The ZGGO:Cr,Mn phosphors exhibit color-changeable photoluminescence and persistent luminescence via excitation wavelength and temperature management, showing the enormous potential for anti-counterfeiting and information storage applications.
A versatile, low-temperature, and low-cost chemical conversion synthesis has been developed to prepare copper sulfide (Cu2S) nanotubes. The successful chemical conversion from ZnS nanotubes to Cu2S ones profits by the large difference in solubility between ZnS and Cu2S. The morphology, structure, and composition of the yielded products have been examined by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction measurements. We have further successfully employed the obtained Cu2S nanotubes as counter electrodes in dye-sensitized solar cells. The light-to-electricity conversion results show that the Cu2S nanostructures exhibit high photovoltaic conversion efficiency due to the increased surface area and the good electrocatalytical activity of Cu2S. The present chemical route provides a simple way to synthesize Cu2S nanotubes with a high surface area for nanodevice applications.
Controlling defects and interfaces in composite absorbers can effectively regulate electromagnetic (EM) parameters and enhance the electromagnetic wave (EMW) absorption ability, but the mechanism still needs to be further elucidated. In this study, ZnFe2O4/ZnO/C composite was synthesized via the hydrothermal method followed by post-annealing in different atmospheres. Defects and interfaces were characterized by Raman, PL spectroscopy, XPS and TEM, and their relationship with dielectric loss and EMW absorption performance was discussed in detail. Results show that the N2-annealed ZnFe2O4/ZnO/C composite with abundant defects and interfaces as well as an optimized composition exhibits excellent EMW dissipation ability, with a RLmin value of −17.4 dB and an fe of 3.85 GHz at a thickness of 2.28 mm. The excellent EMW absorption performance originates from suitable impedance matching, significant conduction loss and strong dielectric loss (interfacial polarization, diploe polarization and defect polarization) dominated by lattice defects and interfaces. This study provides a view into the relationship between defects, interfaces, EM parameters and EMW absorption ability, and also suggests an effective way to promote EMW dissipation ability of the absorbers by controlling defects and interfaces.
2 February 2021 in International Journal of Electrical Engineering & Education
In the study of college physics, experiment is the source of students' discovery and exploration of problems, which plays a crucial role in college physics and is also the focus of physics teaching. This paper mainly studies how to use B/S architecture and MVC design pattern according to the characteristics of college physics teaching, including user management and system function modules. In order to illustrate the role of virtual experiment scene based College Physics Teaching Platform in college physics learning, a virtual physics laboratory teaching platform based on B/S three-tier structure system and MVC mode is constructed by using Java, VRML and flash interactive technology. Based on the advantages of virtual technology, this platform starts with the construction of a teaching platform of virtual experiment scene, analyzes students' mastery of university physics experiments before and after the use of it, and then carries out a systematic survey of students' satisfaction, thus obtaining the influence of this teaching platform on university physics learning of college students. The results show that the platform constructed in this paper can help college students better grasp the operation of physical experiments, so as to better understand the relevant knowledge points in college physics learning, and has a good reference value.
Interfacial polarization is generally a major cause of dielectric loss, but its exact contribution to the electromagnetic wave (EMW) absorption capacity of absorbers remains to be elucidated. In this work, SnO2@rGO composite (S2) with tight interfaces formed by chemical bonds and SnO2/rGO mixture (S3) were synthesized by a simple chemical route followed by further calcined in argon, respectively. Compared with pure SnO2 (S1) and S3, S2 exhibits much better EMW-dissipation ability, with a smaller minimum reflection loss (RLmin) value of −20.5 dB at a matched thickness of 5 mm and a larger effective absorption bandwidth (fe) value of 5.8 GHz (from 11 GHz to 16.8 GHz) at 3.2 mm. By comprehensively comparing the defects, dipoles, and interfaces in S2 and S3, it is concluded that the excellent EMW absorption capacity of S2 is mainly caused by strong dielectric loss dominated by interfacial polarization as well as suitable impedance matching. This study provides an insight into the exact contribution of interfacial polarization to the EMW-dissipation ability of absorbers, showing that the EMW absorption of graphene-based composites can be effectively promoted by constructing well-connected interfaces between graphene and absorbers.
FeGa/FeNi bilayer structures with different deposition order were fabricated by the electrodeposition method on indium tin oxide (ITO) substrates. The structure, morphology, static and dynamic magnetic properties of FeGa/FeNi (FeNi/FeGa) films were investigated. The bilayer structures exhibit extremely various magnetic properties with different deposition order which could be attributed to the different coupling interaction in the interface. When FeGa is on top, the bilayer structures show lower coercivity than when FeNi is on top. Meanwhile, increase of the proportion of FeNi in the bilayer structure could affect the Hc and Mr/Ms. The ferromagnetic resonance peak of FeGa on top moves to a high field compared with FeNi on top. Moreover, FeGa on top shows improved complex permeability and a clear resonant phenomenon of the magnetization. These properties make FeGa/FeNi bilayer structure a potential candidate for high-frequency application.