Gulzhaz Moldabayeva

Dr. Gulzhaz Moldabayeva

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
Kuat KombayevKuat Kombayev
Kuat Kombayev
Fuad KhoshnawFuad Khoshnaw
Fuad Khoshnaw
GUGulzhaz Uazyrkhanova
Gulzhaz Uazyrkhanova
GMGulzhaz Moldabayeva
Gulzhaz Moldabayeva
This study aimed to develop an alternative surface hardening technique for low-carbon steel alloy type 20Ch using plasma electrolytic oxidation (PEO). The surface hardening of 20Ch alloy steel samples was achieved through PEO in a Na2CO3 electrolyte solution. Optimal processing parameters were determined experimentally by measuring voltage and applied current. Quenching was performed in the electrolyte stream, and plasma was ionised through excitation. A mathematical model based on thermal conductivity equations and regression analysis was developed to relate the key parameters of the hardening process. The results from both the experimental and mathematical models demonstrated that PEO significantly reduces hardening time compared to traditional methods. The microstructural images revealed the transformation of the coarse-grained pearlite–ferrite structure into quenched martensite. Vickers microhardness tests indicated a substantial increase in surface hardness after PEO treatment, compared to the untreated samples. The major advantages of PEO include lower energy consumption, high quenching rates, and the ability to perform localised surface treatments. These benefits contribute to overall cost reduction, making PEO a promising surface hardening method for various industrial applications.

26 November 2025 in Materials
Verified
Journal Article
Open access
PDF file
GUGulzhaz Uazyrkhanova
Gulzhaz Uazyrkhanova
ASAmangeldi Sagidugumar
Amangeldi Sagidugumar
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
GMGulzhaz Moldabayeva
Gulzhaz Moldabayeva
DKDaniyar Kaliyev
Daniyar Kaliyev
NKNurgamit Kantay
Nurgamit Kantay
This study focuses on surface modification of aluminum alloys (Al–Si) with high silicon content using plasma electrolytic oxidation (PEO). The influence of Al2O3 and SiO2 particles, introduced both separately and in combination, into a sodium aluminate-based electrolyte during high-frequency treatment (2000 Hz). Examination of surface and cross-sections using a scanning electron microscope SEM showed an increase in the compactness of the coating when Al2O3 particles were introduced. The addition of SiO2 particles tended to promote a smoother surface and a slight reduction in the porosity and defect density. However, when these particles are added together, especially at high concentrations, an increase in structural defects and crack formation is observed. X-ray diffraction analysis revealed that the γ-Al2O3 phase was present in all coatings. In the samples with Al2O3 addition, the α-Al2O3 diffraction signal became stronger compared with the other coatings. Tribological tests revealed that the addition of Al2O3 particles significantly improved wear resistance, while the introduction of SiO2 particles contributed to the stabilization of the friction coefficient. Thus, Al2O3 particles were the most effective in enhancing the mechanical properties of the coating.

1 March 2026 in Coatings
Verified
Journal Article
Open access
PDF file
GUGulzhaz Uazyrkhanova
Gulzhaz Uazyrkhanova
Kuat KombayevKuat Kombayev
Kuat Kombayev
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
GMGulzhaz Moldabayeva
Gulzhaz Moldabayeva
Małgorzata RutkowskaMałgorzata Rutkowska
Małgorzata Rutkowska
Fuad KhoshnawFuad Khoshnaw
Fuad Khoshnaw
The study aims to strengthen cylindrical liners by plasma electrolytic oxidation (PEO) and to determine the optimal processing parameters for forming wear-resistant coatings. The results of laboratory experiments were transferred to practical application for liner strengthening, followed by testing coatings formed directly on real components. PEO was applied to cylindrical sleeves made of eutectic aluminum–silicon alloy EN AC-48000 to form mechanically strong and wear-resistant oxide coatings. The coating had a two-layer structure: a dense inner barrier layer and a porous outer layer. The effect of SiO2 (~20 nm) and Al2O3 (~30 nm) nanoparticles in the electrolyte on the morphology, phase composition, microhardness and tribological characteristics of the coatings was evaluated. The optimal PEO parameters were determined as 325 V, duty cycle 25%, processing time 12 min, average current density 1.4 A·dm−2, and concentration of Al2O3 + SiO2 (5 + 5 g L−1). Under these conditions, the coating achieved a maximum microhardness of 259 HV, a low coefficient of friction of ~0.50 and a wear rate of 0.81 × 10−4 mm3·N−1·m−1. X-ray diffraction analysis confirmed the formation of γ-Al2O3 without changing the silicon phase. The results provide quantitative data on the effects of nanoparticles and PEO parameters on coating properties, which is important for the development of long-life part surfaces. The increased microhardness and wear resistance are attributed to the formation of the ceramic γ-Al2O3 phase and the densification of the porous structure due to the incorporation of Al2O3 and SiO2 nanoparticles, which reduce defect density and limit the adhesive–abrasive wear mechanism.

25 June 2026 in Bulletin of the Karaganda University "Physics Series"
Verified
Journal Article
Closed access
Kuat KombayevKuat Kombayev
Kuat Kombayev
GMGulzhaz Moldabayeva
Gulzhaz Moldabayeva
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
GUG.K. Uazyrkhanova
G.K. Uazyrkhanova
YTYERKEZHAN TABIYEVA
YERKEZHAN TABIYEVA
DKDauir Kakimzhanov
Dauir Kakimzhanov
This paper presents the results of a comprehensive investigation of the structural, phase, and mechanical properties of plasma electrolytic oxidation (PEO) coatings formed on the surface of EN AC-45000 (AlSi6Cu4) aluminium–silicon alloy in an electrolyte containing Al2O3 and SiO2 nanoparticles. The aim of the study was to determine the effect of electrolyte nanomodification on the morphology, phase composition, and microhardness of PEO coatings. The PEO process was carried out in a NaOH-based aqueous electrolyte with the addition of aluminium and silicon oxide nanoparticles. The microstructure and morphology of the coatings were investigated using optical and scanning electron microscopy. The elemental and phase compo sition was determined by energy-dispersive analysis and X-ray diffraction. The mechanical properties were evaluated by measuring the microhardness using the Vickers method, while the tribological performance was assessed using the ball-on-disk method under dry sliding conditions. The results showed that a two-layer ox ide coating was formed on the alloy surface, consisting of a dense inner α-Al2O3 barrier layer and a porous outer layer predominantly composed of γ-Al2O3. The incorporation of nanoparticles contributed to coating densification, reduced porosity, and promoted a more uniform distribution of micro-arc discharges. After PEO treatment, the surface microhardness increased from 65–80 HV to approximately 245–250 HV, repre senting more than a threefold increase. The coatings also exhibited a stable tribological response, character ized by a higher yet stable coefficient of friction and improved wear resistance compared to the untreated al loy. These results demonstrate the high potential of nanomodified PEO for enhancing the operational perfor mance of aluminium–silicon alloys.