Alexey Zhabin

Dr. Alexey Zhabin

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
LALaurent Ariztia
Laurent Ariztia
AZAlexey Zhabin
Alexey Zhabin
ILIvan Lavrinovich
Ivan Lavrinovich
AFAntoine De FERRON
Antoine De FERRON
MRMarc Rivaletto
Marc Rivaletto
LPLaurent Pecastaing
Laurent Pecastaing
This article presents the electrical and mechanical design of a compact 13-stage 0.5-MV Marx generator operating at a pulse repetition frequency (PRF) of 100 Hz. The fast-switching process of the generator is based on spark gaps, operated under pressurized air and leading to the generation of an output pulsed voltage with a peak of 0.5 MV and a rise time of 15 ns when operated on a 300- $\Omega $ load. Corona-stabilized electrodes are installed near the main gap of the switches to improve their operational stability and increase the PRF. To ensure compactness, the Marx generator is housed in a cylindrical metal vessel with a height of 92 cm and an outer diameter of 34 cm, having a total volume of 74 L. A highly accurate simulation using both PSpice and CST software packages was used to predict the impulse waveform at the output of the generator and to help in optimizing the generator design. The tests show a good agreement between the experimental data and the theoretical predictions.

2 February 2022 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
AZAlexey Zhabin
Alexey Zhabin
AFAntoine De FERRON
Antoine De FERRON
LALaurent Ariztia
Laurent Ariztia
MRMarc Rivaletto
Marc Rivaletto
Bucur-Mircea NovacBucur-Mircea Novac
Bucur-Mircea Novac
LPLaurent Pecastaing
Laurent Pecastaing
This article investigates the electric breakdown along the surface of a cylindrical dielectric, part of a coaxial transmission line. The particular geometry of the insulator is very common, as it is used at the input or output of most high-power, high-voltage (HV) generators. The streamer propagation criterion is used to calculate the flashover voltage. Studies of the dependence of the flashover voltage on the distance between the electrodes obtained in tests with dc voltage and also by applying voltage impulses with different durations and rise times are reported. The highest difference between the estimated values and the experimental data is less than 15%, which proves the applicability of the criterion for determining the surface breakdown voltage within the geometry under study. In particular, the results of these studies are used in the design of a compact 0.5-MV pulsed power system currently under development.

1 August 2020 in Electronics Letters
Verified
Journal Article
Open access
PDF file
ABA.M. Bobreshov
A.M. Bobreshov
AZAlexey Zhabin
Alexey Zhabin
ESE.A. Seregina
E.A. Seregina
GUG.K. Uskov
G.K. Uskov
The improvement of the ultra‐wideband (UWB) biconical antenna directional characteristics at the upper part of the bandwidth by filling the aperture with the inhomogeneous dielectric lens is discussed in this Letter. The inhomogeneity of the filling was achieved by the complex three‐dimensional configuration of the air gaps and the dielectric with constant permittivity. The distribution law of permittivity in the aperture was obtained in the geometrical optics approximation using the law of Lihtenekker for finely dispersed composition of substances with different dielectric constants. The numerical simulations and the experimental measurements of the biconical antenna characteristics have been carried out and the results are presented. The application of the proposed method allows to reduce the level of lateral radiation and to increase the antenna gain and bandwidth. The technique for the lens manufacturing by using 3D printing technologies is presented.

12 January 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ABAnatoly Mikhalovich Bobreshov
Anatoly Mikhalovich Bobreshov
AZAlexey Zhabin
Alexey Zhabin
ARAlexander Dmitrievich Ryazantsev
Alexander Dmitrievich Ryazantsev
VSVladislav Andreevich Stepkin
Vladislav Andreevich Stepkin
GUGrigory Konstantinovich Uskov
Grigory Konstantinovich Uskov
The application of serial connection of step recovery diodes (SRDs) in picosecond pulse generators was investigated in the letter. Parameters of 80 SRDs were measured, and their standard deviation was estimated. It was shown that the deviation of the SRD parameters significantly reduces the efficiency of their serial connection in picosecond pulse generators. It is proposed to select diodes whose dependencies of the stored charge on the direct current has a minor difference between each other to improve generated pulse parameters. It was shown experimentally that using this approach allows to increase the pulse amplitude by a factor of 1.4 and decrease the duration by 90 ps.

19 September 2017 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ABA. M. Bobreshov
A. M. Bobreshov
AZAlexey Zhabin
Alexey Zhabin
VSV. A. Stepkin
V. A. Stepkin
GUG. K. Uskov
G. K. Uskov
A new design of the ultrashort pulse generator based on a step recovery diode (SRD) is presented in this letter. The design schematic features allow us to increase the pulse amplitude, decrease the ringing level, and realize pulse duration tuning. The signal amplitude increase results from the use of an additional inductive energy storage, which accumulates energy of the magnetic field during both charge storing and extraction phases of the generator duty cycle. The ringing level is reduced by including the ringing reduction subcircuit in the design. This subcircuit consists of the Schottky diode to block the negative half-waves of ringing oscillation and the resistor to force oscillation fading. The electronic tuning of the pulse duration is based on the relation between the SRD recovery time and the forward current. In the experiments ultrashort pulses with the duration in a range from 350 psto 1.5 ns and the 40-V amplitude were obtained for a 50-Ω load by varying the diode forward current. The output signal has a good symmetry shape, which is shown both in simulation and experimentally. The measured ringing level was -20.5 dB.

25 March 2024 in High Voltage
Verified
Journal Article
Open access
LALaurent Ariztia
Laurent Ariztia
NINjomza Ibrahimi
Njomza Ibrahimi
AZAlexey Zhabin
Alexey Zhabin
AFAntoine De FERRON
Antoine De FERRON
MRMarc Rivaletto
Marc Rivaletto
LPLaurent Pecastaing
Laurent Pecastaing
Ultra‐wideband (UWB) microwave sources driven by specialised pulsed power generators have experienced a considerable development in the last decade due to their wide domain of new applications such as defence or counter‐terrorism activity. The authors present the main findings of a research dedicated to the development of a pulsed power‐driven electromagnetic field source for disabling improvised explosive devices (IED). The pulsed power generator driving the source is a 13‐stage compact Marx producing voltage pulses reaching an amplitude of 0.5 MV, with a pulse repetition frequency (PRF) of up to 100 Hz. The generator is coupled to a bipolar pulse forming line, providing bipolar pulses with a dV/dt of around 1.6 MV/ns. This pulsed power system feeds an array composed of 16 Koshelev‐type UWB antennas through an impedance matching transformer. The resulting electromagnetic source is capable to produce pulsed electric fields (PEFs) having a figure‐of‐merit (FOM) of 1 MV. First, practical experiments were carried out to study the effects of the PEFs on targets. The targets used in the present study are M2B type flashbulbs, known to have the same susceptibility as the US army M6 detonator. Different configurations of wires (shielded, twisted, etc) with different lengths were used in connecting items inside these targets. The tests were performed by placing the flashbulbs at different distances to determine the essential parameters (i.e., amplitude, duration, and frequency range) of the PEFs required to trigger them. An overview of the experimental campaign and the main findings are also presented followed by conclusions.