Advancements in flexible circuit interconnects are critical for widespread adoption of flexible electronics. Non-toxic liquid-metals offer a viable solution for flexible electrodes due to deformability and low bulk resistivity. However, fabrication processes utilizing liquid-metals suffer from high complexity, low throughput, and significant production cost. Our team utilized an inexpensive spray-on stencil technique to deposit liquid-metal Galinstan electrodes in top-gated graphene field-effect transistors (GFETs). The electrode stencils were patterned using an automated vinyl cutter and positioned directly onto chemical vapor deposition (CVD) graphene transferred to polyethylene terephthalate (PET) substrates. Our spray-on method exhibited a throughput of 28 transistors in under five minutes on the same graphene sample, with a 96% yield for all devices down to a channel length of 50 μm. The fabricated transistors possess hole and electron mobilities of 663.5 cm2/(V·s) and 689.9 cm2/(V·s), respectively, and support a simple and effective method of developing high-yield flexible electronics.
The next-generation spectrum access system (SAS) for the Citizens Broadband Radio Service band is equipped with environmental sensors (ESCs) to detect the presence of non-informed incumbent users, which allows the SAS to dynamically reassign spectrum resource for low privilege users to avoid interference. However, the performance of existing single-node detection model is limited by the sensor’s geo-locations; whereas a naive distributed sensing network with improved detection accuracy introduces a high bandwidth overhead due to the frequent communication of spectrum data. In addition, many existing coherent spectrum sensing methods are not feasible for CBRS band due to the unknown operational characteristics of incumbent military wireless applications. To address these issues, we propose a machine learning based non-coherent spectrum sensing system: (F)eder(a)ted (I)ncumbent Detection in CB(R)S (FaIR). FaIR leverages a communication-efficient distributed learning framework, federated learning, for ESCs to collaborate and train a data-driven machine learning model for incumbent detection under minimal communication bandwidth. Our preliminary results show that the federated learning method can exploit the spatial diversity of ESCs and obtain an improved detection model comparing to a naive distributed sensing and centralized model framework. We evaluate the FaIR model with a variety of spectrum waveforms at varying SNRs. Our experiments showed that FaIR improves the average detection accuracy compared to the single-node method, using a fraction of the bandwidth compared to the naive multi-node method.
We demonstrate the first contact resistance measurements of graphene–galinstan (g-g) ohmic contacts in an effort to improve the performance of graphene photonic devices. The nobility of carbon materials provide an interesting graphene sensor application to explore an oxidation free liquid metal - semimetal interface that can be used to lower contact resistance at source/drain terminals of a standard graphene phototransistor. Our methods utilize photopolymerization of the reactive monomer Trimethlylolpropane Triacrylate (TMPTA) in order to fabricate micro structures necessary to overlay liquid metal contacts on graphene. With the use of an industry standard transfer length method (TLM), a contact resistance of −124±28Ω was measured at both standard temperature and pressure. The results from our study suggest that liquid metals such as galinstan are comparable alternatives to rigid semiconductor interfaces and demonstrates interesting boundary characteristics that may lead to heavy chemical doping and associated low resistance contacts that are required to increase sensitivity in graphene photonic devices.