Lennart Waalkes

Dr. Lennart Waalkes


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HWHagen Watschke
Hagen Watschke
LWLennart Waalkes
Lennart Waalkes
CSChristian Schumacher
Christian Schumacher
TVThomas Vietor
Thomas Vietor
Multi-material additive manufacturing (AM) offers new design opportunities for functional integration and opens new possibilities in innovative part design, for example, regarding the integration of damping or conductive structures. However, there are no standardized test methods, and thus test specimens that provide information about the bonding quality of two materials printed together. As a result, a consideration of these new design potentials in conceptual design is hardly possible. As material extrusion (ME) allows easily combination of multiple polymeric materials in one part, it is chosen as an AM technique for this contribution. Based on a literature review of commonly used standards for polymer testing, novel test specimens are developed for the characterization of the bonding quality of two ME standard materials printed together. The proposed specimen geometries are manufactured without a variation of process parameters. The load types investigated in the course of this study were selected as examples and are tensile, lap-shear, and compression-shear. The conducted tests show that the proposed test specimens enable a quantification of the bonding quality in the material transition. Moreover, by analyzing the fracture pattern of the interface zone, influencing factors that probably affect the interface strength are identified, which can be further used for its optimization.

4 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
LWLennart Waalkes
Lennart Waalkes
JLJan Längerich
Jan Längerich
PIPhilipp Imgrund
Philipp Imgrund
CEClaus Emmelmann
Claus Emmelmann
Piston-based material extrusion enables cost savings for metal injection molding users when it is utilized as a complementary shaping process for green parts in small batch sizes. This, however, requires the use of series feedstock and the production of sufficiently dense green parts in order to ensure metal injection molding-like material properties. In this paper, a methodological approach is presented to identify material-specific process parameters for an industrially used Ti-6Al-4V metal injection molding feedstock based on the extrusion force. It was found that for an optimum extrusion temperature of 95 °C and printing speed of 8 mm/s an extrusion force of 1300 N ensures high-density green parts without under-extrusion. The resulting sintered part properties exhibit values comparable to metal injection molding in terms of part density (max. 99.1%) and tensile properties (max. yield strength: 933 MPa, max. ultimate tensile strength: 1000 MPa, max. elongation at break: 18.5%) depending on the selected build orientation. Thus, a complementary use could be demonstrated in principle for the Ti-6Al-4V feedstock.

4 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
KJKevin Janzen
Kevin Janzen
KKKim Julia Kallies
Kim Julia Kallies
LWLennart Waalkes
Lennart Waalkes
PIPhilipp Imgrund
Philipp Imgrund
CEClaus Emmelmann
Claus Emmelmann
Metal binder jetting shows great potential for medical technology. This potential can be exploited by integrating binder jetting into existing process routes known from metal injection molding. The biggest challenge here is the flowability and packing behavior of the powders used, due to their low size distributions. This paper investigates different powder-drying strategies to improve flowability using a statistical experimental design. Because of its relevance for medical applications, spherical Ti-6Al-4V powder with a size distribution under 25 µm is dried under various parameters using vacuum and gas purging. The investigated parameters, time and temperature, are selected in a central-composite-circumscribed test plan with eleven tests and three center points. The target parameters—water content, flowability and impurity levels (oxygen, nitrogen)—of the powder are analyzed. For validation, practical test trials are carried out on an industrial binder jetting system with unconditioned powder and conditioning with optimized parameters, comparing the manufactured parts and the powder bed. An optimized drying cycle with a duration of 6 h at 200 °C was determined for the investigated powder. Significant improvements in the dimensional accuracy (from ±1.5 to 0.3%) of the components and the visual impression of the powder bed are demonstrated.

1 February 2023
Verified
Book Chapter
Closed access
PDF file
LWLennart Waalkes
Lennart Waalkes

1 February 2023
Verified
Book Chapter
Closed access
PDF file
LWLennart Waalkes
Lennart Waalkes

1 February 2023
Verified
Book Chapter
Closed access
PDF file
LWLennart Waalkes
Lennart Waalkes