17 March 2021 in IEEE Transactions on Microwave Theory and Techniques
This article presents a series voltage-combining Doherty power amplifier (PA) achieving high output power (Pout) and high power-back-off (PBO) efficiency for 28-GHz fifth-generation (5G) applications. We introduce a new transformer-based series output combiner design method to achieve a true-Doherty load modulation that uses a compact footprint. The output stages of the main PA and the auxiliary PA (aux. PA) both use a differential three-stacked FET topology for high output power without posing a reliability issue. The intermediate-node matching is achieved by using a shunt inductor for voltage waveform alignment and efficiency improvement. A modified differential quadrature hybrid is proposed to achieve the desired quadrature power splitting function without the need for an input balun. For the proof of concept, the proposed PA is implemented in a 22-nm CMOS fully depleted silicon-on-insulator (FD-SOI) technology with a core area of 0.2 mm². At 28 GHz, the measured saturated output power (Psat), 1-dB output compression point (OP1dB), and peak power-added efficiency (PAE) are 22.5 dBm, 21.1 dBm, and 28.5%, respectively. State-of-the-art International Technology Roadmap for Semiconductors (ITRS) figure-of-merit (FOM) and power density are achieved. The measured PAE at 6-dB PBO is 22.1%, which results in an efficiency enhancement ratio of 1.56/3.12 with respect to an ideal class-B and class-A PA. The proposed PA can support 2.4-Gb/s 64-quadratic amplitude modulation (64-QAM) and 0.8-Gb/s 256-QAM signal with a competitive average PAE. Excellent device reliability is validated by operating the implemented PA under 3-dB gain compression point for 12 h with less than 0.06-dB Pout variation. The proposed Doherty PA with a compact footprint is suitable for the integration purpose of future 5G multiple-input multiple-output (MIMO) and phased-array applications.
12 January 2022 in IEEE Journal of Solid-State Circuits
This article presents novel methodologies and practical design considerations for a $D$ -band transmit/receive (T/R) front-end module (FEM) in 22-nm fully depleted silicon-on-insulator (FD-SOI/FDX) CMOS technology for beyond-5G wireless communication. An ABCD-matrix-based synthesis methodology is proposed to co-design the T/R switch (SW) topology, including the power amplifier (PA) output and the low noise amplifier (LNA) input matching networks, to minimize the losses in both Tx and Rx modes. Based on this synthesis, an asymmetric T/R SW topology is realized with intrinsic electrostatic discharge (ESD) protection. Both the stacked-field-effect transistor (FET) PA and LNA adopt differential topologies with transformer-based matching networks to eliminate unwanted effects from common-mode parasitics. Passive gain-boosting techniques are used for both PA and LNA to enhance different TRx specifications. A reusable unit-cell layout strategy is applied for transistor arrays to accelerate the multiple-stage PA implementation and maintain uniform performance and minimal parasitics. At 140 GHz, the Tx achieves a power gain $G_{p}$ of 33.6/35.7 dB, a saturated output power $P_{\mathrm{ sat}}$ of 12.5/14.7 dBm, a peak power-added efficiency (PAE) of 10.8/11.3%, and an output 1-dB compression point (OP1dB) of 9.4/11.2 dBm with nominal/boosted supplies. An average output power ( ${P_{out}}_{avg}$ )/PAE of 4.9 dBm/2% is obtained for a 4-GHz bandwidth 64-QAM single-carrier signal at an error-vector magnitude (EVM) of −24.8 dB. Moreover, its Tx-mode reliability has been assessed. At 140 GHz, the Rx achieves a 20-dB $G_{p}$ , a −24-dBm input 1-dB compression point (IP1dB), and a 9.2-dB noise figure (NF) with only 20-mW power consumption from a 0.8-V supply. This compact FEM has a PA/LNA core area of 0.024/0.032 mm 2 , respectively.
1 July 2016 in IEEE Journal of Solid-State Circuits
A polar transmitter (TX) is implemented at 60 GHz, enabling a power amplifier (PA) to operate in saturation where efficiency is highest, even when handling higher order modulations such as QPSK and 16-QAM. The phase path is upconverted by I-Q mixers, while the amplitude path modulates an RF-DAC. Aimed at 802.11ad applications, the 10 GS/s (i.e., 6x-oversampled) polar TX realizes more than 30 dB alias attenuation, and the input bandwidth exceeds 3.1 GHz. The PA saturated output power is 10.8 dBm with 29.8% drain efficiency at the maximum RF-DAC code. Average output power is 8.1 dBm with 22.3% drain efficiency at -20.7 dB EVM for QPSK modulation without RF-DAC predistortion. The corresponding 16-QAM values are: 7.2 dBm average output power with 19.8% efficiency at -16.5 dB EVM. With predistortion, a QPSK modulated output achieves 5.3 dBm average power with 15.3% efficiency at -23.6 dB EVM, while 3.6 dBm average power with 11.6% efficiency at -18.1 dB EVM is realized for 16-QAM. For a sampling rate of 10 GS/s, the TX data rates are 3.33 Gb/and 6.67 Gb/s for QPSK and 16-QAM, respectively. Implemented in 40 nm bulk-CMOS, the core circuit occupies 0.18 mm2 core of the 2.38 mm2 total die area, and consumes 40.2 mW from a 0.9 V supply.
20 May 2020 in IEEE Journal of Solid-State Circuits
This article analyses and demonstrates a 22.5-27.7-GHz fast-lock low-phase-noise bang-bang digital phase-locked loop (PLL) for millimeter-wave (mm-wave) communication. A discrete-time PLL model, together with theoretical transfer functions, gives insight on the functionality of the automatic bandwidth control, on the effect of the gear-shift algorithm for fast lock and on the different noise contributions. The proposed gear-shift algorithm scales up the PLL bandwidth for faster acquisition and orderly reduces it for jitter performance. The PLL contains a digitally controlled oscillator (DCO) based on transformer feedback with a tunable source-bridged capacitor, which allows for a low phase noise (PN) over a wide tuning range (FoM of -184 dBc/Hz and FoMT of -191 dBc/Hz) and for a fine frequency resolution. The PLL occupies 0.09-mm² core area and exhibits 220 fs rms jitter while consuming 25 mW, giving FoMRMS of -239 dB. Its frequency acquisition time improves from 780 to 45 μs with the gear-shift algorithm. For 60-GHz communication, with a frequency multiplication factor of 2.5, this PLL covers all six channels' frequencies of IEEE-802.11ad, allows a transmitter (TX) error vector magnitude (EVM) down to -35.9 dB assuming a TX signal to the noise-plus-distortion ratio (SNDR) of 40 dB, and, thus, is capable of supporting 256 quadrature amplitude modulation (QAM).
30 April 2018 in IEEE Journal of Solid-State Circuits
An eight-way phased-array TRX front-end with RF phase shifting and on-chip transmit/receive switching is implemented in 28-nm CMOS. The TX P 1dBout and RX noise figure (NF) are 10 dBm and 6.8 dB, respectively. The active phase shifter shows less than 5° phase resolution and amplitude errors within ± 0.35 dB. The 9.6-mm 2 chip consumes 231 mW in RX and 508 mW in the TX mode from a 0.9-V supply. When combined with PCB antennas, a ±46° scan angle is obtained with <;0.4 dB peak-to-peak gain ripples without calibration. We also present an approach to express the noise performance of a phased-array receiver in terms of the effective isotropic NF, as an extension to the NF, which is only defined for a two-port system.