YANG Jichun

Dr. YANG Jichun

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
LZLei Zhao
Lei Zhao
YJYANG Jichun
YANG Jichun
FXFU Xiaoyang
FU Xiaoyang
The changes in the inclusions in 316L stainless steel before and after Ce addition were studied by adding different contents of Ce. The effects of rare earth Ce treatment on the modification of MnS inclusions in steel and the pitting corrosion resistance of 316L stainless steel are studied by field-emission scanning electron microscopy, laser confocal microscopy, the 6% FeCl3 corrosion weight loss test, and Tafel polarization curve test. The results show that the addition of Ce reduces the corrosion rate of stainless steel in 6% FeCl3 solution, and reduces the number and size of corrosion pits. The corrosion resistance is the best at a 0.0082% Ce content. In addition, the addition of Ce reduced the corrosion current density of stainless steel in 3.5% NaCl solution and increased the corrosion potential. The corrosion potential increased from −329 mV to −31.4 mV. Through Ce treatment, the grain is refined and the inclusions in the experimental steel are modified. With the increase in rare earth content, Mn S gradually transforms into Ce2O2 S inclusions. The morphology of the inclusions gradually change from the original long strips to a spherical shape, and the average size is significantly reduced, which improves the corrosion resistance of the stainless steel. The addition of rare earth Ce plays modifies the inclusions and purifies molten steel.

25 January 2024 in Materials
Verified
Journal Article
Open access
PDF file
GFGuangqian Feng
Guangqian Feng
LRLei Ren
Lei Ren
YJYANG Jichun
YANG Jichun
Non-metallic inclusions in steel have great influence on the continuity of the steel matrix and the mechanical properties of steel. The precipitation sequence of Ce inclusions in molten steel is predicted by thermodynamic calculations. The results show that Ce content will affect the precipitation sequence of rare earth inclusions in molten steel, and the formation of CeO2, Ce2O3 and CeAlO3 will be inhibited with the increase in Ce content. Our laboratory smelted the test steel without rare earth additive and the test steel with rare earth Ce additive (0.0008%, 0.0013%, 0.0032%, 0.0042%). It was found that the MnS inclusions and inclusions containing Al, Ca, Mg and Si oxides or sulfides in the steel after rare earth addition were modified into complex inclusions containing CeAlO3 and Ce2O2S. The size of inclusion in steel was reduced and the aspect ratio of inclusion was improved. The addition of Ce also improved the grain size of U75V steel and significantly refined the pearlite lamellar spacing. After mechanical property testing of the test steel, it was found that when Ce is increased within 0.0042%, the tensile and impact properties of U75V steel are also improved.

19 March 2023 in Metals
Verified
Journal Article
Open access
PDF file
GBGuojun Bai
Guojun Bai
YJYANG Jichun
YANG Jichun
WLWenjing Liang
Wenjing Liang
The effect of rare-earth Ce on the evolution behaviour of inclusions in heavy rail steel was studied. The addition of Ce can significantly reduce the number and size of class A, B, D, and Ds inclusions in the heavy rail steel smelting process. According to the statistical analysis of the size of inclusions in steel, the number and size of A and B inclusions in steel tend to decrease significantly, while D and Ds inclusions disappear. Ce splits the aluminium inclusion into several small-sized inclusions and improves the morphology of the large-size aluminium inclusion, thereby making aggregation and growth difficult while facilitating easy floating and removal. Because the addition of Ce reduces the concentration of S element in steel, MnS inclusions are difficult to grow. The decrease in the number and size of core inclusions required for MnS growth leads to a corresponding decrease in the number and size of MnS inclusions. Meanwhile, the S element also easily gathers on the surface of CaO–MgO–Al2O3–SiO2–CeO inclusions, forming composite inclusions that are more easily removed, thus reducing the quantity and size of MnS inclusions.

27 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
YCYue Chen
Yue Chen
YJYANG Jichun
YANG Jichun
XLXiangjun Liu
Xiangjun Liu
To enhance the mechanical characteristics and corrosion resistance of bridge steel, three distinct groups of test steels with varying Ce contents were formulated. The objective was to investigate the influence of rare earth Ce on the microstructure, impact performance, and corrosion resistance of bridge steel. The addition of rare earth elements improves both the impact performance and the corrosion resistance of bridge steels. The present research systematically examines the impact of cerium (Ce) incorporation on the structural and impact performance of bridge construction steels, with particular emphasis on elucidating the fundamental mechanisms governing these modifications. This investigation establishes a comprehensive theoretical framework that facilitates the advancement of next-generation rare earth-enhanced high-performance steel alloys specifically designed for bridge engineering applications. The investigation reveals that rare-earth elements exert a significant influence on microstructural refinement, leading to the diminution of grain size. Additionally, these elements catalyze the modification of inclusion morphology in the test steel, transitioning from an irregular form to a spherical one, with a concomitant decrease in inclusion size. The tested steel with a rare earth mass fraction of 0.0025 wt.% has the best impact performance and the lowest corrosion rate. The impact performance improved by 7.37% compared with the experimental steel without the addition of rare earth elements. The incorporation of rare earth elements has been observed to promote the accumulation of Cu in the rust layer, which contributes to the improved stability of the layer. Concurrently, it has been noted that, for equivalent periods of corrosion exposure, there is a positive correlation between the arc radius of bulk resistance and the incremental levels of rare earth Ce.

3 January 2020 in Metals
Verified
Journal Article
Open access
PDF file
FXFU Xiaoyang
FU Xiaoyang
BPBAI Pucun
BAI Pucun
YJYANG Jichun
YANG Jichun
The hot deformation of 18Cr-5Ni-4Cu nitrogen-alloyed austenitic stainless steel was tested with a Gleeble-1500D simulator in the temperature range of 1273–1473 K and in the strain rate range of 0.01–10 s−1. The Zener-Hollomon parameter method was used to construct a constitutive equation for high-temperature plastic deformation. The energy dissipation diagram of the material was calculated based on dynamic material modelling (DMM). The microstructural variations were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) with energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). The thermodynamic calculation results showed that the addition of nitrogen to 18Cr-5Ni-4Cu steel promoted the formation of Cr2N and gas phases and expanded the austenite phase region; these results were consistent with the XRD test results of the solid solution sample. The hot deformation activation energy after nitrogen addition was 556.46 kJ∙mol−1. The processing map predicted that the optimum hot working regimes were in the temperature range of 1416–1461 K, where ln ε ˙ was 0.75–1 on the power dissipation map. At high temperatures and a small strain rate, dynamic recrystallization easily occurred. The TEM analyses showed that nano-scale M23C6 and Cr2N precipitated at the grain boundary, and NbC with a diameter of approximately 150 nm appeared along the grain boundary, resulting in grain boundary strengthening. The phase precipitation results were consistent with the Thermo-Calc calculation results. The nitrogen solid solution in the steel promoted the precipitation of nitrides, which caused grain boundary strengthening. Thus, the grain boundary stress increased and wedge-shaped grain boundary cracks formed.

27 June 2022 in Processes
Verified
Journal Article
Open access
PDF file
LRLei Ren
Lei Ren
WLWenxiang Liu
Wenxiang Liu
HLHaitao Ling
Haitao Ling
YJYANG Jichun
YANG Jichun
The multiphase flow in the mold has a significant impact on the surface quality of the slab. In this paper, the multiphase flow in the mold is studied by establishing a one-quarter scale water mold, with the aid of a high-speed camera and particle image velocimetry (PIV). The oil phase will make the liquid surface velocity around the nozzle smaller. The greater the viscosity of the oil, the greater the critical water model casting speed and the shallower the critical immersion depth of submerged entry nozzle (SEN). Blowing will enhance the turbulence of the flow field in the mold and have a suppressing effect on the surface velocity. However, the vertical velocity of the narrow surface does not change significantly. The randomness of the bubble entering the mold from the nozzle can easily cause asymmetry of the instantaneous flow. The number of bubbles with a diameter less than 1 mm increase with the increase in gas flow rate. The larger the bubble size, the more buoyant around the nozzle when it escapes. The larger the diameter of bubble, the closer the vortex center of the upper circulation is to the nozzle and the closer the center of the lower circulation is to the narrow surface.