Bolun Cui

Bolun Cui

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
BCBolun Cui
Bolun Cui
JLJohn R. Long
John R. Long
A low-noise feedback amplifier (LNA) with interstage noise matching is implemented in 22-nm fully depleted silicon-on-insulator (SOI)-CMOS technology. Minimum noise figure (NF) is 1.7 dB centered at 28 GHz, and NF remains below 1.98±0.25 dB across a 10-GHz range. Peak gain of the two-stage LNA is 21.5 dB at 22 GHz, and the bandwidth (BW) for |S₂₁ | is 19-36 GHz. Input and output return losses are better than 10 dB across an effective LNA BW of 22-32 GHz. The third-order input intercept is -13.4 dBm at peak gain when dissipating 17.3 mW. Continuous dc power control on the fly is implemented using modulation of FET backgates. When dc power consumption is reduced 5.6 mW, NF increases by less than 0.5 dB, peak gain decreases by 3.6 dB, and input return loss remains better than 10 dB with no change in effective BW.

1 June 2019
Verified
Conference Paper
Closed access
BCBolun Cui
Bolun Cui
JLJohn R. Long
John R. Long
DHDavid L. Harame
David L. Harame
A transformer-feedback low-noise amplifier (LNA) implemented in 22-nm SOI-CMOS with interstage noise matching is described. The LNA peak gain is 21.5dB at 22GHz, with a -3dB bandwidth (BW) of 19-36GHz. Minimum noise figure (NF) is 1.7dB centered at 28GHz, and remains below 2.2dB across 10GHz. Third-order input intercept (IIP 3 ) is -13.4dBm at peak gain when dissipating 17.3mW. Input and output return losses are >10dB across 22-32GHz (effective BW). Modulation of the FET backgate voltage increases NF by <0.5dB, while reducing power consumption to just 5.6mW.

12 March 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
HLHan Liu
Han Liu
BCBolun Cui
Bolun Cui
GLGuike Li
Guike Li
ZZZhao Zhang
Zhao Zhang
JLJian Liu
Jian Liu
NQNan Qi
Nan Qi
This work presents a 112-GBaud wideband linear driver designed to drive Mach–Zehnder modulators (MZMs) for intensity-modulation direct-detection (IM-DD) and coherent optical transmitters. Designed in 180-nm SiGe BiCMOS, the driver employs a distributed driving stage to overcome gain–bandwidth limitations. A low-impedance input artificial transmission line (ATL) is designed to enhance the cutoff frequency, impedance matching, and group delay performances. Equalization (EQ) is embedded within each drive cell in the distributed driving stage to compensate for MZM electrodes and channel losses. A capacitive-division structure is integrated in the drive cells to reduce the input impedance variation of the BJT-based cells across frequencies and EQ configurations. M-derived topologies improve the matching bandwidth between ATLs and the terminations. Trimming shields incorporated into the ATL design tune the high-frequency response and provide a better-matched impedance. The driver attains a 4-Vppd linear output swing with 2.9%-THD, 65-GHz typical −3-dB bandwidth, and 11.3-dB maximum gain peaking at 50 GHz. Time-domain measurements demonstrate clear eye openings for all NRZ, PAM-4, and PAM-8 modulation formats at 112-GBaud rate and beyond. The driver achieves 3.62-pJ/bit energy efficiency with 112-GBaud PAM-4 and 2.41pJ/bit with 112-GBaud PAM-8, which can be further optimized with co-packaged MZM.

2 November 2025
Verified
Conference Paper
Closed access
BCBolun Cui
Bolun Cui
BBBryan Bruins
Bryan Bruins
JFJan Filip
Jan Filip
JLJohn R. Long
John R. Long
Abstract: Coherent optical transmitters supporting new applications demanding Tb/s data rates employ quad Mach-Zehnder modulators (MZMs) and electronic drivers [1]. A 4-channel, broadband linear modulator driver supporting I-Q (e.g., DP-16QAM) and PAM-4 modulation at rates exceeding 100 GBaud (e.g., $200 \mathrm{~Gb} / \mathrm{s}$ PAM-4) in 22 nm FD-SOI CMOS technology is described in this paper. The CMOS driver achieves a differential linear output swing of $\gt 4 \mathrm{~V}_{\text {ppd }}$ into $60 \Omega$ and 95 GHz bandwidth with $17 \pm 2$ ps group delay below 60 GHz. It meets the requirements of both silicon photonic-IC MZMs $(40 \mathrm{GHz}$ BW [2]) and external MZMs (e.g., InP $70-90 \mathrm{GHz}$ BW [3]). Driver bandwidth is extended $3.6 x$ by an on-chip L-C filter, which provides gain peaking and compensates external losses in a transmitter.

19 March 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
YMYingjie Ma
Yingjie Ma
BCBolun Cui
Bolun Cui
GLGuike Li
Guike Li
JLJian Liu
Jian Liu
NWNanjian Wu
Nanjian Wu
LLLIYUAN LIU
LIYUAN LIU
Artificial intelligence computing systems increasingly demand high-bandwidth, high-extinction-ratio, chip-to-chip optical transceivers. Silicon microring modulators (MRMs) are attractive for such transmitters due to their compact footprint and wavelength-division multiplexing capability. However, for a specified extinction ratio, the optical bandwidth for high-Q MRMs and the driver’s RC time constant prevent conventional single-segment MRM drivers from supporting 100 GBaud class PAM4 transmission. This work presents a broadband driver exploiting the feedforward technique for dual-segment MRMs. It extends electro-optical bandwidth while maintaining a high Q-factor and extinction ratio. The input signal is split into low- and high-frequency components that drive the long and short segments of the MRM, respectively. The long segment uses a broadband low-pass driver, whereas the short segment employs a driver with a programmable bandpass response near the Nyquist frequency. The design space is obtained from an equivalent electro-optical model under constant group-delay constraints. Simulations at 1310 nm show that the 3 dB electro-optical bandwidth improves from ~50 to >70 GHz and that a 200 Gb/s PAM4 optical eye diagram exhibits an open eye; the energy efficiency is 1.44 pJ/bit, and the extinction ratio improves from 2 dB to 4.1 dB. The proposed technique provides a tunable electro-optical co-design approach for high-bandwidth-density, high-extinction-ratio silicon photonic transmitters.