Magnesium oxide nanoparticles (MgO-NPs) were synthesized using the fungal strain Aspergillus terreus S1 to overcome the disadvantages of chemical and physical methods. The factors affecting the biosynthesis process were optimized as follows: concentration of Mg(NO₃)₂·6H₂O precursor (3 mM), contact time (36 min), pH (8), and incubation temperature (35 °C). The characterization of biosynthesized MgO-NPs was accomplished using UV-vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy—energy dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), and dynamic light scattering (DLS). Data confirmed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with a size range of 8.0–38.0 nm at a maximum surface plasmon resonance of 280 nm. The biological activities of biosynthesized MgO-NPs including antimicrobial activity, biotreatment of tanning effluent, and chromium ion removal were investigated. The highest growth inhibition of pathogenic Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans was achieved at 200 μg mL^–1 of MgO-NPs. The biosynthesized MgO-NPs exhibited high efficacy to decolorize the tanning effluent (96.8 ± 1.7% after 150 min at 1.0 µg mL^–1) and greatly decrease chemical parameters including total suspended solids (TSS), total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and conductivity with percentages of 98.04, 98.3, 89.1, 97.2, and 97.7%, respectively. Further, the biosynthesized MgO-NPs showed a strong potential to remove chromium ions from the tanning effluent, from 835.3 mg L^–1 to 21.0 mg L^–1, with a removal percentage of 97.5%.

Zinc oxide nanoparticles (ZnO-NPs) are regarded as one of the most promising kinds of materials in a variety of fields, including agriculture. Therefore, this study aimed to biosynthesize and characterize ZnO-NPs and evaluate their different biological activities. Seven isolates of actinomycetes were obtained and screened for ZnO-NPs synthesis. The isolate MK-104 was chosen and identified as the Streptomyces plicatus MK-104 strain. The biosynthesized ZnO-NPs exhibited an absorbance peak at 350 nm and were spherical in shape with an average size of 21.72 ± 4.27 nm under TEM. XRD and DLS methods confirmed these results. The biosynthesized ZnO-NPs demonstrated activity against plant pathogenic microbes such as Erwinia amylovora, Aspergillus flavus, Aspergillus niger, Fusarium oxysporum, Fusarium moniliform and Alternaria alternata, with MIC values ranging from 15.6 to 500 µg/mL. Furthermore, ZnO-NPs had a significant effect on Meloidogyne incognita, with death percentages of 88.2, 93.4 and 96.72% after 24, 48 and 72 h of exposure, respectively. Vicia faba seeds were treated with five concentrations of ZnO-NPs (12.5, 25, 50, 100 and 200 µg/mL). Low-moderate ZnO-NP concentrations (12.5–50 µg/mL) were shown to promote seed germination and seedling development, while the mitotic index (MI) decreased as the dosage of ZnO-NPs increased. Micronuclei (MNs) and the chromosomal abnormality index increased as well.

Effective lactic acid (LA) production from lignocellulosic biomass materials is challenged by several limitations related to pentose sugar utilization, inhibitory compounds, and/or fermentation conditions. In this study, a newly isolated Bacillus coagulans strain Azu-10 was obtained and showed homofermentative LA production from xylose with optimal fermentation conditions at 50 °C and pH 7.0. Growth of strain Azu-10 and LA-fermentation efficiency were evaluated in the presence of various lignocellulose-derived inhibitors (furans, carboxylic acids, and phenols) at different concentrations. Furanic lignocellulosic-derived inhibitors were completely detoxified. The strain has exhibited high biomass, complete xylose consumption, and high LA production in the presence of 1.0–4.0 g/L furfural and 1.0–5.0 g/L of hydroxymethyl furfural, separately. Moreover, strain Azu-10 exhibited high LA production in the presence of 5.0–15.0 g/L acetic acid, 5.0 g/L of formic acid, and up to 7.0 g/L of levulinic acid, separately. Besides, for phenolic compounds, p-coumaric acid was most toxic at 1.0 g/L, while syringaldehyde or p-hydroxybenzaldehyde, and vanillin at 1.0 g/L did not inhibit LA fermentation. The present study provides an interesting potential candidate for the thermophilic LA fermentation from lignocellulose-derived substrates at the industrial biorefinery level.

Herein, bacterial isolate HIS7 was obtained from contaminated soil and exhibited high efficacy to degrade pyrethroid insecticide cypermethrin. The HIS7 isolate was identified as Lysinibacillus cresolivuorans based on its morphology and physiology characteristics as well as sequencing of 16S rRNA. The biodegradation percentages of 2500 ppm cypermethrin increased from 57.7% to 86.9% after optimizing the environmental factors at incubation condition (static), incubation period (8-days), temperature (35 °C), pH (7), inoculum volume (3%), and the addition of extra-carbon (glucose) and nitrogen source (NH₄Cl₂). In soil, L. cresolivuorans HIS7 exhibited a high potential to degrade cypermethrin, where the degradation percentage increased from 54.7 to 93.1% after 7 to 42 days, respectively. The qualitative analysis showed that the bacterial degradation of cypermethrin in the soil was time-dependent. The High-Performance Liquid Chromatography (HPLC) analysis of the soil extract showed one peak for control at retention time (R.T.) of 3.460 min and appeared three peaks after bacterial degradation at retention time (R.T.) of 2.510, 2.878, and 3.230 min. The Gas chromatography–mass spectrometry (GC–MS) analysis confirmed the successful degradation of cypermethrin by L. cresolivuorans in the soil. The toxicity of biodegraded products was assessed on the growth performance of Zea mays using seed germination and greenhouse experiment and in vitro cytotoxic effect against normal Vero cells. Data showed the toxicity of biodegraded products was noticeably decreased as compared with that of cypermethrin before degradation.

Extensively drug-resistant (XDR) bacteria pose a serious global public health threat due to their high levels of resistance to multiple classes of antibiotics. This study aimed to characterize bacterial isolates obtained from clinical samples, evaluate their antibiotic resistance patterns, and investigate the antimicrobial and anticancer potential of essential oils (EOs) and their nanoemulsions (NEs). A total of 175 bacterial isolates were collected from various clinical sources, identified, and subjected to antibiotic susceptibility testing using both conventional methods and the VITEK^® 2 system. Among these, nine isolates were identified as extensively drug-resistant. Among the tested EOs, carvacrol exhibited the strongest antibacterial activity, with minimum inhibitory concentrations (MICs) ranging from 14 to 35 µg/mL, compared to 8 to 19 µg/mL for meropenem. To enhance its stability and efficacy, carvacrol nanoemulsions (CANE) were prepared via ultrasonication and characterized using zeta potential measurements, which indicated a positive surface charge of +14.2 mV, while dynamic light scattering (DLS) analysis revealed a narrow size distribution with a mean hydrodynamic diameter of 411.3 nm. High-resolution transmission electron microscopy (HR-TEM) showed spherical droplets ranging from 18 to 144 nm in size, with an average diameter of 69 ± 28 nm. The nanoemulsion formulation significantly enhanced antibacterial activity, with MICs reduced to 11 ± 0.0–23 ± 0.21 µg/mL, compared to 14 ± 0.13–35 ± 0.11 µg/mL for pure carvacrol oil. Gas chromatography–mass spectrometry (GC–MS) analysis identified major active constituents, including thymol, methoxyphenyl, estragole, and D-limonene, which are likely contributors to the observed antimicrobial and anticancer effects. In addition, carvacrol nanoemulsions demonstrated potent cytotoxicity against multiple human cancer cell lines (HepG2, MCF-7, PC-3, and Caco-2) while showing minimal toxicity toward normal cells. Confocal microscopy further confirmed apoptosis induction in treated cancer cells, suggesting a mitochondria-mediated apoptotic pathway. In conclusion, this study highlights the strong therapeutic potential of essential oils—particularly carvacrol and its nanoemulsion formulation—as dual-action agents exhibiting broad-spectrum antibacterial activity against XDR pathogens and selective cytotoxicity against cancer cells.

Urtica urens extract was applied for Se/CuO NPs synthesis with investigation of its biological activities and bio-stimulant qualities for Zea mays L. More antimicrobial activity was documented using Se/CuO NPs than U. urens extract against C. albicans, E. coli, S. typhi, B. subtilis, and S. aureus. Moreover less MIC and MBC values of Se/CuO NPs compared to U. urens extract against examined bacteria were recorded. Excellent antioxidant activity of Se/CuO NPs and U. urens extract was documented, with IC50 4.2±0.41 and 5.12 ±0.19 µg/mL, respectively. Anti-hemolysis of U. urens extract was higher than Se/CuO NPs with IC50 4.1±0.12 and 12.26±0.22 µg/mL, respectively. Anticoagulant potential of Se/CuO NPs was better than the U. urens extract via partial thromboplastin time (PPT) and prothrombin time (PT). Se/CuO NPs at 10 ppm caused the highest significant improvement in chlorophyll a and b of maize plants, but the highest value of carotenoids appeared at 20 ppm compared to the control and other treatments. The increase of shoot and root lengths was shown at 10 ppm of Se/CuO NPs by increasing 32.6 and 17.9%, respectively, compared to the control. Thus, novel bimetallic Se/CuO NPs synthesized using U. urens extract displayed antimicrobial, antioxidant, anticoagulant, anti-hemolysis, and plant biostimulant effects.