attracts great interest from scientists and expands its field of practical application due to the significant changes in its physicochemical properties. In this work, the GO obtained using the Hummers method was modified by CMC, and its physicochemical, structural, and electrical characteristics were studied. The GO/CMC membrane was synthesized by mixing 1% GO with crushed solid mass of CMC (0.03 g; 0.06 g; 0.15 g) and then processing using ultrasound. The surface morphology of the GO/CMC membrane was studied using scanning electron microscopy (SEM). It has been established that by increasing the mass of CMC (0.03 g; 0.06 g; 0.15 g), the polymerization of CMC occurs on the surface of GO nanosheets. Cross-sectional micrographs of GO/CMC show the formation of sandwich-like layered structures. The synthesis efficiency (yield) of GO from synthetic graphite is 10.8%, and GO from Ognevsky graphite is 11.9%, almost 1.1% more than GO from synthetic graphite. The mechanical tensile strength increases from 2.3 MPa to 14.3 MPa and the Young’s modulus from 2.3 MPa to 143 MPa. The electrical parameters of the humidity sensor based on GO and GO/CMC membranes (0.03 g; 0.06 g; 0.15 g) were studied as a function of humidity to determine the performance of the device.

One of the most interesting and poorly studied carriers of medicinal substances is the polymer clay composite material (PCCM). Bentonite clays are used in pharmacy for the manufacturing of various dosage forms, as well as in the adsorption of drugs to slow their release. Polymer–clay nanocomposites have demonstrated significantly improved properties compared to pure polymers. A review of recent scientific advances has shown promising results regarding the application of polymer–clay materials in medicine and bioengineering, particularly in the development of carrier sorbents with prolonged action for controlled drug release. As a result, interest in polymer–clay systems is steadily growing and gaining momentum. This paper focuses on the structure and properties of bentonite clays, including their sorption, ion exchange, binding, and rheological properties. The methods for preparing intercalated and exfoliated nanocomposites, such as radical intercalative polymerization in situ on clay surfaces, are reviewed. Furthermore, the improved efficacy and exposure times of PCCMs, combined with their enhanced bactericidal properties, are analyzed for the creation of universal and multifunctional preparations for medical use.

In nowadays, the synthesis of new composite nanomaterials based on graphene oxide (GO) modified with cellulose and its derivatives, as well as nanocellulose, is an important direction and contributes to solve many problems in various fields such as: nanotechnology, information technology, medicine, high-dielectric materials and nanoelectronics. In this work, for the first time, for the production of GO and its membrane with carboxymethylcellulose (CMC), local Kazakhstan “Ognevsky” graphite was used as the initial raw material. In this regard, the preparation of nanocomposites of GO modified with cellulose derivatives, including CMC, attracts great interest from scientists and expands its field of practical application due to the amazing changes of physicochemical properties. In the work, the GO obtained by the Hummers method was modified by CMC, with following study of its physicochemical, structural and electrical characteristics. The GO/CMC membrane was synthesized by mixing 1% GO with crushed solid mass of CMC (0.03 g; 0.06 g; 0.15 g) and then was processed by ultrasound. The surface morphology of the GO/CMC membrane were studied using Scanning electron microscopy (SEM). It has been established that with an increasing in the mass of CMC (0.03 g; 0.06 g; 0.15 g), polymerization of CMC occurs on the surface of GO nanosheets. Cross-sectional micrographs of GO/CMC show the formation of sandwich-like layered structures.

At present, when the whole world is intensively switching to organic farming, the refusal or minimization of the usage of chemical plant protection products and synthesized fertilizers is a very urgent issue for the agro-industrial complex (AIC). Accordingly, the solution to the problems of increasing yields and ensuring the fight against pathogenic components should be carried out in accordance with the principles of “green” chemistry. In this regard, the usage of heteroleptic complexes based on carboxylic and amino acids with biogenic metals is dictated not only by their availability, low cost, and ability to increase crop yields but also by fungicidal activity, lower toxicity, and easy biodegradability, which lists them among the “green” and cost-effective plant biostimulants. In the present work, for the first time, a heteroleptic complex based on succinic acid and glycine, with the formula [Cu(succ)(gly)], was developed for usage as a fungicidal biostimulant, which has the ability to significantly reduce the number of pathogens. We found that this compound has a layered structure and was able to increase soybean germination up to 100%.

The characterization and biomedical modification of bentonite clays from the Kalzhat deposit (Kzh), which is situated in Kazakhstan’s Zhetysu region, are the main objectives of this work. In order to improve the raw material’s structural qualities, the montmorillonite fraction was enriched, and coarse impurities were eliminated using the Salo method. The presence of meso- and micropores that guarantee high dispersity and specific surface area, as well as the prevalence of montmorillonite and kaolinite, was all confirmed by physicochemical analysis. Particle size measurements indicated finely dispersed structures with a propensity to aggregate, whereas thermal analysis demonstrated resilience under heating. After effective functionalization with silver nanoparticles, a porous hybrid system with improved surface reactivity was produced. These enhancements demonstrate the modified bentonite’s usefulness as a multifunctional carrier for the immobilization and controlled release of pharmaceuticals, with potential uses in drug delivery systems, antimicrobial coatings, and wound-healing materials. The material has potential use in sorption and environmental protection technologies in addition to its biomedical application. Overall, Kzh’s structural and functional performance is greatly improved by the combination of purification and functionalization with silver nanoparticles, highlighting its promise as a useful element in the development of next-generation polymer–composite systems.

Synthetic materials used to enhance the productivity of agricultural crops have, in turn, begun to exert negative impacts on soil ecology. This has led to an increased interest in environmentally safe biomaterials. In this context, an antibacterial biofilm was developed based on oxidized starch and microcrystalline cellulose (MCC) as well as cellulose nanofibers (CNFs) derived from corn husk (CH). According to the obtained results, the film containing 3% CNFs exhibited the highest mechanical strength, reaching 3.87 MPa. To impart antibacterial properties to the resulting biofilm, different volumetric amounts of copper nanoparticles (CuNPs) synthesized via a green method were incorporated. As a result, the biofilm containing 1 mL of CuNPs demonstrated the highest antibacterial activity. It was also found that, compared to the pristine film, the mechanical strength of the CuNPs-immobilized biofilm decreased by threefold, while its flexibility increased. The antibacterial biofilm was comparatively characterized using FTIR, XRD, SEM, and TGA techniques, and its physicochemical properties were determined. The biodegradation behavior of the biofilm in soil was also investigated, revealing that 57% of its total mass degraded within 80 days. In this context, it was determined that the degradation of the biofilm did not significantly affect soil pH or the levels of macro- and microelements. Based on its physicochemical properties, the obtained biofilm demonstrates high potential for application in the agro-industrial sector as a mulching film, as well as in the production of food packaging materials and bioplastics.