1 July 2014 in Instruments and Experimental Techniques
The efficiency of the X-ray point-projection radiography technique has been demonstrated on a terawatt pulse power generator using a detached compact current generator driving an X-pinch load. This te
13 July 2022 in IEEE Transactions on Plasma Science
Impact-ionization wave triggering of a thyristor enables it to switch significantly higher currents with much faster rise times ( $\text{d}I / \text{d}t$ ) than through conventional triggering; indeed tests on commercial components demonstrate that both current and $\text{d}I / \text{d}t$ can be increased an order of magnitude over their specified datasheet values by utilizing impact ionization. However, creating an impact ionization wave places stringent requirements on the generator used to trigger the thyristor—particularly the trigger pulse must have a voltage rise rate ( $\text{d}V / \text{d}t$ ) of more than 1 kV/ns and an amplitude over twice the thyristors static breakdown voltage. Given the capacitance of a thyristor is relatively large, often hundreds of pF, this is difficult to achieve with many common triggering methods. In this study, we present a bespoke, cost-effective, trigger generator that has been developed based on spiral/vector inversion techniques coupled to an optimized sharpening circuit. Using this generator, both a 2-kV single thyristor and a 4-kV stack of two thyristors in series were triggered in the impact-ionization mode. The thyristors had a wafer diameter of 32 mm and capacitances of 370 pF. With a single thyristor 100 shots were performed with it switching a peak current of 1.25 kA and an associated $\text{d}I / \text{d}t$ of 12 kA/ $\mu \text{s}$ . With two thyristors, peak currents of 2.6 kA and with $\text{d}I / \text{d}t$ of 25 kA/ $\mu \text{s}$ were achieved. In all experiments no degradation of the semiconductor structure was observed. The work opens the way for developing very powerful, but still compact, solid-state trigger generators and larger pulsers for a wide range of pulsed power applications.
8 August 2022 in IEEE Transactions on Plasma Science
This article presents the electrical and mechanical design of a compact 13-stage 0.5-MV Marx generator operating at a pulse repetition frequency (PRF) of 100 Hz. The fast-switching process of the generator is based on spark gaps, operated under pressurized air and leading to the generation of an output pulsed voltage with a peak of 0.5 MV and a rise time of 15 ns when operated on a 300- $\Omega $ load. Corona-stabilized electrodes are installed near the main gap of the switches to improve their operational stability and increase the PRF. To ensure compactness, the Marx generator is housed in a cylindrical metal vessel with a height of 92 cm and an outer diameter of 34 cm, having a total volume of 74 L. A highly accurate simulation using both PSpice and CST software packages was used to predict the impulse waveform at the output of the generator and to help in optimizing the generator design. The tests show a good agreement between the experimental data and the theoretical predictions.
25 May 2023 in IEEE Transactions on Plasma Science
Semiconductor opening switch (SOS) diodes are capable to switch currents with a density of more than 1 kA/cm 2 and withstand nanosecond pulses with an amplitude of up to 1 MV. SOS diodes, however, require a specific pumping circuit that must simultaneously provide forward and reverse pumping currents with a time of $\sim$ 500 and $\sim$ 100 ns, respectively. Such a pumping circuit with energies $>$ 1 J typically requires a gas-discharge switch or a low-efficient solid-state solution. This study proposes a novel approach to pumping SOS diodes based on a spiral generator (SG) (also known as a vector inversion generator). Due to its wave characteristics, the SG produces a bipolar current discharge that meets the time duration and current amplitude required to pump an SOS diode. Moreover, the initial pulse from the spiral typically has a relatively low current amplitude compared to the opposite polarity secondary pulse, so the SOS diode can operate at very high efficiencies. This idea has been tested using an all-solid-state SG coupled with large-area SOS diodes (1 cm 2 ). With this combination, a voltage pulse of 62 kV having a rise time of only 11 ns was obtained on an open circuit load (3 pF, 1 M $\Omega$ ). The experiments were highly repeatable, with no damage to the components despite multiple tests. There is significant scope to further improve the results, with simple alterations to the SG.