Transmission phase gratings of grating constants of 4–12 μm have been designed and fabricated in glass via implantation of helium and nitrogen ions of energies in the 500 keV–1.6 MeV range, through photoresist masks of thickness of 3.3 μm. Multienergy implantations were applied, too. Phase profiles of the gratings were measured via interference and phase contrast microscopy and scanning electron microscopy. Quasisinusoidal profiles were obtained for the finest gratings. The highest first order diffraction efficiencies were around 20%. Dependence of the efficiencies of the gratings on the energy and dose of the implantation have been determined.
Two methods were proposed and implemented for the fabrication of channel waveguides in an Er-doped Tellurite glass. In the first method, channel waveguides were fabricated by implanting 1.5 MeV and 3.5 MeV energy N+ ions through a special silicon mask to the glass sample at various fluences. Those waveguides implanted at a fluence of 1.0 × 1016 ions/cm2 operated up to 980 nm, and showed green upconversion of the Erbium ions. In the second method, channel waveguides were directly written in the Er3+: TeO2W2O3 glass using an 11 MeV C4+ ion microbeam with fluences in the range of 1 · 1014–5 · 1016 ions/cm2. The waveguides worked in single mode regime up to the 1540 nm telecom wavelength. Propagation losses were reduced from the 14 dB/cm of the as-irradiated waveguides by stepwise thermal annealing to 1.5 dB/cm at λ = 1400 nm.
A method for the fabrication of high diffraction efficiency optical transmission gratings with quasi-sinusoidal profile in glasses by microbeams of medium-mass ions of 5–6 MeV energy was devised and demonstrated. Gratings with a 30 μm grating constant have been manufactured and characterized by interference microscopy and microprofilometry. The obtained surface profiles of the gratings were found to be quasi-sinusoidal with up to 265 nm amplitude. Measured highest first-order diffraction efficiencies were around 26% in both Pyrex and IOG glasses. Such gratings could serve as coupling elements in integrated optics and photonic integrated circuits.
High diffraction efficiency optical transmission gratings with quasi-sinusoidal and saw-tooth surface relief profiles were fabricated in Bi12GeO20, Er: LiNbO3 and Er: Fe: LiNbO3 crystals by ion beam implantation. The gratings were directly written by nitrogen ion microbeams at energies of 5 MeV and 10.5 MeV. The finest grating constant was 4 μm. Grating constants for the majority of the gratings were 16 μm. The highest amplitudes of the gratings reached 1600 nm. The highest first-order diffraction efficiency obtained in a sinusoidal grating was 25%, close to the theoretical maximum of 33%. The highest first-order diffraction efficiency of a blazed grating was also 25%, without Littrow optimization. Such gratings can be incorporated into integrated optical biosensors.
Handling of picoliter-to-nanoliter-scale volumes and objects has increasing importance in life sciences. This is the volume scale of cell extractions and individual living cells. Here, we introduce a method of generating a picoliter-scale device by direct writing of picowell arrays on a ZEONOR™ copolymer surface with high-energy medium-mass ion microbeam. Arrays of various microstructures were written in the sample using a microbeam of 10.5 MeV N4+ ions at various implanted ion fluences. The best array was obtained by implantation of annuli of 10 and 11 μm of inner and outer diameters with a fluence of 7.8 × 1012 ions/cm2.
Planar optical waveguides were fabricated in Pr:YLF crystals by ion implantation. In a further step, ridge waveguides were fabricated using precision diamond dicing. These enable strong light confinement and have propagation losses as low as 0.4 dB/cm. To study the influence of ion implantation on the spectroscopic properties, fluorescence and lifetime measurements were conducted in the ridge waveguides. Under blue pumping, small-signal optical gains of 6.5 dB/cm and 5 dB/cm were demonstrated at wavelengths of 607 nm and 639 nm, respectively. These results make ion-implanted ridge waveguides in Pr:YLF promising candidates for compact integrated lasers in the visible spectral region with high output powers in the watt range.