Bu çalışmada Kahramanmaraş ilindeki yapı stoğunun hızlı değerlendirme yöntemi ile incelenmesi amaçlanmıştır. Kısa sürede birçok yapının deprem güvenliği hakkında bilgi sahibi olmak amacıyla yapı stoğunun incelenmesi hızlı değerlendirme yöntemlerinden biri olan P25 hızlı değerlendirme yöntemi ile yapılmıştır. Kahramanmaraş ilinde bulunan kamu binalarından ve özel binalardan ildeki bütün binaları temsil edecek şekilde 342 adet bina seçilmiştir. İncelemede binaların 100 üzerinden puanlamaya tabi tutarak 25 puanın altındaki binalar çok riskli gruba; 25 ila 35 puan arasındaki binalar, ayrıntılı inceleme bandında; 35 puandan yüksek binalar az riskli grupta değerlendirilmiştir. İncelenen 342 adet binadan 100 tanesi çok riskli grupta 121 tanesi ayrıntılı inceleme bandında 121 tanesi az riskli grupta çıkmıştır.
30 December 2022 in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
In this study, the monotonic and hysteretic behavior of poorly detailed reinforced concrete (RC) columns under lateral loads is simply modeled by SAP2000. It has been shown in literature that the flexural, reinforcement slip and shear deformations is contributed to lateral deformation. The monotonic and hysteretic responses of RC columns due to each of these deformations, were determined. Under pushover loading, deformations due to the flexural, reinforcement slip and shear deformations were summed up to create monotonic behavior of the column. The load-deformation curve from the monotonic model were used to create backbone curve of hysteretic pivot model. The monotonic and hysteretic lateral load- displacement curves obtained in this study were compared with the results obtained from experimental studies. It has been shown that SAP2000 and experimental results were in good agreement and the behavior of poorly detailed RC columns are simplified by SAP2000 instead of using the complex analysis methods.
This study evaluates the seismic performance of prefabricated reinforced concrete industrial structures following the February 6, 2023, Kahramanmaraş earthquakes. A total of 595 industrial structures located in Organized Industrial Zones in Kahramanmaraş province were evaluated in terms of post-earthquake damage data officially obtained from the Ministry of Environment, Urbanization and Climate Change. The results indicate that approximately 20% of the industrial structure was severely damaged or collapsed. In the assessments conducted by local municipalities on 96 incomplete prefabricated industrial structures, approximately 13% were found to have sustained heavy damage. The field observations showed that the damage was largely due to inadequacies in the design and manufacturing processes, incompatibilities between project design and field applications, and deficiencies in critical joint details. Especially, the hinged connections at the column-to-rafter beam and column-to-foundation joints are one of the most sensitive points against earthquakes and have played a decisive role in structural damage. The changes in natural vibration periods of ten moderately damaged buildings, which were examined under 3 different scenarios as undamaged, damaged, and retrofitting conditions, were investigated. Findings strongly advocate for revisions in seismic code provisions, strengthened quality control in construction practices, and the adoption of performance-based design approaches for prefabricated systems. This study provides critical empirical evidence to inform future seismic design guidelines and enhance the resilience of industrial facilities against large-magnitude earthquakes.
29 September 2026 in Journal of Structural Engineering & Applied Mechanics
Accurate estimation of lateral displacement in reinforced concrete (RC) columns is essential for performance-based seismic assessment. Total lateral displacement consists of flexural, bar-slip, and shear deformation components; however, commercial structural analysis platforms such as SAP2000 generally consider only flexural deformation, which may lead to overestimation of stiffness and inaccurate prediction of deformation capacity in non-ductile members. Although advanced nonlinear finite element platforms such as OpenSees explicitly represent these mechanisms, their implementation typically requires considerable modeling expertise and computational effort. This study presents a displacement component-based modeling framework within SAP2000 to represent flexural, bar-slip, and shear deformations through a component-based plastic hinge formulation. Rather than proposing new analytical formulations, the framework provides a practical and reproducible implementation strategy for representing individual deformation mechanisms within a commercial structural analysis platform. The proposed methodology is validated against the cyclic responses of an experimental database comprising 24 RC column specimens and is further compared with fiber-based OpenSees simulations in terms of lateral load–displacement response, stiffness degradation, and hysteretic behavior. The results demonstrate good agreement with the experimental responses, indicating that the proposed framework can effectively represent the nonlinear cyclic response of RC columns while explicitly accounting for the contributions of individual deformation mechanisms. The proposed methodology offers a practical intermediate nonlinear assessment approach between simplified engineering models and computationally demanding distributed-plasticity simulations for the seismic performance evaluation of existing RC structures.