15 August 2025 in Tetsu-to-Hagane
The reduction disintegration index (RDI) of sintered ore, which is the main raw material of blast furnaces, greatly affects blast furnace operation. In order to improve RDI without deteriorating the reducibility index (RI), sintered ore having a CaO concentration of 20 mass%, which is higher than the conventional 10 mass% when using porous Australian iron ore, was produced, and its effects on the mineral structure, porosity, RI and RDI were evaluated. In the sintered ore having a CaO concentration of 20 mass%, hematite decreased and calcium-ferrite (sum of other component system calcium-ferrite and binary calcium-ferrite), the SFCA-I/SFCA ratio and porosity increased in comparison with that having a CaO concentration of 10 mass%. When Australian iron ore was used as a raw material for sintered ore, RI increased in sintered ore having a CaO concentration of 20 mass% compared with the one having a CaO concentration of 10 mass%. In addition, RDI was improved in the sintered ore having a CaO concentration of 20 mass% compared with the that having a CaO concentration of 10 mass%. This is due to the formation of binary calcium-ferrite instead of secondary hematite, which deteriorates RDI.
15 October 2026 in ISIJ International
The yield in the iron ore sintering process is managed in daily operations as an important indicator of manufacturing costs and CO2 emissions. Currently, general yield operation actions are "feedback" based on yield results, and do not prevent yield loss. In order to prevent yield decline by "feed-forward" type action targeting yield changes, yield prediction based on operating conditions is essential. In this study, we assumed that yield is synonymous with the strength of the discharged sintered cake, and attempted to apply the porous material strength estimation formula to the sintered cake. The sintered cake was divided into a cake pore part lost by crushing and a sintered ore part as a matrix portion containing pores that remain after crushing, and the formulation of cake porosity and sintered ore strength was studied. Using the amount of melt (melting ratio) generated in liquid-phase sintering and its penetration length into the ore as key factors, the estimation formulas for cake porosity and sintered ore strength were built. In addition, experiments using diffusion pairs were carried out to verify the hypothesis regarding the penetration distance. A pot test were carried out to verify the constructed model , and confirmed a good correlation between the calculated yield by bed temperature measured and the blending components, and the actual measured yield.
15 January 2026 in ISIJ International
The reduction disintegration index (RDI) of sintered ore, which is the main raw material of blast furnaces, greatly affects blast furnace operation. In order to improve RDI without deteriorating the reducibility index (RI), sintered ore having a CaO concentration of 20 mass%, which is higher than the conventional 10 mass% when using porous Australian iron ore, was produced, and its effects on the mineral structure, porosity, RI and RDI were evaluated.In the sintered ore having a CaO concentration of 20 mass%, hematite decreased and calcium-ferrite (sum of other component system calcium-ferrite and binary calcium-ferrite), the SFCA-I/SFCA ratio and porosity increased in comparison with that having a CaO concentration of 10 mass%.When Australian iron ore was used as a raw material for sintered ore, RI increased in sintered ore having a CaO concentration of 20 mass% compared with the one having a CaO concentration of 10 mass%. In addition, RDI was improved in the sintered ore having a CaO concentration of 20 mass% compared with the that having a CaO concentration of 10 mass%. This is due to the formation of binary calcium-ferrite instead of secondary hematite, which deteriorates RDI.
1 May 2025 in Tetsu-to-Hagane
The yield in the iron ore sintering process is managed in daily operations as an important indicator of manufacturing costs and CO2 emissions. Currently, general yield operation actions are "feedback" based on yield results, and do not prevent yield loss. In order to prevent yield decline by "feed-forward" type action targeting yield changes, yield prediction based on operating conditions is essential. In this study, we assumed that yield is synonymous with the strength of the discharged sintered cake, and attempted to apply the porous material strength estimation formula to the sintered cake. The sintered cake was divided into a cake pore part lost by crushing and a sintered ore part as a matrix portion containing pores that remain after crushing, and the formulation of cake porosity and sintered ore strength was studied. Using the amount of melt (melting ratio) generated in liquid-phase sintering and its penetration length into the ore as key factors, the estimation formulas for cake porosity and sintered ore strength were built. In addition, experiments using diffusion pairs were carried out to verify the hypothesis regarding the penetration distance. A pot test were carried out to verify the constructed model , and confirmed a good correlation between the calculated yield by bed temperature measured and the blending components, and the actual measured yield.