Hexagonal boron nitride (h-BN), a wide-bandgap semiconductor with excellent thermal stability, high electrical resistivity, and strong neutron absorption capacity, has attracted growing interest in the field of solid-state neutron detection. This review summarizes the progress in h-BN crystal growth technologies, including HPHT, CVD, and flux methods, highlighting their advantages and limitations. Among them, flux growth stands out for its simplicity and scalability in producing high-quality, large-area single crystals. The application potential of h-BN in next-generation neutron detectors is also discussed, along with key challenges such as 10B enrichment, crystal quality, and device integration.
FeGa/FeNi bilayer structures with different deposition order were fabricated by the electrodeposition method on indium tin oxide (ITO) substrates. The structure, morphology, static and dynamic magnetic properties of FeGa/FeNi (FeNi/FeGa) films were investigated. The bilayer structures exhibit extremely various magnetic properties with different deposition order which could be attributed to the different coupling interaction in the interface. When FeGa is on top, the bilayer structures show lower coercivity than when FeNi is on top. Meanwhile, increase of the proportion of FeNi in the bilayer structure could affect the Hc and Mr/Ms. The ferromagnetic resonance peak of FeGa on top moves to a high field compared with FeNi on top. Moreover, FeGa on top shows improved complex permeability and a clear resonant phenomenon of the magnetization. These properties make FeGa/FeNi bilayer structure a potential candidate for high-frequency application.
Herein, we demonstrated an apparent electric field control of magnetization reorientation at room temperature, through a strain-mediated magnetoelectric coupling in ferromagnetic/ferroelectric (FM/FE) multiferroic heterostructure. As the applied electric field increased, the magnetization tended to deviate from the original direction, which was induced by nonlinear strain vs electric-field behavior from the ferroelectric substrates. Ferromagnetic resonance showed that the in-plane magnetic easy axis of the Co film was shifted sharply with electric field E = 10 kV/cm, which indicates that the in-plane uniaxial magnetic anisotropy of the Co film can be inverted via the application of an electric field. These results demonstrated that converse magnetoelectric effect in the FM/FE heterostructure was indeed a feasible method to control magnetization orientation in technologically relevant ferromagnetic thin films at room temperature.
We reported the non-volatile electric field-mediated magnetic properties in the half-metallic Heusler alloy Co2FeAl/Pb(Mg1/3Nb2/3)O3-PbTiO3 heterostructure at room temperature. The remanent magnetization with different applied electric field along [100] and [01-1] directions was achieved, which showed the non-volatile remanent magnetization driven by an electric field. The two giant reversible and stable remanent magnetization states were obtained by applying pulsed electric field. This can be attributed to the piezostrain effect originating from the piezoelectric substrate, which can be used for magnetoelectric-based memory devices.
Metallic magnetic materials are extensively used to mitigate electromagnetic interference due to their high Curie temperatures and permeability. However, their high permittivity often hinders impedance-matching effectiveness, limiting their utility. In this study, amorphous cobalt–iron (Co100−xFex) alloy nanoparticles with relatively low permittivity were synthesized using a simple aqueous reduction method at room temperature. The effect of atomic ratio variation on the microwave absorption properties of these nanoparticles was investigated across 2–18 GHz. The amorphous Co100−xFex nanoparticles exhibited excellent electromagnetic wave absorption performance, achieving an effective absorption bandwidth of 5.6 GHz, a matching thickness of 2.60 mm, and a reflection loss of −42 dB.
1 April 2022 in Journal of Magnetism and Magnetic Materials