This study investigates the technological and chemical causes of early zinc-coating degradation on cold-formed steel sections produced from DX51D+Z140 galvanized coils. Commercially manufactured products exhibiting early corrosion symptoms were used in this study. The entire processing route, which included strip preparation, cold rolling, hot-dip galvanizing, passivation, multi-roll forming, storage, and transportation to customers, was analyzed with respect to the residual surface chemistry and process-related deviations that affect the coating integrity. Thirty-three specimens were examined using electromagnetic measurements of coating thickness. Statistical analysis based on the Cochran’s and Fisher’s criteria confirmed that the increased variability in zinc coating thickness is associated with a higher susceptibility to localized corrosion. Surface and chemical analysis revealed chloride contamination on the outer surface, absence of detectable Cr(VI) residues indicative of insufficient passivation, iron oxide inclusions beneath the zinc coating originating from the strip preparation, traces of organic emulsion residues impairing wetting and adhesion, and micro-defects related to deformation during roll forming. Early zinc coating degradation was shown to result from the cumulative action of multiple technological (surface damage during rolling, variation in the coating thickness) and environmental (moisture during storage and transportation) parameters. On the basis of the obtained results, a methodology was proposed to prevent steel product corrosion in industrial conditions.
This article examines the interaction of clay minerals with iron ore concentrate in the context of the efficient use of composite mineral resources. The role of the adsorption properties of mineral additives in the formation of interparticle bonds in green pellets is analyzed. Using X-ray diffraction (XRD) and infrared spectroscopy, the dehydration processes of Na- and Ca-montmorillonite were investigated, and the influence of the cation type on the minerals’ ability to retain water was established. The high thermal stability of the structural OH groups of montmorillonite from the IV-layer clay of the Cherkasy deposit was confirmed, which is an important factor during high-temperature processing of mineral raw materials. Electron microscopy results showed that the fourth-layer clay forms an optimal porous composite microstructure, which contributes to increased water-holding capacity and gas permeability of the pellets. A direct correlation between the adsorption capacity of mineral additives and the strength of raw and dried pellets was experimentally confirmed. Montmorillonite with palygorskite from Layer IV, characterized by high adsorption capacity and prolonged dehydration processes, was identified as the most effective composite binding additive. The results obtained deepen scientific understanding of the mechanisms underlying pellet strength formation and have practical significance for the rational and resource-efficient use of mineral resources in the production of iron ore pellets. The results also demonstrate the potential for improving resource efficiency in pellet production through reduced consumption of traditional binder materials.