Tijen Pamir

Prof. Dr. Tijen Pamir

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EDElif Ercan Devrimci
Elif Ercan Devrimci
HKHande Kemaloğlu
Hande Kemaloğlu
Cem PeskersoyCem Peskersoy
Cem Peskersoy
TPTijen Pamir
Tijen Pamir
MTMurat Türkün
Murat Türkün
This study evaluated the effect of various adhesive systems, particularly silane application, on the repair bond strength of a nanofill resin composite and associated stress distribution using finite element analysis (FEA). A total of 105 composite specimens (4 × 6 mm) were aged by thermal cycling (10,000 cycles), roughened, etched with phosphoric acid, and assigned to seven groups (n = 15): G1. control—no adhesive; G2. Single Bond Universal Adhesive; G3. composite primer; G4. PQ1; G5. Silane + PQ1; G6. Clearfil Universal Bond; G7. All-Bond Universal. Shear bond strength was measured using a universal testing machine (1 mm/min), and failure modes were microscopically classified. FEA was conducted under static and fatigue conditions using 3D models built in Fusion-360. Mechanical properties were obtained from technical data and the literature. A 300 N load was applied and contact detection (0.05 mm) and constraint zones were defined. Statistical analysis was performed using one-way ANOVA and Tukey’s HSD (p = 0.05). Pearson’s correlation was used to assess the relationship between bond strength and von Mises stress. The highest bond strength was found in G2 (21.54 MPa) while G1 showed the lowest (8.86 MPa). Silane-treated groups exhibited favorable stress distribution and a strong correlation between experimental and simulated outcomes. Silane applications significantly enhance composite repair performance.

27 April 2026 in Selcuk Dental Journal
Verified
Journal Article
Closed access
ETEge Türkmen
Ege Türkmen
İBİpek Ören Bozyer
İpek Ören Bozyer
HKHande Kemaloğlu
Hande Kemaloğlu
TPTijen Pamir
Tijen Pamir
Amaç: Farklı evde beyazlatma ajanlarının, herhangi bir renklendirici ajana maruz bırakılmadan 14 günlük beyazlatma uygulaması boyunca ve beyazlatma sonrası 1 haftanın sonunda beyazlatma performanslarının ve renk stabilitelerinin in-vitro değerlendirilmesi amaçlanmıştır.Gereç ve Yöntemler: Bu çalışmada, yedi farklı evde beyazlatma ajanı için toplamda yedi ayrı grup oluşturulmuştur. Dişler (n=8), gruplar arasında rastgele dağıtıldıktan sonra, 14 gün boyunca belirlenen beyazlatma ajanı ile tedavi edilmiştir. Beyazlatma uygulamasının ardından, dişler bir sonraki uygulamaya kadar ve beyazlatma sonrası birinci haftanın sonuna kadar yapay tükürük ortamında bekletilmiştir. Renk ölçümleri, dijital spektrofotometre aracılığıyla başlangıç değerleri, 7. ve 14. günlerde, ayrıca beyazlatma işlemi sonrasında 7. günün sonunda gerçekleştirilmiştir. Elde edilen renk değişim verileri, CIE2000 renk sistemi kullanılarak analiz edilmiştir.Bulgular: Beyazlatma tedavisinin sonunda tüm gruplarda algılanabilir ve kabul edilebilir eşik değerlerin üzerinde beyazlatma etkisi gözlenmiştir. Grupların başlangıç-14. gün ΔE değerleri ise sırasıyla P: 9,60; Z: 8,14; WP: 10,22; Op16: 10,43; Op10: 11,72; Op6: 5,81; B: 6,37 olarak; başlangıç-BS 1.hafta ΔE değerleri ise sırasıyla P: 7,92; Z: 6,95; WP: 6,14; Op16: 5,46; Op10: 7,72; Op6: 4,26; B: 6,10 olarak tespit edilmiştir. 14.gün- 1.hafta ΔE değerleri ise sırasıyla P: 5,27; Z: 3,63; WP: 6,78; Op16: 6,84; Op10: 5,95; Op6: 2,12; B: 1,66 olarak bulunmuştur.Sonuçlar: Çalışmada kullanılan bütün evde beyazlatma ajanlarıyla beyazlatma uygulamaları sonucunda algılanabilir ve kabul edilebilir eşik değerlerin üzerinde beyazlık sağlanmıştır. Eşdeğer HP içeriğe sahip evde beyazlatma ajanlarının sağladığı beyazlatma etkinliğinin birbirlerine benzer bulunmuştur. HP içerikli ajanlarda beyazlatma tedavisi sonrası 1 haftalık kritik dönemde elde edilen beyazlığın daha stabil olduğu sonucuna varılmıştır.Anahtar Kelimeler: Diş beyazlatma, diş beyazlatma ajanları, dişte renk değişikliği

12 May 2026 in Antibiotics
Verified
Journal Article
Open access
PDF file
İBİpek Ören Bozyer
İpek Ören Bozyer
KMKhairul Matin
Khairul Matin
TPTijen Pamir
Tijen Pamir
SBSema Belli
Sema Belli
Yasushi ShimadaYasushi Shimada
Yasushi Shimada
Background: Biofilm formation and associated tooth demineralization are key factors influencing the clinical performance of dental materials. Methods: This study compared the antibiofilm and demineralization preventive effects of two zinc-modified glass ionomer cements (Zn-GICs) with a conventional GIC. Disk-shaped specimens of Caredyne Restore (CR), ChemFil Rock (CFR), and Ketac Molar (KM) (n = 6) were evaluated in a multi-species biofilm model using an oral biofilm reactor. Early biofilm formation was analyzed by scanning electron microscopy (after 2 h and 4 h), bacterial accumulation and water-insoluble glucan (WIG) production were quantified (after 12 h). For demineralization assessment, restored human enamel and dentin specimens (n = 6) including an additional resin-based control group (Dura Seal, DS) were subjected to a 14-day biofilm challenge and lesion depth was measured using swept-source optical coherence tomography and confocal microscopy. Results: CR showed significantly lower bacterial accumulation and WIG production than the other materials (p < 0.05). CFR demonstrated lower bacterial levels than KM (p < 0.05), whereas no significant differences were observed between CFR and KM in WIG production (p > 0.05). CR produced the shallowest enamel and dentin lesions, whereas DS exhibited the deepest (p < 0.05); however, no statistically significant differences were observed between CFR and KM in lesion depth (p > 0.05). Conclusions: CR demonstrated superior biofilm suppression and reduced demineralization, whereas CFR showed limited differences compared with the conventional GIC.

1 January 2026 in Journal of Oral Science
Verified
Journal Article
Open access
PDF file
EDElif E. Devrimci
Elif E. Devrimci
HKHande Kemaloğlu
Hande Kemaloğlu
IGİdIl Gönüllü
İdIl Gönüllü
IİILGIN İLGENLİ
ILGIN İLGENLİ
TPTijen Pamir
Tijen Pamir
MTMurat Türkün
Murat Türkün
Purpose: This study investigated whether nano-hydroxyapatite (nHAp) can reduce the adverse effects of high-concentration hydrogen peroxide (HP) bleaching – such as mineral loss and surface softening – while maintaining whitening efficacy. Incorporation of nHAp into the bleaching gel was also compared with its application after bleaching.Methods: Sixty bovine enamel specimens were randomly assigned to six groups and treated with different HP-based protocols with or without nHAp. Color change (ΔE) was measured using spectrophotometry, microhardness with the Vickers test, and surface morphology and elemental composition using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS).Results: All HP-treated groups showed significant color improvement (ΔE > 3.3, P < 0.05). Post-bleaching nHAp application produced higher ΔE values than bleaching alone, though not to a significant degree. The highest ΔE was observed in the group receiving HP followed by nHAp. Post-bleaching nHAp significantly improved microhardness and calcium content in the Opalescence group, while effects in the BioWhiten group were limited and not significant. SEM analysis revealed superficial granular deposits and partial surface coverage in nHAp-treated specimens, particularly after post-bleaching application.Conclusion: Incorporation of nHAp during or after HP bleaching can reduce enamel alterations while preserving whitening efficacy, particularly when applied after bleaching in systems lacking intrinsic remineralizing components.

18 September 2026 in Oral
Verified
Journal Article
Open access
PDF file
ETEge Türkmen
Ege Türkmen
İBİpek Ören Bozyer
İpek Ören Bozyer
HKHande Kemaloğlu
Hande Kemaloğlu
TPTijen Pamir
Tijen Pamir
Objectives: This in vitro study evaluated whether coffee exposure during and after at-home bleaching compromises whitening efficacy and long-term color stability across seven bleaching agents differing in active ingredient, concentration, and remineralizing content. Methods: Eighty-four human maxillary incisors were stratified by baseline shade and randomly allocated to seven agents and two immersion media (n = 6 per group): 22% carbamide peroxide (CP), 22% CP with amorphous calcium phosphate (ACP), two 16% CP, 10% CP, 6% hydrogen peroxide (HP), and 6% HP with nanohydroxyapatite. Agents were applied daily for 14 days (8 h CP, 2 h HP). Half of the specimens were immersed in coffee for 48 min/day during bleaching and for consumption-equivalent durations during follow-up; controls were kept in artificial saliva. Color was recorded spectrophotometrically at baseline, days 7 and 14, and 1 week, 1 month, and 6 months post-bleaching, expressed as ΔE00 (CIEDE2000). Data were analyzed with a linear mixed model and Tukey HSD test (α = 0.05). Results: During bleaching, material type (p = 0.014) and time (p < 0.001) exerted significant effects; coffee attenuated cumulative whitening in three CP formulations by day 14, whereas HP agents plateaued after day 7. Post-bleaching, material type was the sole determinant of rebound (p < 0.001), with no effect of immersion medium or time. CP agents rebounded more than HP agents, while the ACP-modified 22% CP behaved like HP agents. Conclusions: Coffee restriction is more critical for preserving whitening during the active bleaching phase than for long-term color stability, which is governed by agent composition.