Phase change memory has been considered as the next generation in non-volatile electronic data storage. The property modulation of such materials by the doping of rare-earth elements has drawn a lot of attention, which motivates us to search for the optimal dopants and reveal the underlying mechanisms. Here, we investigate the role of Gd as a dopant in Ge2Sb2Te5, which exhibits higher crystalline resistance and better thermal stability and antioxidant capacity than the undoped counterpart. Moreover, Gd dopants suppress both the processes of phase transition and grain growth. The crystalline structure remains unchanged with Gd dopants and vacancies are randomly distributed. Furthermore, the bonding mechanism was theoretically investigated. In the amorphous state, Gd atoms modify the local structures around Ge, Sb, and Te atoms. The large coordination number of Gd and the “Gd–Te distorted pentagonal bipyramidal-like” structure can be attributed to the good thermal stability. These microscopic findings figure out some of the key issues about the bonding mechanism, electrical properties, and crystallization behaviors of Gd doped phase change memory materials, which could be useful for storage devices.
Herein, electron beam-induced damage and recovery of a silicon thin film was investigated in situ via transmission electron microscopy (TEM). Via only controlling the electron beam flux, the damage and recovery processes could be controlled under electron beam irradiation at ambient temperature with an energy of 200 keV. Above the threshold value of the flux, the crystalline phase was transformed into an amorphous state, even formed a hole. The damage process became more pronounced with the increasing electron flux. Under this threshold value, the reverse process, including hole recovery and recrystallization, can be achieved. The effects of flux and the mechanisms regarding these phenomena have been proposed. This study can provide insights into the shaping of materials and control of their structure through high energy beam engineering.
Raman spectroscopy has become a key tool for resolving the molecular behavior of interfaces due to its non-invasiveness, fingerprinting ability and in situ detection advantages. Surface-enhanced Raman scattering (SERS) and its derivative techniques (including SHINERS and TERS) have significantly overcome the challenges of weak interfacial signals and strong water interference through the synergistic effect of electromagnetic field enhancement and chemical enhancement. They have realized highly sensitive molecular detection at various interfaces such as solid–liquid, gas–liquid, water–oil, and so on. Despite the challenges of substrate stability and signal quantization, the deep integration of multi-technology coupling and theoretical computation will further promote the breakthrough of this technology in interface science. In this review, we systematically review the applications of Raman spectroscopy and SERS techniques in interface resolution, including key research directions such as analyzing interfacial molecular structures, detecting material reactions at water–oil interface, and tracking the evolution of electrochemical interfacial species, as well as exploring the technological bottlenecks and future development directions.
In this work, we designed a micro-electromechanical systems (MEMS) device that allows simultaneous direct measurement of mechanical properties during deformation under external stress and characterization of the evolution of nanomaterial microstructure within a transmission electron microscope. This MEMS device makes it easy to establish the correlation between microstructure and mechanical properties of nanomaterials. The device uses piezoresistive sensors to measure the force and displacement of nanomaterials qualitatively, e.g., in wire and thin plate forms. The device has a theoretical displacement resolution of 0.19 nm and a force resolution of 2.1 μN. The device has a theoretical displacement range limit of 5.47 μm and a load range limit of 55.0 mN.
The use of lead-free ceramic film materials with positive temperature coefficient of resistivity (PTCR) is widespread in temperature heaters and sensors in micro-electromechanical systems. In this research, the out of plane transport properties of the BiFeO3 (BFO) films have been studied. Surprisingly, PTCR was found in the BFO ceramic films due to the strongly correlated interaction between the multiferroic material BFO and the superconductor YBCO perovskite oxides. To our knowledge, this is the first report on the PTCR effect of BFO films. The BFO/YBCO interface and the bulk conductivity of BFO are important for the PTCR effect, as they make it possible to compare the transport properties of Au/BFO/YBCO- and YBCO/BFO/YBCO-type structures. PTCR was observed in Au/BFO/YBCO at a bias voltage of more than 2 V, but not in the YBCO/BFO/YBCO, even with a 40 V bias voltage. PTCR was found after BFO breakdown of a YBCO/BFO/YBCO capacitor. This indicated that the conductivity of BFO is critical for PTCR. The dependence of PTCR on the superconducting transition temperature illustrates that a cooper-pair can be injected into BFO. Our work presents a method by which to produce a lead-free ceramic film material with PTCR.
The practical adoption of surface-enhanced Raman scattering (SERS) technology is often hampered by the high cost, complex fabrication, and poor reproducibility of conventional substrates, which typically rely on noble metals or inefficient semiconductors. Herein, we address key challenges in the practical commercialization of surface-enhanced Raman scattering (SERS) technology by reporting a facile, scalable, and environmentally benign strategy for fabricating a hybrid SERS substrate. This approach integrates Au nanoparticles (NPs) with hydrothermally synthesized WO3 nanowires through a green photoreduction process, which is rapid, organic-solvent-free, and amenable to large-scale production. The design of the Au/WO3 nanocomposite capitalizes on the synergistic effect between electromagnetic (EM) enhancement from Au NPs and chemical mechanism (CM) enhancement via charge transfer involving the WO3 semiconductor. This synergy empowers the substrate with exceptional SERS activity, enabling the sensitive detection of Rhodamine 6G (R6G) down to 10−11 M and yielding an enhancement factor (EF) of 4.09 × 106. More importantly, this EM-CM synergy proves critical for detecting molecules with weak affinity, such as the nerve agent simulant dimethyl methylphosphonate (DMMP), achieving a significant signal enhancement of 102–103 times, which is notably challenging for conventional plasmonic substrates. Beyond sensitivity, the substrate exhibits excellent reproducibility and operational stability, which are paramount for real-world applications. This work presents a nanohybrid strategy that successfully balances scalability, stability, and sensitivity, offering a reliable and cost-effective pathway for advancing SERS technologies toward practical implementation.