Due to the fact that modern technologies are getting smaller and more compact and are anticipated to perform better, there has been an increase in interest in heat transfer enhancement employing hybrid nanofluids in tubes and channels in recent years. This study seeks to establish an outward saw tooth corrugated wall model-based predictive friction characteristic for internal tube flow. Computational Fluid Dynamics (CFD) was used to simulate the model numerically. The response behaviour study was then conducted utilising the Design of Experiment (DOE) and the Response Surface Methodology (RSM). The established surrogate model has led to the consideration of RSM. In this study, the DOE was executed by utilising the Box-Behnken Design (BBD) method with two-level factorial by considering three parametric factors which are: (a) 10000 to 30000 axial Reynolds number, Re, (b) 1mm to 4mm wave amplitude, a, and (c) 5mm to 20mm wavelength, lw. The results showed that the expected response surface values are consistent with the CFD values and that the predictive model is therefore reliable. The R-squared (R2) value is 98.25%, indicating that the model can predict new observations. The wavelength and wave amplitude show significant factors influencing the friction factor which is -0.11235 and 0.14861 respectively and this is based on the normal plot of the effect from the regression model from RSM. These results provide data for estimating the geometric characteristics of tube corrugated wall.
Since the 1990’s, nanofluids have been one of the abundantly preferred newcomer technology invented to assist in electronic and heat transfer purposes. Their thermophysical properties and heat transfer performance make nanofluids highly demanded to overcome the current issues in the world. In this paper, a vast number of applications using nanofluids are reviewed as well as an epitome on the challenges in their respective areas. Additionally, recent research papers for specific applications of nanofluids in improving heat transfer efficiency were outlined while the experimental and theoretical methods were discussed in the articles and journals is summarized in this paper including the effects of thermal properties on the performance of nanofluids. In a nutshell, this review of experimental research extracted from most recent papers, published from 2011 to 2016, is a review on the latest updates in the nanofluids and heat transfer community to help anyone in concern of the topic and enough information to select nanofluids based on their needed applications.
This paper presents a new computational fluid dynamics (CFD) code developed at Universiti Tenaga Nasional for the numerical computation of transonic laminar flow in a compressor rotor. The 3D computational code solves the unsteady Navier-Stokes equations (NSE) on unstructured hexahedral mesh by using second-order accurate central differencing scheme on both convective and diffusive terms. Artificial damping terms are added to control the stability of the numerical scheme, and the explicit multistage Runge-Kutta time-integration technique is performed to solve the unsteady NSE. This paper discusses the simulation of compressible flow field in an axial-flow compressor rotor using the newly developed CFD code. The predicted flow is then compared with the results obtained from the commercial code, CFX-5, as well as experimental data; good agreement is found.
In the current research, an axisymmetric model is developed to study high-speed unsteady flow in the test section of a 7 meter-long shock tunnel. The computational calculations of the shock tunnel are conducted using the Fluent CFD solver. The Finite Volume Method (FVM) is used to discretize the governing equations of mass, momentum, and energy. The accuracy of the numerical model is investigated with first-order upwind, second-order upwind, and third-order MUSCL schemes. Adaptive mesh refinement is implemented to resolve the shock wave and contact surface regions accurately. The numerical results are compared with theoretical calculations and experimental data from experimental tests and the comparison shows good agreement. Different test gases of Helium, Air and CO2, are utilized in the current study. The results show that steady test conditions are maintained for a longer test time by adjusting the pressure ratio and gas combination across the diaphragm. The highest shock wave speed and strength are achieved for a gas combination of Helium-CO2, but a longer test duration is observed when using Air as the test gas.