Hydrothermal reduction is a promising approach for graphene oxide (GO) reduction since it is environmentally friendly, simple, and cost effective. We present a detailed study of structural changes occurring in graphene oxide during the reduction process. The correlations between the interlayer spacing, chemical states, work functions, surface morphology, level of disorders, the number of layers, and processing time are elucidated. The results reveal that GO flakes remain in the early stage of the reduction process and that they are fully reduced after a 4-h hydrothermal treatment. With an increase in the reduction time, the resulting product, i.e., reduced graphene oxide, has a low oxygen content, small interlayer spacing, and crumbled and wrinkled structures. We are convinced that these properties can be tuned to a desired level for various applications.
Copper Zinc Tin Sulphide (CZTS) is a propitious semiconductor for active absorber material in thin-film solar cells (SCs). Here, SC architecture comprising FTO/ZnS/CZTS/variable HTLs/Au is discussed. Fluorine-doped tin oxide (FTO) and gold (Au) are used as front and back contacts, respectively. Zinc sulphide (ZnS) is used as an active electron transport layer (ETL), while different Cu-based materials (Cu2O, CuO, CuI, and CuSCN) are used as hole transport layers (HTL). A one-dimensional solar cell capacitance simulator (SCAPS-1D) is utilized to simulate the SC structure. Among different Cu-based HTLs, Cu2O is preferred as a potential candidate for high cell performance of CZTS-based SC. The effects of various layer parameters such as thickness, doping density, and carrier concentrations, electron affinity of HTL and absorber, respectively, are also discussed. After optimization of the device, variation of operating temperature and the effect of series and shunt resistance are also taken into consideration. The optimized results of thickness and acceptor concentration (NA) of absorber material are 1.5 µm and approx. 1.0 × 1019 cm−3, respectively. In addition, the function of HTL (with and without) in the designed SC structure is also studied. Capacitance–voltage (C–V) characteristics are also discussed to get an insight of built-in potential. We have achieved cell performances viz. efficiency = 31.86%, short circuit current density = 32.05 mA/cm2, open circuit voltage = 1.19 V, and fill factor = 83.37%.
17 April 2024 in Solar Energy Materials and Solar Cells
Graphene, an atomically thin two-dimensional (2D) material, exhibits outstanding electrical properties and thus has been employed in various electronic devices. However, the device performance strongly depends on the structural variations present in the graphitic lattice, such as crystal domains, grain boundaries, lattice imperfections, dopants, etc., which are nanoscopic in nature. Hence, understanding the correlation between the structure and the electrical properties in the nanoscale is essential. Atomic force microscopy (AFM) techniques provide the best way to picture such relationships, which is particularly in demand for future miniaturized devices. This review article highlights the characterization of the electrical properties of graphene-based materials via AFM-based techniques such as conductive AFM, scanning Kelvin probe microscopy, electrostatic force microscopy, and piezoresponse force microscopy that is certainly beneficial for a broad research community not only working on graphene-based materials but also in the fields of other 2D materials and scanning probe microscopy. Graphical abstract
We have studied the structure on ML Ba/Si(100) by scanning tunneling microscopy (STM). This phase has two mirror symmetric unit cells, and Their combination leads a wavy structure in STM images. We discuss the structure in comparison with previous low-energy electron-diffraction studies, and propose a model of the structure where buckled Ba dimers locate on the second Si layer reconstructed into a dimerized phase.
29 June 2018 in Japanese Journal of Applied Physics
Fabrication of graphene via oxidation–reduction method is a rewarding approach in terms of scalability and cost of production. In this regard, restoration of the lattice defects presents in graphene oxide (GO) during the thermal reduction in the presence of a carbon source is one of the best alternatives. However, the mechanism of restoration is still unclear. This article presents the restoration in the presence of ethanol at a moderately high temperature by using a simple chemical vapor deposition setup, mainly focusing on the contribution of ethanol in the restoration with the increase in reduction time to postulate a possible mechanism. Raman spectroscopy, X-ray photoelectron spectroscopy, and for the first time atomic force microscopy along with Kelvin probe force microscopy were adopted to fulfill the objective.