Single-walled carbon nanotubes (SWCNTs) have an advantage in printing thin film transistors (TFTs) due to their high carrier mobility, excellent chemical stability, mechanical flexibility, and compatibility with solution-based processing. Thus, the printed SWCNT-based TFTs (pSWCNT-TFTs) showed significant technological potential such as integrated circuits, conformable sensors, and display backplanes. However, the long-term environmental stability of the pSWCNT-TFTs hinders their commercialization. Thus, to extend the stability of the pSWCNT-TFTs, such devices should be passivated with low water and oxygen permeability. Herein, we introduced the silicon nitride (SiNx) passivation method on the pSWCNT-TFTs via a combination of roll-to-roll (R2R) gravure and the roll-to-roll plasma-enhanced vapor deposition (R2R-PECVD) process at low temperature (45 °C). We found that SiNx-passivated pSWCNT-TFTs showed ± 0.50 V of threshold voltage change at room temperature for 3 days and ±1.2 V of threshold voltage change for 3 h through a Temperature Humidity Test (85/85 test: Humidity 85%/Temperature 85 °C) for both p-type and n-type pSWCNT-TFTs. In addition, we found that the SiNx-passivated p-type and n-type pSWCNT-TFT-based CMOS-like ring oscillator, or 1-bit code generator, operated well after the 85/85 test for 24 h.
Charge carrier polarity tuning in printed thin film transistors (TFTs) is a crucial step in order to obtain complementary printed devices. In this work, we studied the effect of an Al2O3 passivation layer on printed single-walled carbon nanotube (SWCNT) based TFTs to tune the charge carrier polarity. By varying the atomic layer deposition (ALD) temperature and Al2O3 layer thickness, we can tune the doping degree of Al2O3 to tailor the polarity of printed SWCNT-based TFTs (SWCNT-TFTs). The precise control of threshold voltage (Vth) and polarity from p-type to well-balanced ambipolar, and n-type SWCNT-TFTs is successfully demonstrated with high repeatability by optimizing the ALD temperature and Al2O3 layer thickness based on 20 printed samples per test. As a proof-of-concept, inverter logic circuits using the SWCNT-TFT with different polarity types are demonstrated. The ambipolar device-based inverter exhibits a voltage gain of 3.9 and the CMOS-based inverter exhibits a gain of approximately 4.3, which is comparable to the current roll-to-roll (R2R) printed inverter circuits. Different thicknesses of Al2O3 layer, coated by the ALD at different temperatures and thicknesses, provide a deep understanding of the device fabrication and control process to implement the tailored doping method to efficiently realize R2R printed SWCNT-TFT-based complementary electronic devices.
The roll-to-roll (R2R) gravure process has the potential for manufacturing single-wall carbon nanotubes (SWCNT)-based thin film transistor (TFT) arrays on a flexible plastic substrate. A significant hurdle toward the commercialization of the R2R-printed SWCNT-TFT array is the lack of a suitable, simple, and rapid method for measuring the uniformity of printed products. We developed a probing instrument for characterizing R2R gravure printed TFT, named PICR2R-TFT, for rapidly characterizing R2R-printed SWCNT-TFT array that can present a geographical distribution profile to pinpoint the failed devices in an SWCNT-TFT array. Using the newly developed PICR2R-TFT instrument, the current–voltage characteristics of the fabricated SWCNT-TFT devices could be correlated to various R2R-printing process parameters, such as channel length, roll printing length, and printing speed. Thus, by introducing a characterization tool that is reliable and fast, one can quickly optimize the R2R gravure printing conditions to enhance product uniformity, thereby maximizing the yield of printed SWCNT-TFT arrays.
Rapid, accurate, and scalable ion sensing technologies are highly desirable for future flexible healthcare and lab-on-a-chip applications. Here, we present a fully roll-to-roll (R2R) gravure-printed single-walled carbon nanotube complementary ring oscillator (SWCNT-cRO)-based microfluidic ion sensing platform fabricated on a flexible substrate. The proposed platform combines scalable printed complementary electronics with frequency-based ion sensing via electrostatically induced top-gating in aqueous microfluidic environments. The fabricated SWCNT-cRO devices exhibited stable oscillation characteristics, with a high device yield (>80%) and continuous manufacturing capability at a web speed of 5.4 m/min. Printable ethanolamine/zirconium acetylacetonate-based n-doping technology enabled complementary SWCNT transistor operation, while multilayer CYTOP/FG-3650 encapsulation ensured stable electrical operation under ionic aqueous conditions. After integration into a polydimethylsiloxane-based microfluidic channel, the oscillation frequency of the SWCNT-cRO was systematically modulated by Na+ concentration and pH. The sensing mechanism was based on electrostatically induced carrier modulation in n-type SWCNT transistors, resulting in variations in propagation delay and corresponding shifts in oscillation frequency. Compared with conventional ion-sensitive transistor platforms, the proposed approach offers scalable manufacturing, non-contact ion sensing, elimination of external reference electrodes, and direct compatibility with digital frequency-signal processing systems. This work establishes a promising strategy for future low-cost, disposable, and flexible microfluidic sensing platforms for wearable healthcare and lab-on-a-chip applications, ion sensing, and thin-film transistors.
Printed electronics offer a scalable route to large‐area, low‐cost, and flexible electronic systems, but multilayer integration remains limited by differences in ink rheology, film formation, and patterning requirements across functional layers. Here, we present a hybrid gravure–flexographic Roll‐to‐Plate (R2P) printing strategy for fully printed single‐walled carbon nanotube (SWCNT) thin‐film transistors (TFTs) and complementary metal‐oxide‐semiconductor (CMOS) logic circuits. Instead of using a single printing method across the device stack, we assigned flexographic printing to the gate and drain‐source (D‐S) electrodes, while using gravure printing for the dielectric, SWCNT semiconductor, and doping layers. The ∼45 nm‐thick flexographic‐printed gate enabled a uniform gravure‐printed BaTiO 3 dielectric with a thickness of 1.8 ± 0.08 µm and an areal capacitance of 13.2 ± 1.2 nF cm −2 . The resulting p‐ and n‐type SWCNT‐TFTs exhibited mobilities of 0.08 and 0.05 cm 2 V −1 s −1 , respectively. Flexographic D‐S printing also reduced threshold‐voltage variation, improving device uniformity for circuit integration. Using these complementary transistors, we fabricated a fully printed CMOS ring oscillator operating at 60 Hz and a D‐Latch at 5 Hz, demonstrating the potential of layer‐specific hybrid printing for scalable printed CMOS electronics.