The European parliament has declared a global “climate and environmental emergency” on 28 November 2019. Given that, climate change is a clear strategic issue all around the world. Then, greenhouse gas emissions are reported by each country to the United Nations Framework Convention on Climate Change (UNFCCC) every year. In addition, The Intergovernmental Panel on Climate Change (IPCC) in the “2006 IPCC Guidelines for National Greenhouse Gas Inventories” give the procedure to calculate and manage the national greenhouse gases (GHG) emissions. However, these guidelines do not provide any method to consider the net carbon dioxide emissions to the atmosphere (released in clinker fabrication minus those due to concrete carbonation) by the Portland cement clinker industry. This topic should be implemented in the climatic models of the next IPCC assessment report. This paper provides an easy procedure of estimating net CO2 emissions proposed in the “recarbonation project” (simplified method); that is to say, carbon dioxide uptake during the service-life stage is considered as the 20% of the CO2 released by the calcination (process emissions), whereas the end-of-life and secondary usage is only the 3% of the CO2 released by calcination. The outcome of this study reveals that 31,290.753 tons of carbon dioxide will be absorbed by the cement-based materials produced in Spain with the cements manufactured from 2005 to 2015.
The European Green Deal and its endeavors will make rapid and far-reaching decisions with major implications for the European cement industry in the short- and longer-term. Accordingly, new measures should be dealt with quickly and effectively to minimize the adverse impact on global warming and global climate change by this sector. The aim of this study is to show and assess the measures to be undertaken to reach carbon neutrality by the Spanish cement industry by 2050. They may be categorized into three broad types based on the main materials: clinker, cement, and concrete. The cement sector must implement breakthrough initiatives, inventions, and technologies regarding the clinker and cement production processes. Furthermore, carbon dioxide uptake by cement-based materials must be considered to achieve the carbon neutrality objective. Accordingly, two methodologies named simplified and advanced, consistent with Guidelines for National Greenhouse Gas Inventories elaborated by the Intergovernmental Panel on Climate Change (IPCC), were selected to model the carbon offsetting by mortars and concretes. Finally, the existing climate change mitigation technologies available in Spain are insufficient to reach the net zero carbon footprint. Therefore, breakthrough technologies such as novel and efficient carbon dioxide capture, utilization, and storage (CCUS) technologies should be implemented by the Spanish cement industry to achieve zero carbon dioxide emissions in 2050.
As the cement industry continues to address its role in the climate crisis, Portugal’s cement industry has started to calculate its net CO2 emissions to become an entirely carbon neutral sector. These emissions are calculated by simply subtracting the total CO2 uptake due to mortar and concrete carbonation from the total CO2 that is emitted during the calcination process (clinker production). However, the procedures given in the Intergovernmental Panel on Climate Change (IPCC) Guidelines for National Greenhouse Gas (GHG) Inventories to report GHG emissions do not contain any element that would grant this calculation method the status of an internationally recognized procedure. Therefore, some climate models are not accurate because they do not account for the carbon dioxide uptake due to concrete and mortar carbonation, as is evidenced in this paper. Climate models have improved since the IPCC’s Fourth Assessment Report (AR4), but they can further improve by implementing carbon dioxide uptake by cement-based materials. In the present paper, a quick and easy method of evaluating net CO2 emissions is utilized (simplified method) along with an advanced method. Portuguese net CO2 emissions of the cement produced from 2005 to 2015 were calculated while taking carbon dioxide uptake during the service-life and end-of-life and secondary usage stages into account. Following the simplified method, 8.7 million tons of carbon dioxide were found to be uptake by mortars and concretes made with Portuguese cement over the ten-year period, in which 37.8 million tons were released due to the calcination process. In addition, an advanced method has been used to estimate the carbon dioxide uptake, which provided only slightly higher results than that of the simplified method (9.1 million tons).
The widespread use of solar-reflective concrete pavements can mitigate climatic change and urban heat islands (UHI) by cooling the pavement surfaces that are made of concrete instead of asphalt. The methodology that was followed is based on the comparison between the asphalt and concrete albedo effects in a specific application and area. In this study, we found that a reduction of temperature in the terrestrial surface, equivalent to the removal of 25–75 kgCO2/m2, could be achieved. Considering all the motorways and freeways of Spain, which is the third country in the world in km, a yearly equivalent carbon dioxide emissions reduction of 13–27 million tons could be reached. This value is quite high considering that the cement sector worldwide released about 2.9 Gigatons of carbon dioxide in 2016. Therefore, there is a positive balance in the use of concrete pavements. Furthermore, concrete is a material completely recyclable at the end of its service life and concrete pavement construction requires local resources, avoiding GHG emissions due to transport. An increase in the Spanish freeway network albedo by replacing asphalt pavements with concrete ones will improve the local climate change mitigation.
Pavements store heat, which is subsequently released into the atmosphere, heating the surrounding air. Therefore, this process contributes to climate change and global warming. For this reason, the use of high-solar-reflectance (albedo) pavements is seen as one of the potential mitigation methods for climate change. Concrete pavements have a much higher albedo than asphalt due to their light gray color compared with black pavements. Accordingly, the widespread utilization of highly reflective concrete pavements will improve local climate change mitigation. Nevertheless, concrete albedo slightly decreases over time because of weathering. Albedo and solar reflectance index (SRI) measurements were taken on actual precast concrete pavements made with different mixes. The methodology applied for this project is based on the comparison between the asphalt and concrete pavements’ reflectivity. Conventional concrete mix designs can provide cool pavements with SRI higher than 29. Replacement of black pavements by highly reflective concrete pavements appeared to be a cost-effective and easily implemented measure to combat climate change. Finally, multidisciplinary studies considering factors such as building materials’ albedo, among other mitigation measures, should be performed to provide more precise and reliable guidance to policymakers, stakeholders, decision makers and urban planners.
The worldwide cement industry plays an important role in addressing the climate change challenge. Brazil’s cement industry currently has 91 cement plants with an installed production capacity of 94 million tons per year and has started to calculate the net CO2 emissions to achieve a carbon-neutral cement sector by 2050. Accordingly, the carbon dioxide uptake due to mortar and concrete carbonation is subtracted from the carbon dioxide emitted by the chemical reaction for the calcination of lime, i.e., the calcination process performed during clinker production. Now-adays, the Intergovernmental Panel on Climate Change (IPCC) Guidelines for National Greenhouse Gas (GHG) Inventories to report the GHG emissions do not include any calculation procedure to consider the mortar and concrete carbonation. However, the Intergovernmental Panel on Climate Change (IPCC)’s Sixth Assessment Report (AR6) recognizes the physico-chemical process known as carbonation. Brazilian net carbon dioxide emissions of cements produced from 1990 to 2019 are estimated considering the carbon dioxide uptake during the service-life and end-of-life and secondary usage stages (Tier 1). This is a fundamental scientific and technological novelty that changes the current approach to estimate the carbon dioxide emissions due to the Portland cement clinker production. Even considering the relative novelty of this approach, it should be promoted in the future and included in the national inventory report (NIR). The carbon dioxide uptake by mortar and concrete carbonation for 30 years is about 140 million tons. Within this thirty-year period about 483 million tons have been released due to the calcination process.