David Santiago

Dr. David Santiago

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Open access
DSDavid Santiago
David Santiago
MFMu Fang
Mu Fang
AZAshraf Uz Zaman
Ashraf Uz Zaman
MLMiguel A.G. Laso
Miguel A.G. Laso
TLTxema Lopetegi
Txema Lopetegi
IAIvan Arregui
Ivan Arregui
This letter proposes a new design approach for filtering antennas. The novel matching reflection coefficient based method allows the integration of filters and antennas without compromising the frequency behavior of either of these components. Moreover, this integration is done avoiding the need of lengthy optimization processes and provides a high degree of flexibility in the types of antennas that can be used. In order to validate it, two examples are provided. In both cases, a 4 th -order Chebyshev bandpass filter at 101.5 GHz implemented in stacked groove gap waveguide (GGW) configuration is used, firstly along with a single aperture antenna and, subsequently, with a slotted ridge gap waveguide (RGW) array. This second example has been manufactured to demonstrate the usefulness of the new design methodology. Excellent measured performance has been obtained for a filtering antenna at W-band for the first time.

31 December 2022 in Journal of Infrared, Millimeter, and Terahertz Waves
Verified
Journal Article
Open access
PDF file
DSDavid Santiago
David Santiago
ATAdrián Tamayo-Domínguez
Adrián Tamayo-Domínguez
MLMiguel A. G. Laso
Miguel A. G. Laso
TLTxema Lopetegi
Txema Lopetegi
JFJosé-Manuel Fernández-González
José-Manuel Fernández-González
IAIván Arregui
Iván Arregui
In this paper, a W-band 3D-printed bandpass filter is proposed. The use of higher-order TE10n modes in groove gap waveguide (GGW) technology is evaluated in order to alleviate the manufacturing requirements. In addition to the use of higher-order modes, the coupling between them is analyzed in detail to improve the overall fabrication robustness of the component. This allows the implementation of narrow-band filters operating at millimeter-wave frequency bands (or above), which usually demand complex manufacturing techniques to provide the high accuracy required for this kind of devices. In order to show the applicability of the proposed method, a narrow-band 5th-order Chebyshev bandpass filter centered at 94 GHz, which can be easily fabricated by state-of-the-art stereolithographic (SLA) 3D-printing techniques followed by silver coating, is shown. Excellent measured performance has been obtained.

17 August 2023 in IEEE Access
Verified
Journal Article
Open access
DSDavid Santiago
David Santiago
MLMiguel A. G. Laso
Miguel A. G. Laso
TLTxema Lopetegi
Txema Lopetegi
IAIvan Arregui
Ivan Arregui
In this paper, a groove gap waveguide (GGW) low-pass filter is proposed for the first time. Gap waveguide technology represents an interesting alternative as a low-loss, cost-effective, high-performance transmission line and packaging solution for microwave and millimeter-wave systems. This technology may exhibit a frequency behavior similar to rectangular waveguide but with some advantages such as the no need of electrical contact between the upper and lower plates of the GGW, making it an attractive alternative in the design of satellite devices at high frequencies. However, all the previous literature focused on band-pass filters, while design methods for GGW low-pass filters have not been reported. Furthermore, in this paper a new manufacturing approach is proposed and its performance has been compared with traditional methods such as Computer Numerical Control (CNC) milling. The new approach relies on the Selective Laser Melting (SLM)-3D printing of the filter followed by a post-processing step, in which it is partially mechanized using CNC milling to improve the surface finish. Measurements of the manufactured prototypes are also included to compare both techniques at millimeter-waves, showing the advantages of the new fabrication method and the excellent agreement with the simulations.

15 May 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
SGSergio Garcia-Martinez
Sergio Garcia-Martinez
DSDavid Santiago
David Santiago
ATAdrián Tamayo-Domínguez
Adrián Tamayo-Domínguez
PSPablo Sanchez-Olivares
Pablo Sanchez-Olivares
IAIván Arregui
Iván Arregui
JFJose-Manuel Fernandez-Gonzalez
Jose-Manuel Fernandez-Gonzalez
This article presents the design and experimental validation of a W-band waveguide cavity filter operating around 91 GHz, using a periodic electromagnetic bandgap (EBG) structure with glide symmetry to implement the filter in a stack of multiple thin metallic sheets without electric contact between them. The filter is based on vertically stacked cavities that use the TE103 mode, which offers increased robustness to manufacturing and assembly errors due to the large dimensions of the cavity. The glide-symmetric circular hole EBG structure is analyzed and integrated to suppress unwanted field leakage between the metallic layers with a broad stopband. The proposed filter maintains effective operation in the 88–94-GHz frequency range, even with gap variations between layers of up to $20~\mu $ m. The filter is fabricated using laser cutting, achieving a low surface roughness and high dimensional accuracy. Experimental measurements show excellent agreement with the simulations, with a return loss greater than 20 dB and an insertion loss below 0.5 dB. These results demonstrate the possibility to achieve high performance filters at millimeter-wave frequencies while maintaining low fabrication complexity and cost using the multilayer waveguide technology.

22 February 2025 in AEU - International Journal of Electronics and Communications
Verified
Journal Article
Open access
CSCleofás Segura-Gómez
Cleofás Segura-Gómez
ABAndrés Biedma-Pérez
Andrés Biedma-Pérez
DSDavid Santiago
David Santiago
Ángel Palomares-CaballeroÁngel Palomares-Caballero
Ángel Palomares-Caballero
IAIván Arregui
Iván Arregui
Pablo PadillaPablo Padilla
Pablo Padilla

8 October 2025 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
MFMu Fang
Mu Fang
DSDavid Santiago
David Santiago
Jian YangJian Yang
Jian Yang
IAIvan Arregui
Ivan Arregui
MLMiguel A. G. Laso
Miguel A. G. Laso
Ahmed Abdelwahed KishkAhmed Abdelwahed Kishk
Ahmed Abdelwahed Kishk
A co-aperture dual-band linearly polarized slot array based on ridge gap waveguide (RGW), operating at the 74 - 78 GHz and 102 - 106 GHz bands, is designed. In each subarray, two groups of longitudinal slots for two frequency bands are excited by a single RGW channel to achieve dual-band unidirectional radiation. Additionally, grooves and notches are implemented inside the RGW structure to improve dual-band matching, and two bandpass filters (BPFs) are incorporated at each side of the subarray to realize independent dual-band feeding while also providing filtering characteristics. The proposed subarray operates as a single channel. It can expand into a multichannel array, enabling multiple-input multiple-output (MIMO) when each subarray is individually excited or broadside radiation when all subarrays are simultaneously excited. A planar array of four subarray columns was fabricated to validate the dual-band concept and its broadside radiation performance. The simulated and measured results show good agreement.