The objective of this paper is to demonstrate how the spatial variability of random soil affects the failure mechanism and the ultimate bearing capacity of foundations buried at various depths. Anonlinear finite-element analysis combined with random field theory is employed to explore the vertical capacity of foundations embedded at different depths in random soil. Different possibilities of shear failures resulting from spatial patterns of soil are demonstrated and are used to explain the significant discrepancy between the bearing capacity of the random soil and that of uniform soil. The effect of the spatial pattern of the soil on the development of shear planes is also investigated, with the coefficients of variation for the bearing capacity demonstrated to be closely related to the shear plane length. The results of the statistical variation in the bearing capacity are provided for different embedment depths, and these are also reported as the failure probability of the footing compared with the established uniform soil bearing capacity. Safety factors are proposed for foundations at different levels of failure probability. This study provides a thorough understanding of the failure mechanisms of footings in random soil, especially where structures can penetrate deeply into soil. (C) 2014 American Society of Civil Engineers.
Suction-embedded plate anchors (SEPLAs) have been developed to answer the growing need for anchors to withstand significant vertical loading. The concept combines the advantage of suction caissons (known penetration depth and location) and ‘drag-embedded' plate anchors (efficiency and low cost). The main issue associated with SEPLAs relates to the keying process, as the anchor is first loaded, and the associated loss of embedment and reduction in capacity. The paper presents a plasticity model developed to predict the trajectory and load development during anchor keying, and up to peak load. Rigid plasticity is assumed, allowing the kinematics of the anchor to be determined from a yield surface and associated plastic potential. The trajectory and performance of a typical SEPLA are predicted using the model, and are compared with results from centrifuge tests and large-deformation finite-element analysis. The anchor loss of embedment ranged from ∼0·2 to 1·5 times the anchor height for loading inclinations between 40° and 90° from the horizontal. The model was used further to calculate the anchor loss of embedment and capacity for varying padeye offsets. Results indicated that the loss of embedment could be reduced significantly by increasing the offset, but at the detriment of the ultimate anchor capacity.