Composite materials with bioresorption properties are promising for use in traumatological and orthopedic practice as a material of various fixing implants for osteosynthesis and for replacement of bone defects. This article reviews the preparation methods, physicochemical and biological properties of biodegradable composites based on polyesters and calcium phosphate fillers, and the design and manufacture of implants based on these composites.
In2O3 nanoparticles were obtained by annealing precursors that had been hydrothermally/solvothermally synthesized at 200 °C using In(NO3)3·4.5H2O as the starting material. Three solvents were used for the synthesis, namely water, alcohol and ethylene glycol. Urea or glycine additives were introduced into the reaction mixtures as stabilizing and structure-forming agents. The nanopowders obtained were characterized using X-ray diffraction, scanning and transmission electron microscopy, low-temperature nitrogen adsorption and X-ray photoelectron spectroscopy. The gas-sensing characteristics of the indium oxide-based sensors were investigated for the detection of hydrogen in air. It has been established that the nature of the solvent determines the phase composition and structure of indium oxide, while organic additives reduce the particle size and increase the specific surface area. It should be noted that the addition of glycine to an alcohol solution of indium nitrate during synthesis produces a phase transformation. The results show that the sensor based on In2O3 synthesized using this mixture has the best hydrogen sensing properties of all the materials considered in this study.
The hydrogen temperature-programmed reduction (H2-TPR) method was used to analyze the sensing properties of nanostructured indium oxide for hydrogen detection. Commercial and mechanically activated In2O3 samples were selected for investigation. Mechanical activation leads to the generation of surface defects and an increase in specific surface area, which enhances sensitivity to H2 and lowers the sensor operating temperature. An approach is proposed that allows a qualitative and quantitative relationship to be established between the H2-TPR profiles of the oxides and the sensor response. This relationship is based on a model of electron transfer across a potential barrier at grain boundaries, formed with the participation of adsorbed oxygen. The temperature dependence of the sensor response is found to be determined by the concentration of negatively charged oxygen on the surface of the nanoparticles, which, in turn, depends on temperature. Using the sensor sensitive layer based on indium oxide as an example, a correlation is established between the parameters of the TPR profiles and the sensor response.
В работе проводится исследование спектров комбинационного рассеяния (КР) света ряда материалов на основе полилактида: стереоизомеров полилактида, олигомеров L-лактида, сополимеров L-лактида и ε-капролактона, композитов поли(L-лактида) и гидроксиапатита. Установлено, что по спектрам КР можно определять состав и степень кристалличности широкого круга материалов на основе полилактида. Развитие такой методики очень важно для разработки инновационных материалов на основе полилактида, используемых как для разнообразных медицинских применений, так и, например, при создании биоразлагаемой одноразовой упаковки для решения проблем загрязнения окружающей среды.