High-content cemented soils are critical for modern geotechnical technologies (e.g., pre-bored precast piles), yet their long-term durability remains underexplored. This study investigates the 28- to 365-day mechanical and microstructural evolution of high-content cemented silty clay under freshwater and seawater curing via UCS, SEM, MIP, and XRD. Under freshwater, cement content directly dictated strength, with the 8:2 mix reaching 24.31 MPa at 365 days. However, marginal efficiency analysis confirmed diminishing returns for excessive binder, establishing the 7:3 ratio as the optimal baseline. Seawater exposure induced a biphasic response: a 4.6% early strength gain at 28 days, followed by severe degradation (a 23.5% drop at 365 days). Concurrently, the failure mode shifted to macroscopic “pseudo-ductility,” with peak strain increasing from 2.37% to 3.04%. Crucially, a micro–macro inconsistency emerged: although seawater physically refined the pore structure (micropore proportion doubled to 30.2% at 90 days) via expansive salts filling mesopores, macroscopic strength declined. XRD confirmed this degradation coincides with severe long-term alkaline buffer (Ca(OH)2) depletion. Consequently, lifecycle durability assessments for high-binder marine systems must not rely solely on physical metrics like porosity, but adopt a coupled multi-factor framework prioritizing chemical stability.
The limitations of conventional spot-sampling-based quality inspection in road construction can be effectively addressed by Intelligent Compaction (IC) technology. Acceleration signals acquired from the steel drums of vibratory rollers during the compaction process are widely used for real-time compaction monitoring. The signal-based evaluation framework is the core focus of the present work. First, fundamental mechanisms of vibratory compaction are elucidated. The theory of compaction energy transfer based on stress waves is further elaborated, thus establishing a theoretical foundation for compaction quality assessment based on acceleration signals. Second, a systematic overview of a dedicated signal processing workflow is presented, which comprises three sequential core procedures: signal acquisition, filtering, and time–frequency transformation. Third, Intelligent Compaction Measurement Values (ICMVs) derived from time-domain, frequency-domain, and time–frequency-domain analyses are classified, with their underlying calculation principles clarified. Finally, a comparative analysis of the predictive performance of three types of compaction control indicator prediction models, namely linear regression, traditional machine learning, and deep learning, is performed. Their applicable scenarios are evaluated. Meanwhile, the system architecture and core operational logic of an Internet of Things (IoT)-enabled IC system are introduced. Based on the above systematic analysis, prospective research directions are proposed, which are intended to provide theoretical references and technical guidance for the engineering application of IC technology.