Ming Foong Soong

Dr. Ming Foong Soong


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2013 in Journal of Vibration and Control
Verified
Journal Article
Closed access
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
WMWan Nor Liza Mahadi
Wan Nor Liza Mahadi
A passive vehicle suspension has constant spring and damper properties that compromise either ride or road holding ability, depending on whether the suspension is designed to be hard or soft. This study examines the implementation of a gear mechanism in a vehicle suspension system to alter its suspension characteristic while keeping the same spring and damper properties. In the study, a rack-and-pinion mechanism was used to modify the suspension force which acted between the sprung and unsprung masses of a quarter vehicle model. The system with proposed suspension layout was modeled mathematically and solved to obtain the vehicle response due to step excitation for various gear ratios. Results indicated that the use of such a mechanism was capable of changing the equivalent suspension force of the system. It was noted that different gear ratios would amplify or reduce the equivalent suspension force, hence emulating a harder or softer suspension setting compared to that of the original suspension. Additionally, it was found that with optimized gear ratio and gear mass, the implementation was capable of overcoming the compromise between the ride and road holding ability associated with conventional passive suspensions, as simultaneous improvement on both criteria was observed.

20 January 2023 in PLOS ONE
Verified
Journal Article
Open access
PDF file
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
ASAhmad Abdullah Saifizul
Ahmad Abdullah Saifizul
KGKah Yin Goh
Kah Yin Goh
SLSu Xian Long
Su Xian Long
The inerter is a two-terminal component that can be added to the spring-and-damper configuration of a suspension system. It has the property that the force exerted is proportional to the relative acceleration at its terminals. Studies have demonstrated the inerter’s benefit of providing superior vibration isolation when it is used in the vehicle suspension of passenger cars. However, similar benefit on another common vehicle class on the roads, namely heavy vehicles, remain to be shown, as these vehicles have vastly different parameter values than passenger cars. This study is an investigation on the performance improvement brought by an inerter in the suspension of common heavy vehicles. In the study, the parameter values of a truck and a bus were adopted in the quarter vehicle model with two different spring-damper-inerter configurations (parallel and serial inerter), and the improvements in vibration isolation and road holding capability were determined by optimization of inertance. Results show that the inerter is similarly effective in providing the said improvements when implemented on heavy vehicles instead of on passenger cars, judging from reductions in sprung mass acceleration and dynamic tire load. It is also observed that the performance benefit is associated with larger optimum inertance than that for passenger cars. Overall, the inerter has been shown to be beneficial in the parallel and serial configurations, both of which are common and can be practically implemented in the suspension of heavy vehicles.

15 June 2017 in PLOS ONE
Verified
Journal Article
Open access
PDF file
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
ASAhmad Saifizul
Ahmad Saifizul
Quarter vehicle model is the simplest representation of a vehicle that belongs to lumped-mass vehicle models. It is widely used in vehicle and suspension analyses, particularly those related to ride dynamics. However, as much as its common adoption, it is also commonly accepted without quantification that this model is not as accurate as many higher-degree-of-freedom models due to its simplicity and limited degrees of freedom. This study investigates the trade-off between simplicity and accuracy within the context of quarter vehicle model by determining the effect of adding various modeling details on model accuracy. In the study, road input detail, tire detail, suspension stiffness detail and suspension damping detail were factored in, and several enhanced models were compared to the base model to assess the significance of these details. The results clearly indicated that these details do have effect on simulated vehicle response, but to various extents. In particular, road input detail and suspension damping detail have the most significance and are worth being added to quarter vehicle model, as the inclusion of these details changed the response quite fundamentally. Overall, when it comes to lumped-mass vehicle modeling, it is reasonable to say that model accuracy depends not just on the number of degrees of freedom employed, but also on the contributions from various modeling details.

5 January 2014 in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
Verified
Journal Article
Closed access
Jing Yuen TeyJing Yuen Tey
Jing Yuen Tey
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
In an effort to reduce cost involving repetitive prototype build–test cycles, it is inevitable that simulation on full vehicle will be carried out during the product development stage. Desired suspension kinematic profiles of a given vehicle parameter are often unknown at the initial design stage. This paper demonstrates a simple methodology to obtain optimized kinematic characteristics against quality of handling performance using this model as predictive model in earliest design stage. A full vehicle model that is inclusive of suspension kinematic profiles and nonlinear damper profiles has been derived to enable the engineer to study the characteristics of the nonlinear elements against the vehicle performance when only limited vehicle data are available in the initial stage. Results suggest that the handling characteristics of a vehicle are sensitive to the changes in suspension kinematic profile. Additionally, the proposed vehicle model is able to provide satisfactory handling objective when measured in transient handling and frequency response compared to other vehicle models. A robust prediction model of the vehicle responses in frequency domain is proposed. It is coupled with the vehicle model employed as predictive model to optimize front toe angle profile against vehicle quality of handling performance measured in frequency domain.

1 December 2013 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
WMWan Nor Liza Wan Mahadi
Wan Nor Liza Wan Mahadi
Inerter is a recent element in suspension systems with the property that the generated force is proportional to the relative acceleration between its two terminals, which is similar to the way a spring reacts to relative displacement and a damper to relative velocity. This paper presents the analysis of a non-linear inerter working in parallel to passive spring and damper of a vehicle suspension to evaluate its effect on vehicles ride. The non-linear inerter was theoretically capable of switching between on and off states depending on whether or not the suspension deflection was beyond a specified free play. In the study, this behavior was represented mathematically as control law which depended on the relative displacement between the sprung and unsprung masses. A mathematical quarter vehicle model incorporating the non-linear inerter was simulated in MATLAB/Simulink to determine the vehicle responses due to road input in the form of step profile for different combinations of free play and inerters on-state proportionality constant called the inertance. Results showed improvements in vehicle ride comfort, as demonstrated by the lower root-mean-squared sprung mass accelerations compared to the ordinary passive suspension with only spring and damper. Additionally, implementation of non-linear inerter gave lower percentage overshoot to step input, indicating better transient response than ordinary passive suspension.

20 June 2024 in Microsystem Technologies
Verified
Journal Article
Closed access
PDF file
GYGoh Kah Yin
Goh Kah Yin
MSMing Foong Soong
Ming Foong Soong
RRRahizar Ramli
Rahizar Ramli
ASAhmad Saifizul
Ahmad Saifizul