Carbon nanotubes (CNTs) are used in applications ranging from electrical engineering to medical device manufacturing. It is well known that the addition of nanotubes can influence the mechanical properties of various industrial materials, including plastics. Electrospinning is a popular method for fabricating nanomaterials, widely suggested for polymer scaffold manufacturing. In this study, we aimed to describe the influence of single-walled carbon nanotube (SWCNT) suspensions on polymeric poured films and electrospun scaffolds and to investigate their structural and mechanical properties obtained from various compositions. To obtain films and electrospun scaffolds of 8 mm diameter, we used poly-ε-caprolactone (PCL) and poly(cyclohexene carbonate) (PCHC) solutions containing several mass fractions of SWCNT. The samples were characterized using tensile tests, atomic force and scanning electronic microscopy (AFM and SEM). All the studied SWCNT concentrations were shown to decrease the extensibility and strength of electrospun scaffolds, so SWCNT use was considered unsuitable for this technique. The 0.01% mass fraction of SWCNT in PCL films increased the polymer strength, while fractions of 0.03% and more significantly decreased the polymer strength and extensibility compared to the undoped polymer. The PHCH polymeric films showed a similar behavior with an extremum at 0.02% concentration for strength at break.
1 February 2013 in Russian Journal of Applied Chemistry
Oxidation of cyclohexanone to ɛ-caprolactone with stable industrially manufactured hydrogen peroxide derivatives: adduct with urea (urea hydrogen peroxide), sodium perborate, sodium percarbonate (Persol), magnesium monoperphthalate (Dismozon) was studied. Oxidation with urea hydrogen peroxide is the most efficient in hexafluoroisopropanol in the case of preliminary removal of urea in the form of an oxalate. Oxidation with sodium perborate and percarbonate provides high yields in trifluoroacetic acid. The lowest cost process consists in interaction with sodium monoperphthalate (Persol and phthalic anhydride) in an aqueous medium.
1 April 2022 in Russian Journal of Organic Chemistry
The efficiencies of hydrogen peroxide derivatives in the Baeyer–Villiger oxidation of cyclopentanone to δ-valerolactone have been compared. The oxidants used were hydrogen peroxide in acetic, formic, or trifluoroacetic acid, magnesium and sodium monoperoxyphthalates, cumene hydroperoxide, and tert-butyl hydroperoxide. The oxidation was carried out in water, aqueous methanol, and water–ethyl acetate. Sodium and magnesium monoperoxyphthalates turned out to provide high conversion and selectivity under mild conditions.
The use of biodegradable polymers for the surgical reinforcement of musculofascial structures is of considerable practical interest. Research into the applicability of biopolymers should be conducted in comparison with polypropylene, a material used in surgery. Using highly sensitive C-reactive protein (hs-CRP) in blood and interleukin-6 (IL-6) and CD34 (an endothelial marker with angiogenic properties) in tissues, we analyzed the systemic and local tissue responses to polypropylene and biodegradable polymer implantation in 42 laboratory rats over a three-month period. The study confirmed good biocompatibility of both polymers. However, the systemic and tissue responses to the biopolymer, as measured by the studied markers, were significantly less pronounced compared to polypropylene. Persistently elevated levels of hs-CRP and CD34-positive cells in the biopolymer group at three months post-implantation were attributed to ongoing biotransformation processes. The mild inflammatory response following biopolymer implantation confirms not only its bioinert properties but also its potential for practical surgical applications. Elevated levels of hs-CRP and CD34-, as well as IL-6-positive cells in the polypropylene group, warrant further investigation of long-term responses to polypropylene as potential contributors to post-implantation complications. The hs-CRP level correlated with tissue markers IL-6 and CD34, suggesting its utility as a criterion for assessing postoperative adaptation to implanted synthetic materials.