Peanuts (Arachis hypogea) can be made into various products, from oil to butter to roasted snack peanuts and candies, all from the kernels. However, the skin is usually thrown away, used as cheap animal feed, or as one of the ingredients in plant fertilizer due to its little value on the market. For the past ten years, studies have been conducted to determine the full extent of the skin’s bioactive substance repertoire and its powerful antioxidant potential. Alternatively, researchers reported that peanut skin could be used and be profitable in a less-intensive extraction technique. Therefore, this review explores the conventional and green extraction of peanut oil, peanut production, peanut physicochemical characteristics, antioxidant activity, and the prospects of valorization of peanut skin. The significance of the valorization of peanut skin is that it contains high antioxidant capacity, catechin, epicatechin resveratrol, and procyanidins, which are also advantageous. It could be exploited in sustainable extraction, notably in the pharmaceutical industries.
Finding consensus is one of the most important tasks in multi-agent robot motion coordination research, especially in a communication environment. This justification underlies the use of event-triggered controller in current multi-agent consensus research. However, the communication issue has not been adequately addressed in a broadcast communication environment for rendezvous applications. Therefore, the broadcast event-triggered (BET) controller with a new formulation was designed using the Simultaneous Perturbation Stochastic Algorithm (SPSA). Theorems and relevant proofs were presented. Agent performances with the BET controller were evaluated and compared with the conventional broadcast time-triggered (BTT) controller. The results showed an effective motion generated by a multi-agent robot to reach the rendezvous point based on the Bernoulli distribution and gradient approximation of the agent local controller. The BET controller has proven to work more efficiently than the BTT controller when it reaches convergence in less than 40.42% of time and 21.00% of iterations on average. The utilization of communication channels is slightly reduced for BET, which is 71.09% usage instead of fully utilized by BTT. The threshold value of the event-triggered function (ETF) and SPSA parameters affected agent performances. Future research may consider using an effective and efficient BET controller in a complex communication environment with many variations of graph topology networks.
30 October 2023 in Case Studies in Thermal Engineering
Due to the fact that modern technologies are getting smaller and more compact and are anticipated to perform better, there has been an increase in interest in heat transfer enhancement employing hybrid nanofluids in tubes and channels in recent years. This study seeks to establish an outward saw tooth corrugated wall model-based predictive friction characteristic for internal tube flow. Computational Fluid Dynamics (CFD) was used to simulate the model numerically. The response behaviour study was then conducted utilising the Design of Experiment (DOE) and the Response Surface Methodology (RSM). The established surrogate model has led to the consideration of RSM. In this study, the DOE was executed by utilising the Box-Behnken Design (BBD) method with two-level factorial by considering three parametric factors which are: (a) 10000 to 30000 axial Reynolds number, Re, (b) 1mm to 4mm wave amplitude, a, and (c) 5mm to 20mm wavelength, lw. The results showed that the expected response surface values are consistent with the CFD values and that the predictive model is therefore reliable. The R-squared (R2) value is 98.25%, indicating that the model can predict new observations. The wavelength and wave amplitude show significant factors influencing the friction factor which is -0.11235 and 0.14861 respectively and this is based on the normal plot of the effect from the regression model from RSM. These results provide data for estimating the geometric characteristics of tube corrugated wall.
SMEs are small to medium-sized businesses with relatively fewer workers and lower revenues than large companies. However, SMEs also contribute to the local economic growth of a region, so the smooth production process needs to be considered to increase productivity. Applying lean manufacturing (LM) and Ergonomics concepts in the production process is critical because it can overcome smooth production and maintain the health and safety of SMEs workers. LM focuses on minimizing waste, while ergonomics focuses on humans as a source of energy in the smooth running of production activities. So, this study aims to measure the level of understanding of Malaysian and Indonesian SMEs workers on applying LM and Ergonomics concepts on the production floor and determine the effect of these two concepts using the SPSS and SmartPLS4 applications. SPSS serves to measure the validity, reliability and mean for the category of workers' understanding of LM and Ergonomics. SmartPLS4 helps us understand the influence of the two concepts. Based on the calculation of the mean for each variable of LM and ergonomics, it is found that Malaysian workers understand enough compared to Indonesian SMEs workers. As for the effect, Ergonomics has a significant influence on LM.
20 October 2023 in Journal of Advanced Research in Applied Mechanics
Friction and wear between sliding surfaces can lead to various issues in industrial applications, such as increased costs, reduced machine lifespan, loss of functionality, energy loss, and decreased system efficiency. To mitigate these problems, lubricants and coatings are commonly employed. This study aims to investigate the impact of coatings and lubrication on friction coefficient, wear volume loss, and lubricant temperature using the block-on-ring wear test. The effectiveness of different coatings (uncoated, DLC, CrN, and TiALN) and lubricants (anti-friction graphene oxide additive oil and strong nano engine oil additive) in reducing friction and wear is evaluated. The block-on-ring tests are conducted under varying loads (6-60 N), speeds (1450 rpm), lubricant volumes (40 ml), and durations (2-20 min). The coefficient of friction is measured using an inline load cell, wear volume loss is determined by weighing the blocks before and after the experiment, and lubricant temperature is monitored using thermocouples. The results indicate that the coefficient of friction decreases with increasing load, while the lubricant temperature rises. Coated blocks exhibit lower wear volume loss compared to uncoated blocks. Overall, the combination of CrN-coated blocks and anti-friction graphene oxide additive oil demonstrates the best tribological performance.