Tim Nitzsche

Mr. Tim Nitzsche

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2026 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
TNTim Nitzsche
Tim Nitzsche
PTPaul Uwe Thamsen
Paul Uwe Thamsen
The continuous transport of wastewater from urban areas is a key consideration for modern drainage systems. In particular, densely populated cities must reliably and without interruption discharge large volumes of wastewater. Inverted siphons play a decisive role in this, functioning as important bypasses within these systems. From a technical point of view, inverted siphons operate as pressure pipes, even though they are integrated into a system with a free-flow gradient. This special mode of operation allows the fluid to pass under obstacles and then be raised nearly back to its original level without the use of mechanical transport equipment, such as pumps. However, the composition of the wastewater poses a particular challenge. Wastewater is a heterogeneous medium that contains not only liquids but also numerous solids such as sand, gravel, organic particles, and wet wipes. These solids can accumulate inside the inverted siphon, especially in areas with unfavourable flow conditions. Such deposits often occur on the ascending branch of the inverted siphon and, in the worst case, can lead to partial or complete blockages. This not only impairs wastewater transport but can also cause considerable damage to the structure. In addition, there is a risk of wastewater escaping into the environment, which causes both ecological and hygienic problems. In light of this, investigations were carried out to analyse the influence of different types of bends and the angle of the ascending branch on the tendency to form deposits. The study was conducted with three different types of sediment at fluid velocities v between 0.5 m · s −1 and 1.0 m · s −1 . Four types of bends and ascending angles ϕ of 45° and 90°were considered in the investigations. It can be shown that variations in the type of elbow, the angle of inclination, the flow velocity and the type of sediment have a significant influence on the material discharge from the inverted siphon. The findings contribute to increasing the operational safety of culverts and ensuring trouble-free wastewater transport in the long term.

TRTobias Rinnert
Tobias Rinnert
TNTim Nitzsche
Tim Nitzsche
DBDavid Beck
David Beck
FBFlorian Brokhausen
Florian Brokhausen
PTPaul-Uwe P.U. Thamsen
Paul-Uwe P.U. Thamsen
This paper presents methods and results on optimizing the functionality of pressurized sewerage systems, specifically wastewater pumping stations. A holistic approach is introduced to address major issues in wastewater transport such as sedimentation in suction chambers and fiber-induced issues in wastewater pumps, as well as their effects and detection. A conceptual suction chamber is scaled using hydraulic similarity and is experimentally investigated regarding its susceptibility to sedimentation. Optimization of inlets and manifolds, pumps, and sloped walls contribute to minimizing sedimentation. In terms of wastewater pumps, a semi-open two-channel wastewater impeller is optimized for its efficiency via response surface optimization. The subsequent optimization for functionality showcases the nexus of the two characteristics by means of cut-back and thickened leading edges, which significantly reduce the susceptibility to clogging. Another important consideration in wastewater pump design is the back shroud cavity. Through iterative experiments with different housing recess configurations, the back shroud cavity is optimized to minimize fiber entry and protect the mechanical seal. Lastly, the demonstration of the effects of clogging in the form of transient instationarities in the torque of a wastewater pump underline the importance of optimizing wastewater pumps for their functionality and low susceptibility to clogging.