Janusz Kluczynski

Dr. Janusz Kluczynski

Institute of Robots and Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 2 Gen. S. Kaliskiego St., 00-908 Warsaw 49, Poland
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
MGMeet Gor
Meet Gor
HSHarsh Soni
Harsh Soni
VWVishal Ashok Wankhede
Vishal Ashok Wankhede
PSPankaj Sahlot
Pankaj Sahlot
KGKrzysztof Grzelak
Krzysztof Grzelak
Janusz KluczynskiJanusz Kluczynski
Janusz Kluczynski
Additive manufacturing (AM) is one of the recently studied research areas, due to its ability to eliminate different subtractive manufacturing limitations, such as difficultly in fabricating complex parts, material wastage, and numbers of sequential operations. Laser-powder bed fusion (L-PBF) AM for SS316L is known for complex part production due to layer-by-layer deposition and is extensively used in the aerospace, automobile, and medical sectors. The process parameter selection is crucial for deciding the overall quality of the SS316L build component with L-PBF AM. This review critically elaborates the effect of various input parameters, i.e., laser power, scanning speed, hatch spacing, and layer thickness, on various mechanical properties of AM SS316L, such as tensile strength, hardness, and the effect of porosity, along with the microstructure evolution. The effect of other AM parameters, such as the build orientation, pre-heating temperature, and particle size, on the build properties is also discussed. The scope of this review also concerns the challenges in practical applications of AM SS316L. Hence, the residual stress formation, their influence on the mechanical properties and corrosion behavior of the AM build part for bio implant application is also considered. This review involves a detailed comparison of properties achievable with different AM techniques and various post-processing techniques, such as heat treatment and grain refinement effects on properties. This review would help in selecting suitable process parameters for various human body implants and many different applications. This study would also help to better understand the effect of each process parameter of PBF-AM on the SS316L build part quality.

5 February 2024 in Metals
Verified
Journal Article
Open access
PDF file
Bartłomiej SarzyńskiBartłomiej Sarzyński
Bartłomiej Sarzyński
Lucjan SniezekLucjan Sniezek
Lucjan Sniezek
KGKrzysztof Grzelak
Krzysztof Grzelak
In this article, the significance of additive manufacturing techniques in the production of vehicle parts over the past several years is highlighted. It indicates the industries and scientific sectors in which these production techniques have been applied. The primary manufacturing methods are presented based on the materials used, including both metals and non-metals. The authors place their primary focus on additive manufacturing techniques employing metals and their alloys. Within this context, they categorize these methods into three main groups: L-PBF (laser-powder bed fusion), sheet lamination, and DED (directed energy deposition) techniques. In the subsequent stages of work on this article, specific examples of vehicle components produced using metal additive manufacturing (MAM) methods are mentioned.

19 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MGMeet Gor
Meet Gor
ADAashutosh Dobriyal
Aashutosh Dobriyal
VWVishal Ashok Wankhede
Vishal Ashok Wankhede
PSPankaj Sahlot
Pankaj Sahlot
KGKrzysztof Grzelak
Krzysztof Grzelak
JŁJakub Łuszczek
Jakub Łuszczek
Machine learning (ML) is one of the artificial intelligence tools which uses past data to learn the relationship between input and output and helps to predict future trends. Powder bed fusion additive manufacturing (PBF-AM) is extensively used for a wide range of applications in the industry. The AM process establishment for new material is a crucial task with trial-and-error approaches. In this work, ML techniques have been applied for the prediction of the density of PBF-AM. Density is the most vital property in evaluating the overall quality of the AM building part. The ML techniques, namely, artificial neural network (ANN), K-nearest neighbor (KNN), support vector machine (SVM), and linear regression (LR), are used to develop a model for predicting the density of the stainless steel (SS) 316L build part. These four methods are validated using R-squared values and different error functions to compare the predicted result. The ANN and SVM model performed well with the R-square value of 0.95 and 0.923, respectively, for the density prediction. The ML models would be beneficial for the prediction of the process parameters. Further, the developed ML model would also be helpful for the future application of ML in additive manufacturing.

16 November 2018 in Materials
Verified
Journal Article
Open access
PDF file
Janusz KluczynskiJanusz Kluczynski
Janusz Kluczynski
Lucjan SniezekLucjan Sniezek
Lucjan Sniezek
KGKrzysztof Grzelak
Krzysztof Grzelak
JMJanusz Mierzyński
Janusz Mierzyński
Selective laser melting (SLM) is an additive manufacturing technique. It allows elements with very complex geometry to be produced using metallic powders. A geometry of manufacturing elements is based only on 3D computer-aided design (CAD) data. The metal powder is melted selectively layer by layer using an ytterbium laser. This paper contains the results of porosity and microhardness analysis made on specimens manufactured during a specially prepared process. Final analysis helped to discover connections between changing hatching distance, exposure speed and porosity. There were no significant differences in microhardness and porosity measurement results in the planes perpendicular and parallel to the machine building platform surface.

30 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
Marcin MałekMarcin Małek
Marcin Małek
WŁWaldemar Łasica
Waldemar Łasica
Marta Daniela KadelaMarta Daniela Kadela
Marta Daniela Kadela
Janusz KluczynskiJanusz Kluczynski
Janusz Kluczynski
DDDaniel Dudek
Daniel Dudek
In accordance with the principles of sustainable development, environmentally friendly, low-emission, and energy-intensive materials and technologies, as well as waste management, should be used. Concrete production is responsible for significant energy consumption and CO2 production; therefore, it is necessary to look for new solutions in which components are replaced by other materials, preferably recycled. A positive way is to use glass waste. In order to determine the effect of a significant glass cullet content on the properties of concrete, glass powder was used as a filler and 100% glass aggregate. The cement–glass composite has low tensile strength and brittle failure. In order to improve tensile strength, the effects of adding polypropylene fibres on the mechanical properties of the composite were investigated. With the addition of 300, 600, 900, 1200, and 1500 g/m3 of fibres, which corresponds to 0.0625%, 0.1250%, 0.1875%, 0.2500%, and 0.3125% of cement mass, respectively, flexural strength increased compared with the base sample by 4.1%, 8.2%, 14.3%, 20.4%, and 26.5%, respectively, while the increase in splitting strength was 35%, 45%, 115%, 135%, and 185%, respectively. Moreover, with the addition of fibres, a decrease in slump by 25.9%, 39.7%, 48.3%, 56.9%, and 65.5%, respectively, compared with the reference specimen was determined.

18 February 2020 in Materials
Verified
Journal Article
Open access
PDF file
Janusz KluczynskiJanusz Kluczynski
Janusz Kluczynski
Lucjan SniezekLucjan Sniezek
Lucjan Sniezek
AKAlexander Kravcov
Alexander Kravcov
KGKrzysztof Grzelak
Krzysztof Grzelak
PSPavel Svoboda
Pavel Svoboda
PKPetr Kubeček
Petr Kubeček
The paper is focused on the examination of the internal quality of joints created in a multi-material additive manufacturing process. The main part of the work focuses on experimental production and non-destructive testing of restrained joints of modified PLA (polylactic acid) and ABS (Acrylonitrile butadiene styrene) three-dimensional (3D)-printed on RepRap 3D device that works on the “open source” principle. The article presents the outcomes of a non-destructive materials test in the form of the data from the Laser Amplified Ultrasonography, microscopic observations of the joints area and tensile tests of the specially designed samples. The samples with designed joints were additively manufactured of two materials: Specially blended PLA (Market name—PLA Tough) and conventionally made ABS. The tests are mainly focused on the determination of the quality of material connection in the joints area. Based on the results obtained, the samples made of two materials were compared in the end to establish which produced material joint is stronger and have a lower amount of defects.