Sound absorbing materials capable of working in harsh environments (e.g., fire resistance, moisture resistance, and pressure resistance) while having excellent low-frequency sound absorption properties are highly desirable for many practical applications. Recently, a new class of acoustic absorbers based on space coiling and folding metamaterials (SCFMs) has emerged. The SCFMs could be comprised of rigid plastics, ceramics, and metals and could be a good candidate for developing sound-absorbing devices capable of working in harsh environments. The SCFMs also enable flexible control of low-frequency sound with subwavelength structures, addressing the problem of poor absorption of low-frequency noise encountered by conventional acoustic materials. However, the current geometries of SCFM meta-atoms do not take full advantage of the configuration of three-dimensional space, limiting their ability for flexible control of sound absorption properties. Here, we propose an acoustic absorber based on stacked SCFMs with side openings, which could effectively absorb line-spectrum noise as well as broadband noise. The effects associated with the geometry and resonance modes of SCFMs are shown to significantly influence the sound absorption properties. To understand the sound-metamaterial interaction, an analytical model is obtained to study the acoustic response of SCFMs, which is further validated by numerical simulations. Further experiments have demonstrated the acoustic properties of our proposed metamaterial structure and confirmed the capability of stacked SCFMs for flexible control of the acoustic absorption spectrum. This work provides new possibilities for the development of novel sound absorption metamaterials desirable for many practical applications.
Wall fluctuating pressure in the boundary layer is critical for physical understanding of the surface flow and detection resolution optimization of the underwater vehicle. In this study, a flexible MEMS vanadium-doped zinc oxide (VZO) film piezoelectric pressure sensor array is developed for underwater applications. 2% vanadium-doped zinc oxide film achieves figure of merit of -54.5, far higher than the previous records of the contemporary thin films, indicating excellent receiving sensitivity. The sensors are designed and fabricated using a 4-mask VZO-on-SOI process. An array of 2×5 sensors is flexibly integrated on a polyimide foil and insulated by a parylene C waterproof cover. Calibrations in a plane wave tube are demonstrated. About 0.64± 0.06 mV/Pa pressure sensitivity at the frequency of 10 Hz to 2 kHz and the maximum nonlinearity of 0.3% from 0 to 50 Pa are achieved. The capabilities of the flexible sensors array in a real-time sensing situation on an underwater vehicle model are validated. The laminar, transition and turbulent flow at different positions of the vehicle model are detected successfully from the sensor outputs. The result shows that the amplitude and power energy of the fluctuation pressure at the transition case are higher than that of the laminar and turbulent flow. The presented sensors array with merits of low power, miniature size and low foot-print, offers a flexible and readily surface-mountable system, exhibiting promising potentials in underwater applications.
In this paper, we proposed a novel long-period fiber grating strain sensor based on local ellipse-core fiber (LEC-LPFG). The LEC-LPFG was fabricated by laser polishing and local heating methods, which could efficiently transform a single-mode fiber (SMF) into a periodic ellipse-core fiber. The effects associated with the fiber elliptical core shape were shown to significantly influence the strain sensitivity of the LEC-LPFG. Further, it was demonstrated that the LEC-LPFG has a high strain sensitivity of −20.2 pm/ $\mu \varepsilon $ and a temperature sensitivity of 68.6 pm/°C. Our work provides a new technology for straightforward, low-cost, and large-scale productions of premium fiber optical strain sensors which are desirable in many practical applications.
11 November 2025 in Sensors and Actuators A: Physical
Space-folded acoustic metamaterials (SFAMs) have exceptional low frequency sound control capability in deep sub-wavelength scale, showing significant potential for weak acoustic signal detection. However, lowering the working frequencies of SFAMs may increase the device size, limiting their applications and raising production costs. To address these issues, this study proposes compact SFAM acoustic amplifiers operating in low frequencies, where their working frequencies are flexibly controlled by engineering effective density without increasing device size. Further experiments have demonstrated the capability of wide range frequency control of SFAM through engineering its effective density. The experimental results clearly indicate that the low frequency tuning of SFAMs results from controlling SFAMs' channel width gradients, which is associated with the spatial distribution of metamaterial's effective density. Further studies reveal that compared to the gradient density distribution method in SFAMs, the step density distribution method may have superior low frequency control of acoustic waves, which are capable of frequency tuning of SFAM acoustic amplifier over one octave band. This work provides possibilities for the development of low frequency acoustic amplifiers, where the merits include compact size, lightweight, and low cost, which are highly desirable for acoustics sensing and noise control applications.
1 March 2026 in The Journal of the Acoustical Society of America
Vortex beams carrying orbital angular momentum have been extensively investigated and applied in acoustics and electromagnetics, but the generation of flexural wave vortices in thin plates still lacks a simple and feasible method. Here, this work proposes an elastic metasurface based on ring-shaped and partitioned acoustic black holes (RPABH). By tailoring the residual thickness of RPABH unit cells, full 0–2π phase shift control with high transmittance is achieved. Numerical and experimental studies confirm that this metasurface converts incident cylindrical waves into flexural wave vortices. The topological charge is linearly related to the number of supercells, and the vortex rotation direction is programmably controllable. This design provides a passive and effective approach for flexural wave vortices generation and may offer new insights into particle manipulation and structural health monitoring.