Using the forced oscillation method and the ultrasonic transmission method, we measure the elastic moduli of a clay‐bearing Thüringen sandstone under dry and water‐saturated conditions in a broad frequency band at [0.004–10, 106] Hz for different differential pressures up to 30 MPa. Under water‐saturated condition, clear dispersion and attenuation for Young's modulus, Poisson's ratio, and Bulk modulus are observed at seismic frequencies, except for shear modulus. The measured dispersion and attenuation are mainly attributed to the drained/undrained transition, which considers the experimentally undrained boundary condition. Gassmann's predictions are consistent with the measured undrained bulk moduli but not with the shear moduli. Clear shear weakening is observed, and this water‐softening effect is stronger at seismic frequencies than at ultrasonic frequencies where stiffening effect related to squirt flow may mask real shear weakening. The reduction in surface free energy due to chemical interaction between pore fluid and rock frame, which is not taken into account by Gassmann's theory, is the main reason for the departure from Gassmann's predictions, especially for this rock containing a large number of clay minerals.
We have developed a method of nonstationary sparse reflectivity inversion (NSRI) that directly retrieves the reflectivity series from nonstationary seismic data without the intrinsic instability associated with inverse filtering methods. We have investigated the NSRI performance in the presence of input error (e.g., the phase shift and the peak frequency of the wavelet), which determined that NSRI results are reasonable in the case of moderate error. NSRI was then applied to data collected from a laboratory physical model made of highly attenuating media, for which true reflectivities were known, but the wave propagation and the filtering mechanism were not. Analysis of data from the physical model, therefore, represented a blind test for evaluating the effectiveness and accuracy of NSRI. The physical model had a specified spatial scale of 1:5000 (relative to the field scale) and an approximate 1:1 velocity scale. Because the input is required by NSRI, attenuation of the P-wave was measured in the laboratory at ultrasonic frequencies with a pulse transmission technique and the spectral ratio method. Although multiples, side reflections from the model boundaries, diffractions, and other event types were clearly observed from the raw data, no preprocessing was done to avoid affecting the filtering effects. Results from the physical modeling data demonstrated that the derived formula for an attenuated seismogram was correct and estimated values were reliable. The functions and advantages of NSRI were confirmed. The compensated seismogram generated by NSRI was superior to that generated using gain-limited inverse filtering. We have also investigated NSRI’s capabilities in analyzing a marine data set from the Gulf of Suez. These examples provided a basis for discussing assumptions and limitations of NSRI.
20 April 2016 in Journal of Geophysics and Engineering